ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Experimental of turbulent flow heat transfer of dimple vortex generators with rounded edge
Received date: 2016-11-28
Revised date: 2017-02-28
Online published: 2017-04-17
Supported by
National Natural Science Foundation of China (51676119,51176111)
An experimental study of the local heat transfer performance and flow friction characteristics in a channel with spherical dimples with rounded edge is conducted using a transient liquid crystal (TLC) thermography technique. Two different rounding schemes for the dimple edge are investigated:the front edge rounding, and the whole edge rounding. The ratio of the dimple print diameter to the duct height is 1.0, the ratio of the dimple depth to diameter is 0.2, and the Reynolds number ranges from 10 000 to 60 000. As is shown in the experiment, the Nussult number of the channel with conventional dimples is about 62.0% higher than that of the smooth channel, with the friction factor being about 73.0% higher than that of the latter. Compared with the conventional dimples, the Nussult number of the dimples with the whole edge rounded is about 3.6% higher, with the friction factor being about 4.6% lower; the Nussult number of the dimples with the front edge rounding is about 11.0% higher, with the friction factor being about 5.2% higher. It is still found that the existence of dimple edge rounding can improve the heat transfer uniformity on the surface of the dimples. The overall thermal performance of the dimples with the front edge rounding is the best, which is about 9.6% higher than that of the normal dimples; while the dimples with the whole edge rounding is about 4.4% higher than that of the normal dimples.
LI Wencan , RAO Yu , LI Bo , QIN Jiang . Experimental of turbulent flow heat transfer of dimple vortex generators with rounded edge[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017 , 38(9) : 520999 -520999 . DOI: 10.7527/S1000-6893.2017.620999
[1] HAN J Q. 燃气轮机传热和冷却技术[M]. 程代京, 谢永慧, 译. 西安:西安交通大学出版社, 2006. HAN J Q. Gas turbine heat transfer and cooling technology[M]. CHENG D J,XIE Y H, translated. Xi'an:Xi'an Jiaotong University Press, 2006(in Chinese).
[2] 杨通海, 朱惠人, 张丽. 窄通道内冲击冷却局部换热特性的瞬态液晶测量[J]. 航空学报, 2009, 30(11):2031-2036. YANG T H, ZHU H R, ZHANG L.Local heat transfer measurements in narrow impingement channel by transient liquid crystal technique[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(11):2031-2036(in Chinese).
[3] 游良平, 陶毓伽, 蔡军. 涡轮叶片前缘复合冷却实验[J]. 航空学报, 2009, 30(9):1618-1623. YOU L P, TAO Y J, CAI J. Experiment of composite cooling on leading edge of turbine blade[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(9):1618-1623(in Chinese).
[4] 刘高文, 张丽, 郭涛. 凹坑强化传热的研究进展回顾[J]. 航空动力学报, 2007, 22(11):1785-1791. LIU G W, ZHANG L, GUO T. A review of heat transfer enhancement with dimpled surface[J]. Journal of Aerospace Power, 2007, 22(11):1785-1791(in Chinese).
[5] AFANASVEV V N, CHUDNOVSKY Y P, LEONTIEV A I, et al. Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate[J]. Experimental Thermal and Fluid Science, 1993, 7(1):1-8.
[6] SCHUKIN A V, KOZLOV A P, AGACHEV R S. Study and application of hemispherical cavities for surface heat transfer augmentation:95-GT-059[R]. New York:ASME, 1995.
[7] RAO Y, LI B, FENG Y. Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimples[J]. Experimental Thermal and Fluid Science, 2014, 61(2):201-209.
[8] MAHMOOD G I, HILL M L, NELSON D L, et al. Local heat transfer and flow structure on and above a dimpled surface in a channel[J]. Journal of Turbomachinery, 2001, 123(1):115-123.
[9] MOON H K, O'CONNELL T, GLEZER B. Channel height effect on heat transfer and friction in a dimpled passage[J]. Gas Turbines Power, 2000, 122(2):307-313.
[10] 赵鹏, 刘高文, 朱晓华, 等. 间距对凹坑强化传热和流动阻力的影响[J]. 航空动力学报, 2009, 24(10):2266-2271. ZHAO P, LIU G W, ZHU X H, et al. Influence of dimple space on heat transfer enhancement and pressure loss in a dimpled rectangular channel[J]. Journal of Aerospace Power, 2009, 24(10):2266-2271(in Chinese).
[11] BURGESS N K, OLIVEIRA M M, LIGRANI P M. Nusselt number behavior on deep dimpled surfaces within a channel[J]. Journal of Heat Transfer, 2003, 125(1):11-18.
[12] RAO Y, XU Y M, WAN C Y. An experimental and numerical study of flow and heat transfer in channels with pin fin-dimple and pin fin arrays[J]. Experimental Thermal and Fluid Science, 2012, 38(1):237-247.
[13] 杨世铭, 陶文铨. 传热学[M]. 北京:高等教育出版社, 2006. YANG S M, TAO W Q. Heat transfer[M]. Beijing:Higher Education Press, 2006(in Chinese).
[14] EKKAD S V, HAN J C. A transient liquid crystal thermography technique for gas turbine heat transfer measurements[J]. Measurement Science and Technology, 2000, 11(7):957.
[15] KAYS W M, CRAWFORD M E. Convective heat and mass transfer, third edition[M]. New York:McGraw Hill, 1993.
[16] GEE D L, WEBB R L. Forced convection heat transfer in helically rib-roughened tubes[J]. International Journal of Heat and Mass Transfer, 1980, 23(8):1127-1136.
[17] KLINE S J, MCCLINTOCK F A. Describing uncer-tainties in single-sample experiments[J]. Mechanical engineering, 1953, 75(1):3-8.
[18] KINGSLEY-ROWE J R, LOCK G D, MICHAEL O J. Transient heat transfer measurements using thermo-chromic liquid crystal:lateral-conduction error[J]. International Journal of Heat and Fluid Flow, 2005, 26(2):256-263.
[19] LIGRANI P M, HARRISON J L, MAHMOOD G I. Flow structure due to dimple depression on a channel surface[J]. Physics of Fluids, 2001, 13(11):3442-3451.
[20] MAHMOOD G I, HILL M L, NELSON D L, et al. Local heat transfer and flow structure on and above a dimpled surface in a channel[J]. Journal of Turbomachinery, 2001, 123(1):115-123.
/
| 〈 |
|
〉 |
CJA