ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Automatic extraction algorithm of parameterized streamlines from a radial-inflow turbomachinery ruled blade
Received date: 2016-07-07
Revised date: 2016-09-05
Online published: 2016-10-19
Supported by
National Natural Science Foundation of China (51205015)
A set of streamlines (SSL), as a significant geometric element in complex radial-inflow turbomachinery (RIT) with high precision, plays a vital role in modeling and aerodynamic optimization of RIT. Aimed at multidisciplinary design of RIT, we develop an integrated acquisition method oriented towards the profile and characteristics of RIT to obtain the surface information of RIT. An extraction method of the meridional section (MS) and straight generatrix vectors (SGVs) of the RIT with the ruled surface is proposed based on line geometry theory. The division algorithm of SGVs is anlayzed. A method for SSL fitting is presented to control both the smoothing and approximation degree of the blade surface. A parametric model of RIT is established by using SSL and MS as parameters to realize automatic extraction of SSL from arbitrary RIT prototype and automatic parametric modeling of the impeller. A case example is given to demonstrate the effectiveness of the proposed strategy.
ZHOU Yu , CHEN Silian , DU Farong , DING Shuiting . Automatic extraction algorithm of parameterized streamlines from a radial-inflow turbomachinery ruled blade[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2017 , 38(5) : 420592 -420592 . DOI: 10.7527/S1000-6893.2016.0250
[1] WALTHER B, NADARAJAH S. Optimum shape design for multirow turbomachinery configurations using a discrete adjoint approach and an efficient radial basis function deformation scheme for complex multiblock grids[J]. Journal of Turbomachinery,2015, 137(8):081006-1-081006-20.
[2] LIANG Q, WANG Y Z, FU H Y. Cutting path planning for ruled surface impellers[J]. Chinese Journal of Aeronautics, 2008, 21(5):462-471.
[3] LI M Y, LIU X L, JIA D K. Interpolation using non-uniform rational B-spline for the smooth milling of ruled-surface impeller blades[J]. Proceedings of the Institution of Mechanical Engineers, 2015, 229(7):1118-1130.
[4] XU C, AMANO R S. Meridional considerations of the centrifugal compressor development[J]. International Journal of Rotating Machinery, 2012, 2012(9):1-11.
[5] TEODOR M. Impeller design using CAD techniques and conformal mapping method[J]. Centrifugal Pumps, 2012, 24(2):33-64.
[6] KIM J H, CHOI J H, HUSAIN A. Multi-objective optimization of a centrifugal compressor impeller through evolutionary algorithms[J]. Journal of Power and Energy, 2010, 224(5):711-721.
[7] POTTMANN H, PETERNELL M, RAVANI B. An introduction to line geometry with applications[J].Computer-Aided Design, 1999, 31(1):3-16.
[8] POTTMANN H, WALLNER J. Computational line geometry[M]. 2001.
[9] 柯映林, 李岸. 基于主方向高斯映射的旋转面特征提取[J]. 浙江大学学报(工学版), 2006, 40(6):942-946. KE Y L, LI A. Rotational surface extraction based on principal direction Gaussian image from point cloud[J]. Journal of Zhejiang University (Engineering Science), 2006, 40(6):942-946 (in Chinese).
[10] ZHANG X M, ZHU L M, DING H. Kinematic generation of ruled surface based on rational motion of point-line[J]. Science China, 2012, 55(1):62-71.
[11] CHAILIE C W, ELBER G. Multi-dimensional dynamic programming in ruled surface fitting[J]. Computer-Aided Design, 2014, 51(6):39-49.
[12] PEREZ-ARRIBAS F, TREJO-VARGAS I. Computer-aided design of horizontal axis turbine blades[J]. Renewable Energy, 2012, 44(8):252-260.
[13] BI Q Z, ZHU L M, WANG Y H. Analytical envelope surface representation of a conical cutter undergoing rational motion[J]. International Journal of Advanced Manufacturing, 2010, 47(5):719-730.
[14] LIN K Y, HUANG C Y, LAI J Y, et al. Automatic reconstruction of B-spline surfaces with constrained boundaries[J]. Computers & Industrial Engineering, 2012, 62(1):226-244.
[15] XIE W C, ZOU X F, YANG J D, et al. Iteration and optimization scheme for the reconstruction of 3D surfaces based on non-uniform rational B-splines[J]. Computer-Aided Design, 2012, 44(11):1127-1140.
[16] AKEMI G, ANDRÉS I. Particle swarm optimization for non-uniform rational B-spline surface reconstruction from clouds of 3D data points[J]. Information Sciences, 2012, 192(6):174-192.
[17] ALAN C L, CHANG H C. Automatic 3D measuring system for optical scanning of axial fan blades[J]. International Journal of Advanced Manufacturing, 2011, 57(4):701-717.
[18] LU D J, LⅡ K S, WANG Y. The formulae and algorithms for Lagrange-power basis transformation and Lagrange-Newton transformation[J]. Applied Mathematics and Computation, 2015, 32(5):1-20.
[19] LAURENT B, MOHAMED E, ANDRE G. A computa tional study of ruled surfaces[J]. Journal of Symbolic Computation, 2009, 44(3):232-241.
[20] ARANDIGA F, NOGUERA J J. Reconstructions that combine interpolation with least squares fitting[J]. Applied Numerical Mathematics, 2015, 97(11):30-41.
[21] DARIO A, BINI A M. Computing curve intersection by means of simultaneous iterations[J]. Numerical Algorithms, 2006, 43(2):151-175.
[22] WANG M H, YUE S. Error prediction and compensa-tion based on interference-free tool paths in blade milling[J]. International Journal of Advanced Manufacturing, 2014, 71(5):1309-1318.
[23] ZHOU X, ZHANG Y X, JI Z L. The optimal hydraulic design of centrifugal impeller using genetic algorithm with BVF[J]. International Journal of Rotating Machinery, 2014:845302.
/
| 〈 |
|
〉 |
CJA