ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Optimization method of carrying project for repairable spares with scrap under multi-constraints
Received date: 2015-10-29
Revised date: 2015-11-19
Online published: 2016-01-18
Supported by
National Defense Pre-research Foundation of China (51304010206, 51327020105)
For the widely existed problem of the scrap for fault parts and spares carrying under multi-constraints during the mission, approximation method of availability evaluation and spares optimization for multi-indenture equipment are proposed. First, repairable spares with scrap which contain multi-indenture are converted to non-repairable spares which only contain single-indenture by omitting the maintenance time. Then, evaluation model of availability is obtained based on the additive property of Gamma distribution. Afterwards, the optimization model of spares is built with the lowest volume under constraints of availability and mass. Lagrange factors to which dynamic adjustment is made by marginal algorithm are introduced during the model solving. In actual example compared with simulation results, the approximation method is reasonable and feasible when maintenance time is less than half of the equivalent average life, which makes the average error less than 5%.
LIU Renyang , LI Qingmin , LI Hua , XIONG Hongjin . Optimization method of carrying project for repairable spares with scrap under multi-constraints[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016 , 37(10) : 3131 -3139 . DOI: 10.7527/S1000-6893.2016.0018
[1] BACHMAN T C, KLINE R C. Model for estimating spare parts requireents for future missions:AIAA-2004-5978[R].Reston:AIAA, 2004.
[2] ROBERT C K, TOVEY C. Estimating spare parts requirements with commonality and redundancy:AIAA-2006-7233[R]. Reston:AIAA, 2006.
[3] ROBERT C K, TOVEY C. Estimating spare parts requirements with commonality and redundancy[J]. Journal of Spacecraft and Rockets, 2007, 44(4):977-984.
[4] 卫忠, 徐晓飞, 战德臣, 等. 协同供应链多级库存控制的多目标优化模型及其求解方法[J]. 自动化学报, 2007, 33(2):181-187. WEI Z, XU X F, ZHAN D C, et al. Multi objective optimization model for collaborative multi-echelon inventory control in supply chain[J]. Acta Automatica Sinica, 2007, 33(2):181-187(in Chinese).
[5] LI Y, YANG B, HU H J. A simulation-optimization approach to spare parts allocation based on decision-maker's satisfaction[C]//Proceedings of International Conference on Reliability Maintainability and Safety, 2009:576-581.
[6] IMAN N, SEYED R H. A multi-objective approach to simultaneous determination of spare part numbers and preventive replacement times[J]. Applied Mathematical Modeling, 2011, 35:1157-1166.
[7] 王乃超, 康锐. 多约束条件下备件库存优化模型及分解算法[J]. 兵工学报, 2009, 30(2):247-251. WANG N C, KANG R. An optimization model for inventory spares under multi-constraints and its decomposition algorithm[J]. Acta Armamentarii, 2009, 30(2):247-251(in Chinese).
[8] 阮旻智, 李庆民, 张光宇, 等. 多约束下舰船装备携行备件保障方案优化研究[J]. 兵工学报, 2013, 34(9):1144-1149. RUAN M Z, LI Q M, ZHANG G Y, et al. Optimization method of carrying spare parts support project for warship equipment under multi-constrants[J]. Acta Armamentarii, 2013, 34(9):1144-1149(in Chinese).
[9] RUAN M Z, LUO Y, LI H. Configuration model of partial repairable spares under batching ordering policy on inventory state[J]. Chinese Journal of Aeronautics, 2014, 27(3):558-567.
[10] FRANCESCO C, GIULIO D G, MASSIMO T. Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints[J]. Reliability Engineering and System Safety, 2013, 119:95-101.
[11] 甘茂治, 康建设, 高崎. 军用装备维修工程学[M].第2版. 北京:国防工业出版社, 2010:42-46. GAN M Z, KANG J S, GAO Q. Military equipment maintenance engineering[M].2nd ed. Beijing:National Defense Industry Press, 2010:42-46(in Chinese).
[12] 中国人民解放军总装备部. GJB4355-2002备件供应规划要求[S]. 北京:中国人民解放军总装备部, 2003:21-22. The PLA General Armament Department. GJB4355-2002 Spares provisioning requirements[S]. Beijing:The PLA General Armament Department, 2003:21-22(in Chinese).
[13] SHERBROOKE C C. VARI-METRIC:Improved approximations for multi-indenture multi-echelon availability models[J]. Operations Research, 1986,34:311-319.
[14] SHERBROOKE C C. Optimal inventory modeling of system:Multi-Echelon techniques[M]. 2nd ed. Boston:Artech House, 2004:29-31.
[15] 王慎. 装备使用阶段备件保障策略优化及仿真建模方法研究[D]. 武汉:海军工程大学, 2014:30-31. WANG S. Research on optimization and simulation modeling method for support policies of spare parts in operational phase of equipments[D]. Wuhan:Naval University of Engineering, 2014:30-31(in Chinese).
[16] 刘任洋, 李庆民, 李华. 基于横向转运策略的可修件三级库存优化模型[J]. 航空学报, 2014, 35(12):3341-3349. LIU R Y, LI Q M, LI H. Optimal model of three-echelon inventory for repairable spare parts with lateral transshipments[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(12):3341-3349(in Chinese).
/
| 〈 |
|
〉 |
CJA