ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Series of material property indices and their application to materials selection for aircraft structure
Received date: 2015-10-12
Revised date: 2015-10-23
Online published: 2015-10-30
Supported by
National Natural Science Foundation of China (51475470, 51201182)
In order to improve the rationality of materials selection for aircraft structure, considering from the viewpoint of material property indices, concepts and calculation methods of specific fatigue strength, specific static toughness, specific dynamic toughness, fatigue static strength ratio, toughness static strength ratio and toughness fatigue strength ratio are put forward apart from the common parameters of the specific static strength and the specific stiffness. A materials selection method based on the series of material property indices is established. This method firstly narrows the possible materials usable in design by considering the design criteria and actual in-service requirements, then ranks the candidates according to the series of material property indices and chooses the final material through structural validation. Finally, a material selection process for an aircraft wing spar is given as an example.
ZHANG Teng , HE Yuting , TAN Shen'gang , WANG Xinbo , ZHANG Sheng . Series of material property indices and their application to materials selection for aircraft structure[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016 , 37(10) : 3170 -3177 . DOI: 10.7527/S1000-6893.2015.0291
[1] SAPUAN S M. A knowledge-based system for materials selection in mechanical engineering design[J]. Materials and Design, 2001, 22(8):687-695.
[2] MANSHADI B D, MAHMUDI H, ABEDIAN A, et al. A novel method for materials selection in mechanical design:Combination of non-linear normalization and a modified digital logic method[J]. Materials and Design, 2007, 28(1):8-15.
[3] JAHAN A, ISMAIL M Y, MUSTAPHA F, et al. Material selection based on ordinal data[J]. Materials and Design, 2010, 31(7):3180-3187.
[4] CHATTERJEE P, ATHAWALE V M, CHAKRABORTY S. Materials selection using complex proportional assessment and evaluation of mixed data methods[J]. Materials and Design, 2011, 32(2):851-860.
[5] CHATTERJEE P, CHAKRABORTY S. Materials selection using preferential ranking methods[J]. Materials and Design, 2012, 35(3):384-393.
[6] JAHAN A, EDWARDS K L. A state-of-the-art survey on the influence of normalization techniques in ranking:Improving the materials selection process in engineering design[J]. Materials and Design, 2015, 65(1):335-342.
[7] KESTEREN I E H. Product designers' information needs in materials selection[J]. Materials and Design, 2008, 29(1):133-145.
[8] MIZUND D, SUZUKI S, FUJITA S, et al. Corrosion monitoring and materials selection for automotive environments by using Atmospheric Corrosion Monitor (ACM) sensor[J]. Corrosion Science, 2014, 83(6):217-225.
[9] COOPER D, DAVIS F A, WOOD R J K. Selection of wear resistant materials for the petrochemical industry[J]. Journal of Physics D-Applied Physics, 1992, 25(1):195-204.
[10] TAWANCY H M, UI-HAMID A, MOHAMMED A, et al. Effect of materials selection and design on the performance of an engineering product-An example from petrochemical industry[J]. Materials and Design, 2007, 28(2):686-703.
[11] CHERNOBAEVA A, SHTEROMBAH J, KRJUKOV A, et al. Material characterisation and selection for the international research project "primavera"[J]. International Journal of Pressure Vessels and Piping, 2007, 84(3):151-158.
[12] ASAYAMA T, KAWASAKI N, MORISHITA M, et al. Balancing material selection and inspection requirements in structural design of fast breeder reactors based on "system based code" concept[J]. Nuclear Engineering and Design, 2008, 238(2):417-422.
[13] LIN H, FREEMAN B D. Materials selection guidelines for membranes that remove CO2 from gas mixtures[J]. Journal of Molecular Structure, 2005, 739(4):57-74.
[14] HUDA Z, EDI P. Materials selection in design of structures and engines of supersonic aircrafts:A review[J]. Materials and Design, 2013, 46(4):552-560.
[15] 吴云书. 材料的比强度和比刚度[J]. 宇航学报, 1985, 6(3):80-85. WU Y S. The specific strength and specific stiffness of materials[J]. Journal of Astronautics, 1985, 6(3):80-85(in Chinese).
[16] 周铁城. 机械设计选材与强度刚度评估[J]. 机械工程材料, 1996, 20(4):40-42. ZHOU T C. A choice of material and prediction of its strength and stiffness in machine design[J]. Materials for Mechanical Engineering, 1996, 20(4):40-42(in Chinese).
[17] 何宇廷, 张腾, 高潮, 等. 飞机结构寿命控制技术浅析[C]//第十七届全国疲劳与断裂学术会议论文集. 桂林:中国腐蚀与防护学会, 2014:227. HE Y T, ZHANG T, GAO C, et al. A brief analysis of aircraft structural life control technology[C]//17th National Symposium of Fatigue and Fracture. Guilin:Chinese Society for Corrosion and Protection, 2014:227(in Chinese).
/
| 〈 |
|
〉 |
CJA