ACTA AERONAUTICAET ASTRONAUTICA SINICA >
An Optimization Approach for Mass Reduction and Noise Dampening of Aircraft Closed Chamber
Received date: 2013-12-30
Revised date: 2014-05-19
Online published: 2014-06-06
Supported by
National Natural Science Foundation of China (11002013, 11372025); National Defense Basic Research Program (B2120110011); "111" Project (B07009)
Noise level is an important index in closed chamber's design of modern aircraft; by using stiffeners traditional design can reduce noise effectively but results in much heavier structures. Thus, an optimization approach of the structural-acoustic coupling system composed of an aircraft equipment bay is studied aimed at mass reduction under noise constraint. A structural-acoustic coupling finite element model is created; by using the finite element software ACTRAN, the acoustic field in the equipment bay can be calculated, which is then verified and amended by experiments. To reduce structure mass of the equipment bay, the cabin door panel is divided into several areas with internal stiffeners as their boundaries. By conducting the optimization of stiffener sections and the thickness of each area, the total mass of the structure drops substantially. Accordingly, the dynamic stiffness of the structure is better distributed, which reduces the acoustic radiation energy and ultimately reduces the noise within the closed chamber. The work of this paper has important guiding significance in practical engineering, especially in similar structural-acoustic coupling system enclosed by thin plate with stiffeners.
YANG Juntan , LI Yunlong , WANG Xiaojun , QIU Zhiping . An Optimization Approach for Mass Reduction and Noise Dampening of Aircraft Closed Chamber[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014 , 35(9) : 2491 -2499 . DOI: 10.7527/S1000-6893.2014.0103
[1] Li Y, Wang X, Zhang D. Control strategies for aircraft airframe noise reduction[J]. Chinese Journal of Aeronautics, 2013, 26(2): 249-260.
[2] Wu J H, Chen H L. A method to predict acoustic radiation from an enclosed multicavity structure[J]. Journal of Sound and Vibration, 2002, 249(3): 417-427.
[3] Nefske D J, Wolf J A, Jr, Howell L J. Structural-acoustic finite element analysis of the automobile passenger compartment: a review of current practice[J]. Journal of Sound and Vibration, 1982, 80(2): 247-266.
[4] Ying H Q. Modern vibration and noise technology:Vol. 8[M]. Beijing: Aviation Industry Press, 2012: 227-232. (in Chinese) 应怀樵. 现代振动与噪声技术: 第8卷[M]. 北京: 航空工业出版社, 2012: 227-232.
[5] Le Moyne S, Tebec J L, Tawfiq I. Acoustical influence of stiffeners on acoustic radiation of plates[J]. Mechanical Systems and Signal Processing, 2005, 19(1): 195-212.
[6] Zhu D C, Xing Y F, Cheng W, et al. Engineering vibration[M]. Beijing: Beihang University Press, 2004: 3-36. (in Chinese) 诸德超, 邢誉峰, 程伟, 等. 工程振动基础[M]. 北京: 北京航空航天大学出版社, 2004: 3-36.
[7] Luo J, Gea H C. Optimal stiffener design for interior sound reduction using a topology optimization based approach[J]. Journal of Vibration and Acoustics, 2003, 125(3): 267-273.
[8] Lamancusa J S. Geometric optimization of internal combustion engine induction systems for minimum noise transmission[J]. Journal of Sound and Vibration, 1988, 127(2): 303-318.
[9] Zhang J, Zhao W Z, Zhang W Y. Optimum weight design of plate with acoustic pressure restrict for coupled acoustic-structure systems[J]. Chinese Journal of Applied Mechanics, 2006, 23(4): 568-571. (in Chinese) 张军, 兆文忠, 张维英. 声场-结构耦合系统声压约束下板重量优化设计研究[J]. 应用力学学报, 2006, 23(4): 568-571.
[10] Zhang J. Research on acoustic-structure sensitivity and structure-acoustic optimization design. Dalian: Dalian Jiaotong University, 2006. (in Chinese) 张军. 声学-结构灵敏度及结构-声学优化设计研究. 大连: 大连交通大学, 2006.
[11] Tinnsten M. Optimization of acoustic response—a numerical and experimental comparison[J]. Structural and Multidisciplinary Optimization, 2000, 19(2): 122-129.
[12] Marburg S, Beer H J, Gier J, et al. Experimental verification of structural-acoustic modelling and design optimization[J]. Journal of Sound and Vibration, 2002, 252(4): 591-615.
[13] Jha S K, Prode T. Origin of low frequency noise in motor cars[C]//Proceedings of the 14th FISITA Conference, 1972: 46-55
[14] Krog L, Tucker A, Kemp M, et al. Topology optimization of aircraft wing box ribs[C]//10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 2004: 1-11.
[15] Lamancusa J S. Numerical optimization techniques for structural-acoustic design of rectangular panels[J]. Computers & Structures, 1993, 48(4): 661-675.
[16] Denli H, Sun J Q. Structural-acoustic optimization of sandwich cylindrical shells for minimum interior sound transmission[J]. Journal of Sound and Vibration, 2008, 316(1): 32-49.
[17] Wang S, Lee J. Acoustic design sensitivity analysis and optimization for reduced exterior noise[J]. AIAA Journal, 2001, 39(4): 574-580.
/
| 〈 |
|
〉 |
CJA