Automatic fiber placement (AFP) technique is a critical manufacturing process to improve the efficiency of manufacturing components made of composite materials and reduce the cost. The AFP trajectory planning for ply layup is crucial to the quality of the fabrication process. For composite structure with complex contour, a justified placement technique is essential to ensure the manufacturability and the paving quality. In this paper, with a prototype of the simplified tail-cone structure in aft fuselage, different algorithms based on fixed angle, geodesic and variable angle methods are investigated for different layup orientations along a curved contour. The coverage and applicability of each algorithm are revealed and summarized. Conforming to the manufacturability along different layup orientations, the tail-cone prototype is automatically laid-up using prepreg slit tapes of 6.35 mm in width. The finite element analysis method is used to evaluate and validate the algorithms. The results show that the geodesic algorithm should be adopted for the 0° direction placement of tail-cone structure to reduce wrinkles. The fixed angle algorithm is good for the 90° direction layup to ensure continuous placement. To achieve a minimum gap at ±45° direction placement, a variable angle algorithm based on the results of the tow staggering test is adopted to divert the placement direction from the original one to the adjusted one which is closer to the geodesic direction in a curtain principle. For the conic structure, the fiber placement gap leads up to 30% reduction of the ply equivalent modulus and 10% reduction of the total strength. Therefore, the influential factors of AFP process on safety margin should be taken into account in the design of optimal structure.
DUAN Mufeng
,
QIN Tianliang
,
SHEN Yufeng
,
XU Jifeng
. Minimum gap layup algorithms for automatic fiber placement and manufacture of conic composite structure[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2019
, 40(2)
: 522423
-522423
.
DOI: 10.7527/S1000-6893.2019.22423
[1] LUKASZEWICZ D J, WARD C, POTTER K D. The engineering aspects of automated prepreg layup:History, present and future[J].Composites Part B:Engineering, 2012, 43(3):997-1009.
[2] 肖军, 李勇, 文立伟, 等. 树脂基复合材料自动铺放技术进展[J]. 中国材料进展, 2009, 28(6):28-32. XIAO J, LI Y, WEN L W, et al. Progress of automated placement technology for polymer composites[J]. Materials China, 2009, 28(6):28-32(in Chinese).
[3] 杨乃宾. 新一代大型客机复合材料结构[J]. 航空学报, 2008, 29(3):596-604. YANG N B.Composite structures for new generation large commercial jet[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(3):596-604(in Chinese).
[4] MARSH G. Air framers exploit composites in battle for supremacy[J]. Reinforced Plastics, 2005, 49(3):26-32.
[5] SHIRINZADEH B, FOONG C W, TAN B H. Robotic fibre placement process planning and control[J]. Journal of Assembly Automation, 2000, 20(4):313-320.
[6] SHIRINZADEH B, ALICI G, FOONG C W, et al. Fabrication process of open surface by robotic fiber placement[J]. Robotics and Computer-Integrated Manufacturing, 2004, 20(1):17-28.
[7] SHIRINZADEH B, CASSIDY G, OETOMO D, et al. Trajectory generation for open-contoured structures in robotic fiber placement[J]. Robotics and Computer-Integrated Manufacturing, 2007, 23(4):380-394.
[8] LEWIS H W, ROMERO J E.Composite tape placement apparatus with natural path generation means:US Patent, 4696707[P]. 1987-07-14.
[9] ZHANG P, SUN R, ZHAO X, et al. Placement suitability criteria of composite tape for mould surface in automated tape placement[J]. Chinese Journal of Aeronautics, 2015, 28(5):1574-1581.
[10] COOPER A A G. Trajectory fiber reinforcement of composite structure[D]. St. Louis:Washington University, 1972.
[11] HALE R D, MOON R, LIM K, et al. Integrated design and analysis tools for reduced weight, affordable fiber steered composite:KU-FRL-22480-5[R]. Arlington:Office of Naval Research, 2004.
[12] REUSCHEL D, MATTHECK C. Three-dimensional fiber optimization with computer aided internal optimization[J]. Aeronautical Journal, 1999, 109(1027):415-420.
[13] GÜRDAL Z, OLMEDO R. In-plane response of laminates with spatially varying fiber orientations:Variable stiffness concept[J]. AIAA Journal, 1993, 31(4):751-758.
[14] OLMEDO R, GÜRDAL Z. Buckling response of laminates with spatially varying fiber orientations[C]//34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston, VA:AIAA Press, 1993:2261-2269.
[15] WALDHART C, GÜRDAL Z, RIBBENS C. Analysis of tow placed, parallel fiber, variable stiffness laminates[C]//37th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston, VA:AIAA Press, 1996:2210-2220.
[16] 熊文磊. 基于网格化曲面的自动铺丝轨迹规划研究[D]. 南京:南京航空航天大学, 2012. XIONG W L. Research on fiber placement trajectory design algorithm on meshed surface[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2012(in Chinese).
[17] 还大军, 肖军, 李勇. 复合材料自动铺放CAD/CAM软件技术[J]. 航空制造技术, 2010(17):42-45. HUAN D J, XIAO J, LI Y. CAD/CAM software technology for composites automated placement[J]. Aeronautical Manufacturing Technology, 2010(17):42-45(in Chinese).
[18] 周焱, 安鲁陵, 周来水. 复合材料自动铺丝路径生成技术研究[J]. 航空精密制造技术, 2006, 42(2):39-41. ZHOU Y, AN L L, ZHOU L S. Research on composite fiber placement path generation algorithm[J]. Aviation Precision Manufacturing Technology, 2006, 42(2):39-41(in Chinese).
[19] CROFT K, LESSARD L, PASINI D, et al. Experimental study of the effect of automated fiber placement induced defects on performance of composite laminates[J].Composites A:Applied Science & Manufacturing, 2011, 42(5):484-491.
[20] 杨竣博, 宋笔锋, 钟小平. 丝束变角度层合板屈曲性能的有限元分析[J]. 复合材料学报, 2014, 31(4):991-997. YANG J B, SONG B F, ZHONG X P. Finite element analysis on the buckling property of variable angle tow laminate[J]. Acta Materiae Compositae Sinica, 2014, 31(4):991-997(in Chinese).
[21] MARSH G. Automating aerospace composites production with fiber placement[J]. Reinforced Plastics, 2011, 55(3):32-37.
[22] LICHTINGER R. Simulation and experimental validation of gaps and bridging in the automated fiber placement process[J]. Science & Engineering of Composite Materials, 2015, 22(2):131-148.
[23] BLOM A W, LOPE C S, KROMWIJK P J, et al. A theoretical model to study the influence of tow-drop areas on the stiffness and strength of variable-stiffness laminates[J]. Journal of Composite Materials, 2009, 43(5):403-425.
[24] BLOM A W, ABDALLA M M, GÜRDAL Z. Optimization of course locations in fiber-placed panels for general fiber angle distributions[J].Composites Science and Technology, 2010, 70(4):564-570.
[25] BLOM A W. Structural performance of fiber-placed, variable-stiffness composite conical and cylindrical shells[D]. Delft:Delft University of Technology, 2010.
[26] 黄文宗, 孙容磊, 张鹏, 等. 基于响应曲面法的自动铺放工艺参数分析与优化[J]. 玻璃钢/复合材料, 2013(5):37-44. HUANG W Z, SUN R L, ZHANG P, et al. Process parameters analysis and optimization for automated tape laying using response surface methodology[J]. Fiber Reinforced Plastics/Composites, 2013(5):37-44(in Chinese).
CJA