TU Jilin
,
WANG Yongjun
,
ZHANG Jichun
,
WU Jianjun
,
WEI Shengmin
. Analysis and Experiment on Buckling of Rubber Bladder Forming of Thin Aluminum Alloy Plate Parts[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014
, 35(8)
: 2341
-2347
.
DOI: 10.7527/S1000-6893.2013.0438
[1] Zhu M H, Wang W B, Bao Y D, et al. Research on precise blank prediction method of aircraft part of rubber bladder forming[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(3): 670-676. (in Chinese) 朱明华, 王文斌, 鲍益东, 等. 飞机橡皮囊成形零件毛坯精确预示方法研究[J]. 航空学报, 2013, 34(3): 670-676.
[2] Sala G. A numerical and experimental approach to optimise sheet stamping technologies: part II - aluminium alloys rubber-forming[J]. Materials & Design, 2001, 22(4): 299-315.
[3] Dirikolu M H, Akdemir E. Computer aided modelling of flexible forming process[J]. Journal of Materials Processing Technology, 2004, 148(3): 376-381.
[4] Hatipoglu H A, Polat N, Koksal A, et al. Modeling flexforming (fluid cell forming) process with finite element method[J]. Key Engineering Materials, 2007, 344: 469-476.
[5] Chen L, Qiu X, Li S L, et al. Analysis and experiment study on springback of straight flanging in rubber fluid forming[J]. Journal of Plasticity Engineering, 2008, 15(3): 47-50. (in Chinese) 陈磊, 邱晞, 李善良, 等. 橡皮液压成形直弯边回弹试验与分析研究[J]. 塑性工程学报, 2008, 15(3): 47-50.
[6] Wu N, Han Z R, Zhan Q X, et al. Springback analysis study of shrink flanging in rubber fluid forming[J]. Journal of Shenyang Institute of Aeronautical Engineering, 2009, 26(5): 7-10. (in Chinese) 吴娜, 韩志仁, 詹庆西, 等. 凸弯边零件液压橡皮成形回弹数值模拟分析[J]. 沈阳航空工业学院学报, 2009, 26(5): 7-10.
[7] Xu Z W. The FEM simulation of rubber forming[J]. Machine Building & Automation, 2006, 35(3): 78-81. (in Chinese) 徐作文. 橡皮成形的有限元模拟[J]. 机械制造与自动化, 2006, 35(3): 78-81.
[8] Yu T X, Zhang L C. The elastic wrinkling of an annular plate under uniform tension on its inner edge[J]. International Journal of Mechanical Sciences, 1986, 28(11): 729-737.
[9] Coman C D, Haughton D M. Localized wrinkling instabilities in radially stretched annular thin films[J]. Acta Mechanica, 2006, 185(3-4): 179-200.
[10] Coman C D, Haughton D M. On some approximate methods for the tensile instabilities of thin annular plates[J]. Journal of Engineering Mathematics, 2006, 56(1): 79-99.
[11] Wang X, Cao J. An analytical prediction of flange wrinkling in sheet metal forming[J]. Journal of Manufacturing Processes, 2000, 2(2): 100-107.
[12] Zhang F Q, Tao Y R, Huang C Q, et al. Wrinkling analysis of flange in the process of sheet drawing[J]. Forging & Stamping Technology, 2004, 29(2): 18-20. (in Chinese) 张福全, 陶友瑞, 黄长清, 等. 薄板拉深中法兰区的屈曲分析[J]. 锻压技术, 2004, 29(2): 18-20.
[13] Fan M H, Zhou X B. Analysis of induced compressive stress in diagonal tensile test of square specimen[J]. Journal of Beijing University of Aeronautics and Astronautics, 1992, 18(4): 127-132. (in Chinese) 范淼海, 周贤宾. 方板对角拉伸诱导压应力的分析[J]. 北京航空航天大学学报, 1992, 18(4): 127-132.
[14] Wan M, Wang J, Xu W L. Wrinkle behavior of automobile thin sheet metals by modified Yoshida buckling test [J]. Materials Science and Technology, 2004, 12(4): 442-445. (in Chinese) 万敏, 王菁, 徐伟力. 汽车薄钢板不均匀拉伸皱曲行为研究[J]. 材料科学与工艺, 2004, 12(4): 442-445.
[15] Yang W J, Li D S, Li X Q. Simplified numerical analysis model of rubber forming process for aluminum alloy sheet [J]. China Mechanical Engineering, 2009, 20(19): 2382-2386. (in Chinese) 杨伟俊, 李东升, 李小强. 铝合金板橡皮成形简化数值分析模型研究[J]. 中国机械工程, 2009, 20(19): 2382-2386.
[16] Gao H Z, Zhou X B. Formability and numerical simulation for as-quenched aluminum alloy sheet[J]. Journal of Aeronautical Materials, 2008, 28(5): 27-31. (in Chinese) 高宏志, 周贤宾. 新淬火状态硬铝合金板的成形性能及数值模拟[J]. 航空材料学报, 2008, 28(5): 27-31.
CJA