ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Effect of Geometric Dimensions on Aerodynamic Performance of Hypersonic Inlet
Received date: 2013-09-09
Revised date: 2013-11-04
Online published: 2013-11-20
To investigate the effects of size construction ratio of model on hypersonic inlet's aerodynamic performances, numerical simulation for hypersonic inlet model with different size construction ratios was carried out. The results indicated that as the construction ratio increased, the total-pressure recovery coefficient, Mach number and the mass flow coefficient of inlet isolator's exit all raised while the static pressure ratio declined. And the trend is more apparent at higher free-stream Mach number. Theoretical analysis and numerical simulation show that the illustrated phenomenon is mainly attributed to the change of the relative thickness of boundary layer at different conditional Reynolds numbers. Through the theoretical analysis on the quantitative correlation between the total-pressure recovery coefficient and the size construction ratio, as for the inlet model investigated in this paper, when the relative thickness of boundary layer decreased by 1%, the total pressure recovery coefficient of inlet isolator's exit would increase by about 0.7%.
WANG Yagang , YUAN Huacheng , GUO Rongwei . Effect of Geometric Dimensions on Aerodynamic Performance of Hypersonic Inlet[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014 , 35(7) : 1893 -1901 . DOI: 10.7527/S1000-6893.2013.0459
[1] Tang M. Airbreathing hypersonic propulsion at Pratt & Whitney-overview, AIAA-2005-3258.Reston: AIAA, 2005.
[2] Kumar A, Philip J D, Charles R M, et al. Research in hypersonic airbreathing propulsion at the NASA Langley research center//15th International Symposium on Air Breathing Engines, 2001: 1-16.
[3] Rozario D, Zouaoui Z. Computational fluid dynamic analysis of scramjet inlet, AIAA-2007-30.Reston: AIAA, 2007.
[4] Yuan H C, Guo R W. Investigation of an experiment project of hypersonic inlet with different forebody widths[J]. Acta Aeronautica et Astronautica Sinica,2012,33(4): 617-624. (in Chinese) 袁化成, 郭荣伟.一种前体加宽型高超声速进气道试验方案研究[J]. 航空学报, 2012, 33(4): 617-624.
[5] Martin J. The X-43A hyper-X mach 7 flight 2 guidance, navigation,and control overview and flight test results, AIAA-2005-3275.Reston: AIAA, 2005.
[6] Wang J Q, Ni Z Y, Li S X, et al. Numerical simulation of two-dimensional super/hypersonic inlet flowfields[J]. Acta Aeronautica et Astronautica Sinica,2005,26(2): 153-157. (in Chinese) 王军旗, 倪招勇, 李素循, 等.二维超/高超声速进气道流场数值模拟[J]. 航空学报,2005,26(2): 153-157.
[7] Chen M. How to determine the scale ratio of wind tunnel test models by CFD-a leap in the design standard of wind tunnel test models from the perception to the reason[J]. Journal of Astronautics,2007,28 (3): 594-597.(in Chinese) 陈谟.如何使用CFD来确定风洞实验模型的缩尺比例——风洞试验模型设计准则从感性到理性的飞跃[J].宇航学报, 2007, 28(3): 594-597.
[8] Chen M. On the relationship of the similarity criterion, wind tunnel scales and date accuracy[J]. Journal of Astronautics,1997,18 (1): 40-46.(in Chinese) 陈谟.论相似准则、风洞尺寸与数据精、准度与关系[J]. 宇航学报,1997,18 (1): 40-46.
[9] Ingenito A, Gulli S, Bruno C. Sizing of TBCC hypersonic airbreathing vehicles, AIAA-2009-5186.Reston: AIAA, 2009.
[10] Jin L, Liu J, Luo S B, et al. Numerical study on the influence of model scale and inflow conditions in wind tunnel experiment[J]. Acta Aerodynamica Sinica, 2010,28(3):341-345.(in Chinese) 金亮, 柳军, 罗世彬, 等.数值模拟模型尺寸与来流条件 对实验数据的影响[J].空气动力学学报, 2010, 28(3): 341-345.
[11] Yuan H C, Guo R W. Design and experimental verification of hypersonic inlet with rectangular section[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2009, 41(4): 423-428. (in Chinese) 袁化成, 郭荣伟.矩形截面高超声速进气道气动设计及实验验证[J].南京航空航天大学学报, 2009, 41(4): 423-428.
[12] Christian T W, Thomas H, Evans S W, et al. The effect of boundary layer trips on intake separation in Crosswinds,AIAA-2008-4077.Reston: AIAA, 2008.
[13] Motycka D L. Reynolds number and fan/inlet coupling effects on subsonic transport inlet distortion[J].Journal of Propulsion and Power, 1985(3): 229-234.
[14] Chen M Z. Fundamentals of viscous fluid dynamics[M]. Beijing: Higher Education Press, 1984: 31-33. (in Chinese) 陈懋章.粘性流体动力学基础[M].北京: 高等教育出版社, 1984: 31-33.
[15] Seddon J. Boundary-layer interaction effects in intakes with particular reference to those designed for dual subsonic and supersonic performance, No.3565.London: Her Majesty's Stationery office, 1970.
/
| 〈 |
|
〉 |
CJA