WANG Xiaoyuan , GUO Hao , XING Yu , LIU Peiqing . Mechanism test on aero acoustic characteristics of LAGOON landing gear wheel cavities[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017 , 38(5) : 120549 -120549 . DOI: 10.7527/S1000-6893.2016.0302

[1] 张卫民, 郝璇, 陈大斌, 等. 大型客机气动噪声预测[J]. 航空制造技术, 2010(14):66-69. ZHANG W M, HAO X, CHEN D B, et al, Aeroacoustic prediction of large commercial aircraft[J]. Aeronautical Manufacturing Technology, 2010(14):66-69 (in Chinese).
[2] 黄文超, 秦浩明. 中国民机产业发展中存在的主要声学问题及研究规划[C]//中国航空结构动力学专业组第十六届学术交流会. 北京:中国航空工业动力学专业组, 2008. HUANG W C, QIN H M. The planning and problems of acoustic in Chinese commercial aircraft industry development[C]//The 16th China Aviation Structural Dynamics Conference. Beijing:Aviation Industry Corporation of China Dynamics Team, 2008 (in Chinese).
[3] [俄] A. Γ. 穆宁. 航空声学[M]. 曹传钧, 译. 北京:北京航空航天大学出版社, 1993. MU N A Γ. Aero acoustics[M]. CAO C J, translated. Beijing:Beihang University Press, 1993 (in Chinese).
[4] 宋文萍, 余雷, 韩忠华. 飞机机体气动噪声计算方法综述[J]. 航空工程进展, 2010(2):125-131. SONG W P, YU L, HANG Z H. Review of simulation method of aeroacoustic[J]. Advances in Aeronautical Science and Engineering, 2010(2):125-131 (in Chinese).
[5] DOBRZYNSKI W. Almost 40 years of airframe noise research:What did we achieve?[J]. Journal of Aircraft, 2010, 47(2):353-367.
[6] NISHIDA H, NONOMURA T, ABE T. Numerical study of three-dimensional effects of plasma structure on flow field around DBD plasma actuator:AIAA-2015-1733[R]. Reston:AIAA, 2015.
[7] 朱自强, 兰世隆. 民机机体噪声及其降噪研究[J]. 航空学报, 2015, 36(2):406-421. ZHU Z Q, LAN S L. Study of airframe noise and its reduction for commercial aircraft[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(2):406-421 (in Chinese).
[8] STALNOV O, WINDIATE S, ANGLAND D, et al. On the contribution of individual components to landing gear loads and noise:AIAA-2013-3153[R]. Reston:AIAA, 2013.
[9] XIAO Z, LIU J, LUO K Y, et al. Numerical investigations of massively separated flows past rudimentary landing gear using SST-DDES:AIAA-2012-0385[R]. Reston:AIAA, 2012.
[10] LAZOS B S. Mean flow features around the inline wheels of four-wheel landing gear[J]. AIAA Journal, 2002, 40(2):193-198.
[11] LOCKARD D P, KHORRAMI M R, LI F. Aeroacoustic analysis of a simplified landing gear:AIAA-2003-3111[R]. Reston:AIAA, 2003.
[12] SANDERS L, MANOHA E, BEN K S, et al. LAGOON:CFD/CAA coupling for landing gear noise and comparison with experimental database:AIAA-2011-2822[R]. Reston:AIAA, 2011.
[13] LI Y, SMITH M G, ZHANG X. Identification and attenuation of a tonal-noise source on an aircraft's landing gear[J]. Journal of Aircraft, 2010, 47(3):796-804.
[14] THOMAS V V, LOUIS J, PALFREYMAN D. Computational aeroacoustic analysis of a 1/4 scale G550 nose landing gear and comparison to NASA & UFL wind tunnel data:AIAA-2009-3359[R]. Reston:AIAA, 2009.
[15] GUO Y. Retracted:A component-based model for aircraft landing gear noise prediction[J]. Journal of Sound and Vibration, 2008, 312(4):801-820.
[16] DOBRZYNSKI W, CHOW L, SMITH M, et al. Experimental assessment of low noise landing gear component design[J]. International Journal of Aeroacoustics, 2010, 9(6):763-786.
[17] DOBRZYNSKI W, BUCHHOLZ H. Full-scale noise testing on Airbus landing gears in the German Dutch wind tunnel:AIAA-1997-1597[R]. Reston:AIAA, 1997.
[18] DOBRZYNSKI W, CHOW L, GUION P, et al. A European study on landing gear airframe noise sources:AIAA-2000-1971[R]. Reston:AIAA, 2000.
[19] DOBRZYNSKI W, CHOW L C, GUION P, et al. Research into landing gear airframe noise reduction:AIAA-2002-2409[R]. Reston:AIAA, 2002.
[20] DOBRZYNSKI W, SCHÖNING B, CHOW L C, et al. Design and testing of low noise landing gears[J]. International Journal of Aeroacoustics, 2006, 5(3):233-262.
[21] SMITH M G, FENECH B, CHOI C L, et al. Control of noise sources on aircraft landing gear bogies:AIAA-2006-2626[R]. Reston:AIAA, 2006.
[22] ELKOBY R, BRUSNIAK L, STOKER R, et al. Airframe noise results from the QTD Ⅱ flight test program:AIAA-2007-3457[R]. Reston:AIAA, 2007.
[23] CARUELLE B. LAGOON:An experimental database for the validation of CFD/CAA methods for landing gear noise prediction:AIAA-2008-2816[R]. Reston:AIAA, 2008.
