ACTA AERONAUTICAET ASTRONAUTICA SINICA >
A Nonuniform Offset Surface Rigidity Compensation Strategy in Numerical Controlled Machining of Thin-walled Cantilever Blades
Received date: 2012-08-01
Revised date: 2012-09-17
Online published: 2013-03-29
Supported by
National Natural Science Foundation of China (51105312)
It is difficulty to produce high quality thin-walled cantilever blades in numerical controlled(NC) machining due to cutting force induced workpiece deflections which result in surface errors on the machined blades. The methodology presented in this paper aims to compensate the rigidity of blades for induced surface errors in finish machining by modifying the machining allowances in the rough/semi-finish NC machining procedure. To ensure this, a nonuniform offset surface is introduced. First, the influence of cross-sectional thickness on the deflection of thin-walled plates under concentrated forces is discussed. Second, linear and sinusoidal functions are adopted to plan the uneven offset values for the nonuniform offset surface respectively along the radial and cross-sectional direction of the blades. Finally, based on the primary cross-sectional curves, the nonuniform offset surface is constructed by lofting. The experimental results show that the nonuniform offset surface can improve the rigidity of the test blades in finish machining, and the test blades machined this way can meet the design requirements.
SHAN Chenwei , ZHAO Ying , LIU Weiwei , ZHANG Dinghua . A Nonuniform Offset Surface Rigidity Compensation Strategy in Numerical Controlled Machining of Thin-walled Cantilever Blades[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013 , 34(3) : 686 -693 . DOI: 10.7527/S1000-6893.2013.0107
[1] Wu K, He N, Liao W H, et al. Study on machining deformations and their control approaches of the thin-web in end milling. China Mechanical Engineering, 2004, 15(8): 670-674. (in Chinese) 武凯, 何宁, 廖文和, 等. 薄壁腹板加工变形规律及其变形控制方案的研究. 中国机械工程, 2004, 15(8): 670-674.
[2] Bai W J, Ke Y L, Wu H B, et al. Numerical simulation and analysis of symmetry and step-symmetry milling of aerospace thin-walled workpiece. China Mechanical Engineering, 2009, 20(2): 214-217.(in Chinese) 白万金, 柯映林, 吴红兵, 等. 航空薄壁件对称及阶梯对称铣削的数值仿真与分析. 中国机械工程, 2009, 20(2): 214-217.
[3] Zhang C, Zhou L S, An L L, et al. Modeling and wear-induced error compensation of ball-end milling cutter wear. Journal of Mechanical Engineering, 2008, 44(2): 207-218. (in Chinese) 张臣, 周来水, 安鲁陵, 等. 球头铣刀刀具磨损建模与误差补偿. 机械工程学报, 2008, 44(2): 207-218.
[4] Wan M, Zhang W H, Qin G H, et al. Strategies for error prediction and error control in peripheral milling of thin-walled workpiece. International Journal of Machine Tools and Manufacture, 2008, 48(12-13): 1366-1374.
[5] Rai J K, Xirouchakis P. Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components. International Journal of Machine Tools and Manufacture, 2008, 48(6): 629-643.
[6] Bera T C, Desai K A, Rao P V M. Error compensation in flexible end milling of tubular geometries. Journal of Materials Processing Technology, 2011, 211(1): 24-34.
[7] Habibi M, Arezoo B, Vahebi Nojedeh M. Tool deflection and geometrical error compensation by tool path modification. International Journal of Machine Tools and Manufacture, 2011, 51(6): 439-449.
[8] Zhou X L, Zhang W H, Qin G H, et al. On optimizing fixture layout and clamping force simultaneously using genetic algorithm. Mechanical Science and Technology, 2005, 24(3): 340-342.(in Chinese) 周孝伦, 张卫红, 秦国华, 等. 基于遗传算法的夹具布局和夹紧力同步优化. 机械科学与技术, 2005, 24(3): 340-342.
[9] Liu S G, Zheng L, Zhang Z H, et al. Optimization of the number and positions of fixture locators in the peripheral milling of a low-rigidity workpiece. The International Journal of Advanced Manufacturing Technology, 2006, 33(7-8): 668-676.
[10] Sánchez H T, Estrems M, Faura F. Analysis and compensation of positional and deformation errors using integrated fixturing analysis in flexible machining parts. The International Journal of Advanced Manufacturing Technology, 2006, 29(3): 239-252.
[11] Chen W F, Lou P H, Chen H. Active compensation methods of machining deformation of thin-walled parts. Acta Aeronautica et Astronautica Sinica, 2009, 30(3): 570-576.(in Chinese) 陈蔚芳, 楼佩煌, 陈华. 薄壁件加工变形主动补偿方法. 航空学报, 2009, 30(3): 570-576.
[12] Fan K G, Yang J G, Yao X D, et al. Error compensation for shaft parts in batch manufacture based on Newton interpolation. Journal of Mechanical Engineering, 2011, 47(9): 112-116. (in Chinese) 范开国, 杨建国, 姚晓栋,等. 基于牛顿插值的批量轴类零件加工误差补偿. 机械工程学报, 2011, 47(9): 112-116.
[13] Wang G, Shan Y, Wu R R. Compensation of electrode orbiting in electrical discharge machining based on non-uniform offsetting. Journal of Zhejiang University: Engineering Science, 2006(9): 1604-1608. (in Chinese) 王刚, 单岩, 吴荣仁. 电火花摇动加工中的曲面非均匀偏置补偿技术. 浙江大学学报: 工学版, 2006 (9): 1604-1608.
[14] Bai Y, Zhang D H, Ren J X, et al. High quality geometric modeling of blade. Mechanical Science and Technology, 2003, 22 (3): 447-449. (in Chinese) 白瑀, 张定华, 任军学, 等. 叶片高质量造型方法研究. 机械科学与技术, 2003, 22 (3): 447-449.
[15] Bentamy A, Guibault F, Trepanier J Y. Cross-sectional design with curvature constraints. Computer-Aided Design, 2005, 37 (14): 1499-1508.
[16] Shan C W, Zhang D H, Liu W W, et al. A novel spiral machining approach for blades modeled with four patches. The International Journal of Advanced Manufacturing Technology, 2009, 43 (5): 563-572.
[17] Poliakoff J F, Wong Y K, Thomas P D. An automated curve fairing algorithm for cubic B-spline curves. Journal of Computational and Applied Mathematics, 1999, 102 (1): 73-85.
[18] Hsu T H, Lai J Y, Ueng W D. On the development of airfoil section inspection and analysis technique. The International Journal of Advanced Manufacturing Technology, 2006, 30 (1): 129-140.
/
| 〈 |
|
〉 |
CJA