ZHANG Qi , SUN Lulu , PANG Shujie , ZHANG Tao . Surface Vitrification of a Corrosion-resistant Fe-Cr-Mo-C-B Alloy by Laser Surface Treatment and Its Effect on Microstructure and Properties[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014 , 35(10) : 2881 -2888 . DOI: 10.7527/S1000-6893.2014.0142

[1] Inoue A, Takeuchi A.Recent development and application products of bulk glassy alloys[J].Acta Materialia, 2011, 59(6):2243-2267.
[2] Greer A L.Metallic glasses[J].Science, 1995, 267(5206):1947-1953.
[3] Wang W H, Dong C, Shek C H.Bulk metallic glasses[J].Materials Science and Engineering:R:Reports, 2004, 44(2):45-89.
[4] Suryanarayana C, Inoue A.Bulk metallic glasses[M].Florida:CRC Press, 2011:307-329.
[5] Hashimoto K.What we have learned from studies on chemical properties of amorphous alloys[J].Applied Surface Science, 2011, 257(19):8141-8150.
[6] Pang S J, Zhang T, Kimura H, et al.Corrosion behavior of Zr-(Nb-)Al-Ni-Cu glassy alloys[J].Materials Transactions, JIM, 2000, 41(11):1490-1494.
[7] Pang S J, Zhang T, Asami K, et al.Synthesis of Fe-Cr-Mo-C-B-P bulk metallic glasses with high corro-sion resistance[J].Acta Materilia, 2002, 50(3):489-497.
[8] Pang S J, Zhang T, Asami K,et al.New Fe-Cr-Mo-(Nb, Ta)-C-B glassy alloys with high glass-forming ability and good corrosion resistance[J].Materials Transactions, JIM, 2001, 42(2):376-379.
[9] Pang S J, Zhang T, Asami K, et al.Bulk glassy Fe-Cr-Mo-C-B alloys with high corrosion resistance[J].Corrosion Science, 2002, 44(8):1847-1856.
[10] Pang S J, Zhang T, Asami K, et al.Effects of chromium on the glass formation and corrosion behavior of bulk glassy Fe-Cr-Mo-C-B alloys[J].Materials Transactions, JIM, 2002, 43(8):2137-2142.
[11] Pang S J, Zhang T, Asami K, et al.Formation of bilk glassy Fe_75-x-yCr_xMo_yC₁₅B₁₀ alloys and their corrosion behavior[J].Journal of Materials Research, 2002, 17(3):701-704.
[12] Jayaraj J, Kim Y C, Kim K B, et al.Corrosion behaviors of Fe_45-xCr₁₈Mo₁₄C₁₅B₆Y₂M_x(M=Al, Co, Ni, N and x=0,2) bulk metallic glasses under conditions simulating fuel cell environment[J].Journal of Alloys and Compounds, 2007, 434:237-239.
[13] Duarte M J, Klemm J, Klemm S O, et al.Element-resolved corrosion analysis of stainless-type glass-forming steels[J].Science, 2013, 341(6144):372-376.
[14] Pang S J, Zhang T, Asami K, et al.Formation of bulk glassy Ni-(Co-)Nb-Ti-Zr alloys with high corrosion resistance[J].Materials Transactions, JIM, 2002, 43(7):1771-1773.
[15] Zhang T, Pang S J, Asami K, et al.Glassy Ni-Ta-Ti-Zr(-Co) alloys with high thermal stability and high corrosion resistance[J].Materials Transactions, JIM, 2003, 44(11):2322-2325.
[16] Pang S J, Zhang T, Kimura H, et al.Corrosion behavior of glassy Ni₅₅Co₅Nb₂₀Ti₁₀Zr₁₀ alloy in 1 N HCl solution studied by potentiostatic polarization and XPS[J].Corrosion Science, 2006, 48(3):625-633.
[17] Pang S J, Shek C H, Asami K, et al.Formation and corrosion behavior of glassy Ni-Nb-Ti-Zr-Co(-Cu) alloys[J].Journal of Alloys and Compounds, 2007, 434:240-243.
