Based on the fundamental principal analysis of static aeroelastics, the paper develops the engineering design method for wing aeroelastic characteristics. On the basis of parameterized aeroelastic model, the impacts of important parameters of composite wing integral skin on rudder effectiveness, static deformation, and static strength are studied. Using the variational analytical method, a sensitivity analysis is carried out to obtain the trends of those critical parameters affecting the rudder effectiveness, which can guide the aeroelastic tailoring optimal design of the rudder effectiveness. Furthermore, the optimized design results are treated to satisfy the engineering requirement and are verified, obtaining the engineering applicable skin ply scheme. The proposed design not only optimizes the rudder effectiveness to fulfill the aircraft performance requirement, but also helps the composite skin of a certain type of aircraft to gain a satisfactory weight reduction of 105 kg (14 % of the total weight).
YANG Jun
,
CHANG Nan
,
GAN Xuedong
,
GAN Jian
,
LIU Jian
. Engineering design and analysis technique of aeroelastic characteristics of composite wing[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2020
, 41(6)
: 523477
-523477
.
DOI: 10.7527/S1000-6893.2019.23477
[1] 管德,钟珂.复合材料翼面的气动剪裁[J].航空学报,1989, 10(5):A221-A226. GUAN D, ZHONG K. Aeroelastic tailoring applied to composite wing[J]. Acta Aeronautica et Astronautica Sinica, 1989, 10(5):A221-A226(in Chinese).
[2] 刘钢, 孙宪学, 陈文浦. 一种面向工程的气动弹性剪裁技术[J]. 航空计算技术, 2006, 36(5):73-75. LIU G, SUN X X, CHEN W P. A technique of engineering-oriented aeroelasticity tailoring aeronautical computing technique[J]. Aeronautical Computing Technique, 2006, 36(5):73-75(in Chinese).
[3] 乌国华.复合材料前掠翼的气弹剪裁[J].复合材料学报, 1986, 3(3):88-98. WU G H. The aeroelastic tailoring of swept forward wings with advanced composite[J]. Acta Materiae Compositae Sinica, 1986, 3(3):88-98(in Chinese).
[4] 王红伟, 王志瑾. 复合材料前掠翼的气动弹性优化[J]. 飞机设计,2011, 31(4):24-29. WANG H W, WANG Z J. Aeroelastic optimization for forward-swept wing of composite material[J]. Aircraft Design, 2011, 31(4):24-29(in Chinese).
[5] 金海波.复合材料飞机结构综合优化设计系统研究[D].南京:南京航空航天大学,2003. JIN H B. Study on the system of composte synthesisoptimization for aircraft structures[D].Nanjing:Nanjing university of Aeronautics and Astronautics,2003(in Chinese).
[6] 万志强,邵珂,杨超,等.非均衡铺层壁板复合材料机翼气动弹性分析[J].复合材料学报,2008(1):196-199. WAN Z Q,SHAO K,YANG C, et al. Aeroelastic analysis of composite wings with unbalance laminates[J]. Journal of Composite Materials,2008(1):196-199(in Chinese).
[7] 李太鹏, 徐元铭. 基于PATRAN/NASTRAN的复合材料结构铺层的分级优化设计方法[J]. 固体火箭技术, 2004, 27(4):308-311, 315. LI T P, XU Y M. A multilevel optimization for layer design of composite structures based on PATRAN/NASTRAN[J]. Journal of Solid Rocket Technology, 2004, 27(4):308-311, 315(in Chinese).
CJA