ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Thermal-mechanical Analysis and Test Study of a New Integrated Thermal Protection System
Received date: 2012-11-05
Revised date: 2013-02-02
Online published: 2013-03-08
Supported by
National Natural Science Foundation of China (91216302, 91016029, 11272107)
The demanding requirements of high-speed aircraft for structural efficiency lead to their thermal protection system to be lightweight and integrated. The new thermal-mechanical coupling integrated thermal protection system (ITPS) has great potential for development. Firstly, the concept and characteristics of a new integrated thermal protection structure design are explained and the basic design criteria are summarized. Numerical analysis is completed to study the impact of structural parameters on temperature response and the critical buckling load. The results show that web thickness has the greatest impact on the bottom temperature as well as the critical buckling load. ITPS panels and unit-cell test samples are designed and then manufactured in order to conduct insulation performance test at 800 ℃ and buckling performance mechanical tests. The experiments show that web structure is the key factor causing the thermal short circuit effect and buckling. The results of the buckling tests are consistent with finite element analysis, and high-temperature buckling analysis shows that the temperature gradient has great impact on the buckling form.
XIE Weihua , HUO Shiyu , YANG Qiang , DU Chong , MENG Songhe , HAN Jiecai . Thermal-mechanical Analysis and Test Study of a New Integrated Thermal Protection System[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013 , 34(9) : 2169 -2176 . DOI: 10.7527/S1000-6893.2013.0124
[1] Guan C L, Li Y, He X D. Research status of structures and materials for reusable TPS. Aerospace Materials & Technology, 2003(6): 7-11. (in Chinese) 关春龙, 李垚, 赫晓东. 可重复使用热防护系统防热结构及材料的研究现状. 宇航材料工艺, 2003(6): 7-11.
[2] Bapanapalli S K, Martinez O M, Gogu C, et al. Analysis and design of corrugated-core sandwich panels for thermal protection systems of space vehicles. AIAA-2006-1942, 2006.
[3] Pichon T, Soyris P, Foucault A, et al. Thermal protection systems technologies for re-entry vehicles. AIAA-2006-7950, 2006.
[4] Libove C, Hubka R E. Elastic constants for corrugated core sandwich plates. NACA-TN-2289, 1951.
[5] Lok T S, Cheng Q H. Elastic stiffness properties and behavior of truss-cross sandwich panel. Journal of Structure Engineering, 2000, 126(5): 552-559.
[6] Lok T S, Cheng Q H, Heng L. Equivalent stiffness parameters of truss-core sandwich panel. Proceedings of the 9th International Offshore and Polar Engineering Conference, 1999: 282-288.
[7] Martinez O A, Bapanapalli S, Sankar B, et al. Micromechanical analysis of composite truss-core sandwich panels for integral thermal protection systems. AIAA-2006-1876, 2006.
[8] Martinez O A, Sankar B V, Haftka R T, et al. Micromechanical analysis of composite corrugated-core sandwich panels for integral thermal protection systems. AIAA Journal, 2007, 45(9): 2323-2336.
[9] Martinez O A, Sharma A, Sankar B V, et al. Thermal force and moment determination of an integrated thermal protection system. AIAA Journal, 2010, 48(1): 119-128.
[10] Martinez O A, Sankar B V, Haftka R T. Two-dimensional orthotropic plate analysis for an integral thermal protection system. AIAA Journal, 2012, 50(2): 387-398.
[11] Gogu C, Bapanapalli S K, Haftka R T, et al. Comparison of materials for an integrated thermal protection system for spacecraft reentry. AIAA-2007-1860, 2007.
[12] Gogu C, Bapanapalli S K, Haftka R T, et al. Dimensionality reduction approach for response surface approximations application to thermal design. AIAA Journal, 2009, 47(7): 1700-1708.
[13] Sharma A, Gogu C, Martinez O A, et al. Multi-fidelity design of an integrated thermal protection system for spacecraft reentry. AIAA-2008-2062, 2008.
[14] Sharma A, Sankar B V, Haftka R T. Multi-fidelity analysis of corrugated-core sandwich panels for integrated thermal protection systems. AIAA-2009-2201, 2009.
[15] Sharma A, Sankar B V, Haftka R T. Homogenization of plates with microstructure and application to corrugated core sandwich panels. AIAA-2010-2706, 2010.
/
| 〈 |
|
〉 |
CJA