[18] Qin C L, Asami K, Kimura H, et al.Surface characteristics of high corrosion resistant Ni-Nb-Zr-Ti-Ta glassy alloys for nuclear fuel reprocessing applications[J].Electrochemistry Communications, 2008, 10(9):1408-1410.
[19] Pang S J, Zhang T, Asami K, et al.Formation, corrosion behavior, and mechanical properties of bulk glassy Zr-Al-Co-Nb alloys[J].Journal of Materials Research, 2003, 18(7):1652-1658.
[20] Morrison M L, Buchanan R A, Leon R V, et al.The electrochemical evaluation of a Zr-based bulk metallic glass in a phosphate-buffered saline electrolyte[J].Journal of Biomedical Materials Research Part A, 2005, 74(3): 430-438.
[21] Pang S J, Men H, Shek C H, et al.Formation, thermal stability and corrosion behavior of glassy Ti₄₅Zr₅Cu₄₅Ni₅alloy[J].Intermetallics, 2007, 15(5):683-686.
[22] Morrison M L, Buchanan R A, Peker A, et al.Electrochemical behavior of a Ti-based bulk metallic glass[J].Journal of Non-Crystalline Solids, 2007, 353(22):2115-2124.
[23] Pang S J, Shek C H, Ma C L, et al.Corrosion behavior of a glassy Ti-Zr-Hf-Cu-Ni-Si alloy[J].Materials Science and Engineering:A, 2007, 449:557-560.
[24] Asami K, Sato T, Hashimoto K.Surface vitrification of Fe-based alloys by laser treatment[J].Journal of Non-Crystalline Solids, 1984, 68(2):261-269.
[25] Kumagai N, Asami K, Hashimoto K.Preparation of amorphous palladium-base surface alloys on conventional crystalline metals by laser treatment[J].Journal of Non-Crystalline Solids, 1986, 87(1):123-126.
[26] Yang Y, Hu J D, Wang H Y, et al.Ni-P amorphous phases obtained by Nd-YAG pulsed laser alloying of deposited Ni-P coating with aluminum[J].Materials Letters, 2006, 60(9):1128-1130.
[27] Audebert F, Colaco R, Vilar R, et al.Production of glassy metallic layers by laser surface treatment[J].Scripta Materialia, 2003, 48(3):281-286.
[28] Matthews D T A, Ocelik V, de Hosson J T M.Tribological and mechanical properties of high power laser surface-treated metallic glasses[J].Materials Science and Engineering:A, 2007, 471(1):155-164.
[29] Suryanarayana C, Inoue A.Iron-based bulk metallic glasses[J].International Materials Reviews, 2013, 58(3):131-166.
[30] Chen B Q, Li Y, Li R, et al.Influence of laser surface melting on glass formation and tribological behaviors of Zr₅₅Al₁₀Ni₅Cu₃₀ alloy[J].Journal of Materials Research, 2011, 26(20):2642-2652.
[31] Chen B Q, Li Y, Cai Y, et al.Surface vitrification of alloys by laser surface treatment[J].Journal of Alloys and Compounds, 2012, 511:215-220.
[32] Chen B Q, Li Y, Yi M, et al.Optimization of mechanical properties of bulk metallic glasses by residual stress adjustment using laser surface melting[J].Scripta Materialia, 2012, 66(12):1057-1060.
[33] Ponnambalam V, Poon S J, Shiflet G J.Fe-based bulk metallic glasses with diameter thickness larger than one centimeter[J].Journal of Materials Research, 2004, 19(5):1320-1323.
[34] Maddala D R, Rainer J.Sliding wear behavior of Fe_50-xCr₁₅Mo₁₄C₁₅B₆Er_x(x=0, 1, 2at%) bulk metallic glass[J].Wear, 2012, 294:246-256.
[35] Katakam S, Santhanakrishnan S, Dahotre N B.Fe-based amorphous coatings on AISI 4130 structural steel for corrosion resistance[J].JOM, 2012, 64(6):709-715.