ACTA AERONAUTICAET ASTRONAUTICA SINICA >
A static calibration method of wind tunnel strain-gage balance based on Kriging model
Received date: 2016-01-15
Revised date: 2016-03-09
Online published: 2016-03-18
Supported by
National Natural Science Foundation of China (11372337)
A new static calibration method for strain-gage balance used in wind tunnel test is introduced here. A design of experiments (DOE) method, Latin hypercube design, is used to choose samples. Kriging surrogate models constructed by using first order regression base function and EXP correlation function are mathematical models which predict loads by taking measured voltage increments and other factors as parameters, and six-component combining load calibration technique is used too. Compared with the traditional one factor at a time (OFAT) method, the new method not only has equivalent accuracy, but also remarkably reduces the number of samples. The new method is used in the calibration of some balance which is used to measure the thrust of a vector nozzle, and predicted thrust forces well. It figures out the interference of gas inflow which is hardly handled by traditional calibration method.
Key words： Kriging model; design of experiments; strain-gage balance; calibration; wind tunnel
LIU Zhiyong, MIAO Lei, TAO Yang, ZHANG Yi, WANG Shumin. A static calibration method of wind tunnel strain-gage balance based on Kriging model[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016, 37(12): 3685-3691. DOI: 10.7527/S1000-6893.2016.0069
[1] 王发祥. 高速风洞试验[M]. 北京:国防工业出版社, 2003. WANG F X. High speed wind tunnel test[M]. Beijing:National Defense Industry Press, 2003(in Chinese).
[2] PARKER P A. A single-vector force calibration method featuring the modern design of experiments:AIAA-2001-0170[R]. Reston:AIAA, 2001.
[3] DELOACH R, PHILIPSEN I. Stepwise regression analysis of MDOE balance calibration data acquired at DNW[C]//45th AIAA Aerospace Sciences Meeting and Exhibit. Reston:AIAA, 2007.
[4] ULBRICH N, VOLDEN T. A new approach to strain-gage balance calibration analysis[C]//5th International Symposium on Strain-Gauge Balances, 2006.
[5] DELOACH R. Applications of modern experiment design to wind tunnel testing at NASA Langley Research Center[C]//36th AIAA Aerospace Sciences Meeting and Exhibit. Reston:AIAA,1998.
[6] BERGMANN R. An experimental comparison of different load tables for balance calibration:AIAA-2010-4544[R]. Reston:AIAA, 2010.
[7] HUFNAGEL K. The 2nd generation balance calibration machine of Darmstadt University of Technology:AIAA-2007-0148[R]. Reston:AIAA, 2007.
[8] ULBRICH N. Combined load diagram for a wind tunnel strain-gage balance:AIAA-2010-4203[R]. Reston:AIAA, 2010.
[9] KEITH C L, SEAN A C, THOMAS H J, et al. Thermal and pressure characterization of a wind tunnel force balance using the single vector system[C]//49th AIAA Aerospace Sciences Meeting. Reston:AIAA,2011.
[10] ULBRICH N. Iterative strain-gage balance calibration data analysis for extended independent variable sets:AIAA-2011-0011[R]. Reston:AIAA, 2011.
[11] LANDMAN D, YODER D. Wind-tunnel balance calibration with temperature using design of experiments[J]. Journal of Aircraft, 2014, 51(3):841-848.
[12] ULBRICH N, VOLDEN T. Development of a new software tool for balance calibration:AIAA-2006-3434[R]. Reston:AIAA, 2006.
[13] 湛华海, 张旭, 吕治国, 等. 一种单矢量风洞天平校准系统设计[J]. 实验流体力学, 2014, 28(1):70-74. ZHAN H H, ZHANG X, LU Z G, et al. Design of single vector wind tunnel balance calibration system[J]. Journal of Experiments in Fluid Mechanics, 2014, 28(1):70-74(in Chinese).
[14] 罗华云, 赖传兴, 王月贵, 等. 喷管模型试验器六分量天平校准技术[J]. 航空动力学报, 2013, 28(1):67-73. LUO H Y, LAI C X, WANG Y G, et al. Six-component balance calibration technology for nozzle model testing facility[J]. Journal of Aerospace Power, 2013, 28(1):67-73(in Chinese).
[15] 王晓锋, 席光, 王尚锦. Kriging与响应面方法在气动优化设计中的应用[J]. 工程热物理学报, 2005, 26(3):423-425. WANG X F, XI G, WANG S J. Application of Kriging and response surface method in aerodynamics optimization design[J]. Journal of Engineering Thermophysics, 2005, 26(3):423-425(in Chinese).
[16] SACKS J, WELCH W J, MITCHELL T J, et al. Design and analysis of computer experiments[J]. Statistical Science, 1989, 4(4):409-435.
[17] NOEL C. Spatial prediction and ordinary Kriging[J]. Mathematical Geology, 1988, 20(4):405-421.
[18] 邹林君. 基于Kriging模型的全局优化方法研究[D]. 武汉:华中科技大学, 2011. ZOU L J. Research on global optimization algorithm based on Kriging model[D]. Wuhan:Huazhong University of Science and Technology, 2011(in Chinese).
[19] TIMOTHY W S, JANET K A, FARROKH M. Spatial correlation metamodels for global approximation in structural design optimization[C]//Proceedings of ASME Design Engineering Technical Conference, 1998:1-12.
[20] ART B O. Orthogonal arrays for computer experiments, integration and visualization[J]. Statistical Science, 1992, 2(2):439-452.
[21] VIANA F A C. Surrogates toolbox user's guide[M]. (2010)[2016-01-15]. http://sites.google.com/site/fchegury.
/
| 〈 |
|
〉 |
CJA