ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Through-flow Simulation Method and Wind Tunnel Validation Technique for Hypersonic Vehicle
Received date: 2013-12-08
Revised date: 2014-06-15
Online published: 2014-06-20
Supported by
National Natural Science Foundation of China (91216203)
The wind tunnel validation tests for the reduced model of hypersonic vehicle are presented in this paper, by comprehensively utilizing wind tunnel force measurement, pressure measurement and fluctuating pressure measurement and analysis technique. The through-flow status and aerodynamic characteristics of the model at different inlet throat heights, and Reynolds numbers' effects on aerodynamic characteristics of the model in the given inlet throat height are studied by wind tunnel validation tests for the axisymmetric configuration model and lifting-body configuration model. The results show that the validation tests can effectively carry out through-flow conditions of inlet in different working statuses by means of wind tunnel simulation, and the purposes of studying aerodynamic characteristics of the model and optimizing the design of inlet are achieved. Furthermore, Reynolds numbers' effects on through-flow characteristics of the lifting-body configuration model are very slight, which can provide some foundation for actual flight condition simulation. The interrelated data processing and analysis methods can be used in the similar condition of the model designs of wind tunnel test.
ZHAO Zhongliang , YANG Xiaojuan , JIANG Weimin , CHEN Jianzhong , WANG Junlan . Through-flow Simulation Method and Wind Tunnel Validation Technique for Hypersonic Vehicle[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014 , 35(11) : 2932 -2938 . DOI: 10.7527/S1000-6893.2014.0122
[1] Woods W C, Holland S D, DiFulvio M. Hyper-X stage separation wind tunnel test program, AIAA-2000-4008[R].Reston: AIAA, 2000.
[2] Joycep J, Pomroy J B, Grindle L. The Hyper-X launch vehicle: challenges and design considerations for hypersonic flight testing, AIAA-2005-3333[R]. Reston: AIAA, 2005.
[3] Peebles C. Learning from experience: case studies of the Hyper-X project, AIAA-2009-1523[R]. Reston: AIAA, 2009.
[4] Hank J M, Murphy J. The X-51A scramjet engine flight demonstration program, AIAA-2008-2540[R]. Reston: AIAA, 2008.
[5] Marshall L A, Corpening G P, Sherrill R. A chief engineer's view of the NASA X-43A scramjet flight test, AIAA-2005-3332[R]. Reston: AIAA, 2005.
[6] Bermudez L M, Gladden R D, Jeffries M S, et al. Aerodynamic characterization of the Hyper-X launch vehicle, AIAA-2003-7074 [R]. Reston: AIAA, 2003.
[7] Wang W X, Guo R W. Study of flow characteristics of hypersonic inlet based on boundary layer transition[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(10): 1772-1780. (in Chinese). 王卫星, 郭荣伟. 基于边界层转捩的高超声速进气道特性研究[J]. 航空学报,2012, 33(10): 1772-1780.
[8] Liu Z X, Xiao H. Numerical simulation, experiment and optimization of hypersonic vehicle configuration[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(3): 411-421. (in Chinese). 刘振侠, 肖洪. 高超声速飞行器构型的数值模拟、试验研究与优化设计[J]. 航空学报, 2009, 30(3): 411-421.
[9] Tang W, Zeng L, Feng Y, et al. Aerodynamic configuration conceptional design for high maneuverable lift body with flaps[J]. Acta Aerodynamica Sinica, 2011, 29(3): 370-373. (in Chinese) 唐伟, 曾磊, 冯毅, 等. 升力体机动飞行器气动布局概念设计[J]. 空气动力学学报, 2011, 29(3): 370-373.
[10] Che J, Tang S, He K F. Research on aerodynamic configuration optimization of integral performance for hypersonic cruise vehicle[J]. Acta Aerodynamica Sinica, 2009, 27(2): 214-219. (in Chinese) 车竞, 唐硕, 何开锋. 高超声速飞行器气动布局总体性能优化设计研究[J]. 空气动力学学报,2009, 27(2): 214-219.
[11] Chen Y S, Guo H L, Zhong S. Research advances on several problems of hypersonic space vehicle[J]. Winged Missile Journal, 2009(8): 26-33. (in Chinese) 陈予恕, 郭虎伦, 钟顺. 高超声速飞行器若干问题研究进展[J]. 飞航导弹, 2009(8): 26-33.
[12] Zhang H Y, Cheng K M, Wu Y Z. Experimental study of flow characteristics and the influence for a hypersonic flight vehicle[J]. Acta Aerodynamica Sinica, 2009, 27(2): 193-198. (in Chinese) 张红英, 程克明, 伍贻兆. 高超声速飞行器内流道流态及其对全机气动力影响的实验研究[J]. 空气动力学学报,2009, 27(2): 193-198.
[13] Fang Q, Chen J Z, Ma H. A more precise dynamic model for AHFV(air-breathing hypersonic flight vehicle) [J]. Journal of Northwestern Polytechnical University, 2010, 28(2): 160-164. (in Chinese) 方群, 陈记争, 马辉. 吸气式高超声速飞行器动力学建模与分析[J]. 西北工业大学学报, 2010, 28(2): 160-164.
[14] Nan X J, Zhang K Y, Jin Z G. Integrated design of waverider forebody and lateral hypersonic inward turning inlets[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(8): 1417-1426. (in Chinese) 南向军, 张堃元, 金志光. 乘波前体两侧高超声速内收缩进气道一体化设计[J]. 航空学报,2012,33(8): 1417-1426.
[15] Yuan H C, Guo R W. Investigation of an experiment project of hypersonic inlet with different forebody widths[J]. Acta Aeronautica et Astronautica Sinica, 2012, 33(4): 617-624. (in Chinese) 袁化成, 郭荣伟. 一种前体加宽型高超声速进气道试验方案研究[J]. 航空学报, 2012, 33(4): 617-624.
[16] Xie L R, Guo R W. Numerical simulation and experimental validation of flow in mixed compression axisymmetric supersonic inlet with fixed geometry[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(1): 78-83. (in Chinese) 谢旅荣, 郭荣伟. 定几何混压式轴对称超声速进气道气动特性数值仿真和实验验证[J]. 航空学报, 2007, 28(1): 78-83.
/
| 〈 |
|
〉 |
CJA