[24] CASALINO D, RIBEIRO A F P, FARES E. Facing rim cavities fluctuation modes[J]. Journal of Sound and Vibration, 2014, 333(13):2812-2830.
[25] RIBEIRO A F, CASALINO D, FARES E, et al. CFD/CAA analysis of the LAGOON landing gear configuration:AIAA-2013-2256[R]. Reston:AIAA, 2013.
[26] PATRICIA J, BLOCK W, HELLER H. Measurements of farfield sound generation from a flow-excited cavity[J]. Comparative Biochemistry & Physiology Part C Toxicology & Pharmacology, 1975, 134(3):297-302.
[27] BLOCK P J W. Noise response of cavities of varying dimensions at subsonic speeds:NASA TN D-8351[R]. Washington,D.C.:NASA, 1976.
[28] 乔渭阳. 基于传声器阵列过顶测量结果的飞机起落架噪声研究[J]. 应用声学, 2001, 20(2):1-6. QIAO W Y. A study on landing gear noise based on fly-over measurements with a planar microphone array[J]. Applied Acoustics, 2001, 20(2):1-6 (in Chinese).
[29] 宁方立, 马尧, 王善景, 等. 飞机起落架气动噪声的数值计算方法[J]. 机械工程学报, 2013, 49(8):171-177. NING F L, MA Y, WANG S J, et al. Numerical computational method for predicting aircraft landing gear noise[J]. Journal of Mechanical Engineering, 2013, 49(8):171-177 (in Chinese).
[30] 龙双丽, 聂宏, 薛彩军, 等. 民用飞机起落架气动噪声数值仿真[J]. 南京航空航天大学学报, 2013, 44(6):786-791. LONG S L, NIE H, XUE C J, et al. Aerodynamic noise simulation of commercial aircraft landing gear[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2013, 44(6):786-791 (in Chinese).
[31] 胡宁, 郝璇, 苏诚, 等. 基于分离涡模拟的起落架气动噪声研究[J]. 空气动力学学报, 2015, 33(1):99-106. HU N, HAO X, SU C, et al. Aeroacoustic study of landing gear by detached eddy simulation[J]. Acta Aerodynamic Sinica, 2015, 33(1):99-106 (in Chinese).
[32] 薛彩军, 许远, 龙双丽,等. 某型飞机前起落架结构件气动噪声实验[J]. 空气动力学学报, 2012, 30(3):307-311. XU C J, XU Y, LONG S L, et al. Noise experiment of an aircraft's; landing gear structure[J]. Acta Aerodynamic Sinica, 2012, 30(3):307-311 (in Chinese).
[33] 刘兴强, 张洪涛, 黄文超,等. 某型飞机前起落架降噪实验[J]. 科学技术与工程, 2014, 14(11):72-75. LIU X Q, ZHANG H T, HUANG W C, et al, Noise reduction experiment of an aircraft nose landing gear[J]. Science Technology and Engineering, 2014, 14(11):72-75 (in Chinese).
[34] 陈涛, 侯宏, 陈志菲. ARJ客机进场飞行过程的起落架噪声的实验研究[J]. 振动与冲击, 2012, 31(10):83-86. CHEN T, HOU H, CHEN Z F. ARJ aircraft landing gear noise characteristics detected by fly-over measurements[J]. Journal of Vibration and Shock, 2012, 31(10):83-86 (in Chinese).
[35] 陈涛, 侯宏, 陈志菲, 等. ARJ21客机降落阶段起落架噪声实验研究[J]. 声学学报, 2013(5):615-623. CHEN T, HOU H, CHEN Z F, et al. Landing gear noise identification in the ARJ21 aircraft landing process[J]. Acta Acousitca, 2013(5):615-623 (in Chinese).
[36] 杨党国, 李建强, 范召林, 等. 高亚声速空腔绕流气动噪声特性研究[J]. 空气动力学学报, 2010, 28(6):703-707. YANG D G, LI J Q, FAN Z L, et al. Investigation on aerodynamic noise characteristics of cavity flow at high subsonic speeds[J]. Acta Aerodynamic Sinica, 2010, 28(6):703-707 (in Chinese).
[37] 赖焕新, 周邵萍, 苏永升, 等. 空腔流动的大涡模拟及气动噪声控制[J]. 工程热物理学报, 2008, 29(2):228-232. LAI H X, ZHOU S P, SU Y S, et al. Large-eddy simulation and controlling of noise in cavity[J]. Journal of Engineering Thermo Physics, 2008, 29(2):228-232 (in Chinese).
[38] CHONG T P, JOSEPH P F, DAVIES P. Design and performance of an open jet wind tunnel for aero-acoustic measurement[J]. Applied Acoustics, 2009, 70(4):605-614.
[39] MARSDEN O, BAILLY C, BOGEY C, et al. Investigation of flow features and acoustic radiation of a round cavity[J]. Journal of Sound and Vibration, 2012, 331(15):3521-3543.
[40] NOMURA Y, YAMAMURA I, INAWASHIRO S. On the acoustic radiation from a flanged circular pipe[J]. Journal of the Physical Society of Japan, 1960, 15(3):510-517.
[41] DYBENKO J, SAVORY E. An experimental investigation of turbulent boundary layer flow over surface-mounted circular cavities[J]. Proceedings of the Institution of Mechanical Engineers, Part G:Journal of Aerospace Engineering, 2008, 222(1):109-125.