This study is based on the shipboard Mark 7 Mod 1 arresting system and extends it to Mark 7 Mod 3 arresting system with the help of its experiential formula.First,the stroke of K-5 cam is extended to 4.65 m by redesigning the cam configuration to optimize the arresting system,so that the capacity of the arresting system is increased.Second,the mass of the main pressure carriage and the elasticity of the cable should be considered in the arresting system,so the kinetic simulation consists of the inertia of the main pressure carriage,the damper sheaves and the aircraft.Third,the arresting system model is extended with the addition of damper sheaves,so a more accurate and complete model is established.Finally,in light of the cam configuration and the discharge coefficient variation,an accurate hydraulic model is proposed to analyze the relationship between the states of the aircraft and the arresting system parameters.
ZHU Qidan
,
WEN Zixia
,
ZHANG Zhi
. Kinetic Modeling and Simulation of Shipboard Arresting System[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012
, (3)
: 520
-529
.
DOI: CNKI:11-1929/V.20110823.1120.004
[1] Song J C, Wang Y, Zhang Z W,et al.Study on the electro-hydraulic proportional controlled aircraft arresting system.Acta Aeronautica et Astronautica Sinica,2005,26(5): 520-523.(in Chinese) 宋锦春, 王艳, 张志伟, 等.飞机阻拦系统电液比例控制研究.航空学报, 2005,26(5): 520-523.
[2] Wu J, Yuan Z H,He C A.Control principle and method analysis of an aircraft arresting system.Journal of Air Force Engineering University:Natural Science Edition,2002, 4(4): 1-3.(in Chinese) 吴娟, 袁朝辉, 何长安.某型飞机阻拦系统控制原理及方法分析.空军工程大学学报:自然科学版, 2002, 4(4): 1-3.
[3] Wu J.Research on analysis and control of airplane arresting system.Xi'an:Northwestern Polytechnical University,2003.(in Chinese) 吴娟.飞机拦阻系统分析与控制研究.西安:西北工业大学, 2003.
[4] Zhang S S, Jin D P.Nonlinear optimal control of aircraft arresting pross.Acta Aeronautica et Astronautica Sinica, 2009, 30(5): 849-854.(in Chinese) 张澍森, 金栋平.飞机阻拦过程的非线性最优控制.航空学报, 2009, 30(5): 849-854.
[5] Jin C J,Hong G X.Dynamic problems of carrier aircraft catapult launching and arrest landing.Acta Aeronautica et Astronautica Sinica,1990,11(12):B534-B542.(in Chinese) 金长江, 洪冠新.飞舰载机弹射起飞及拦阻着舰动力学问题.航空学报, 1990, 11(12): B534-B542.
[6] Zhang M H, Yuan L, Hong G X.Aircraft carrier hydraulic arresting gear arresting force modeling and simulation.Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(1): 100-103.(in Chinese) 张明辉, 袁理, 洪冠新. 航空母舰液压阻拦系统阻拦力建模与仿真.北京航空航天大学学报, 2010, 36(1): 100-103.
[7] Louise M F.A study of the effect of different cam designs on Mark 7 Mod 1 arresting gear performance.ADA 061486, 1978.
[8] George M L.Development of a mathematical performance prediction model for rotary-hydraulic-type arresting gears.AD893157, 1972.
[9] U.S.Navy Landing Signal Officer School.Landing signal officer reference manual. Virginia: Landing Signal Officers School Naval Air Station Oceana,1999: I-9-1-I-7-31.
[10] Kraut W K, Swiencinski H J.Reliability of the Mark 7 Mod 3 arresting gear.AD-845390, 1968.
[11] Barron R T.Design optimization and performance prediction of a shorebased aircraft recovery system by mathematical model computer simulation.AD-740098, 1972.
[12] Rolek L S, Jr.Performance analysis of a turbo-type energy absorber for an aircraft carrier arresting gear.AD-728682,1971.
[13] Cliff R, Kahn J P.Availability and expectation of successful operation of Mark7 arresting gear.AD-693468, 1969.
[14] Licoln J W.Aircraft landing dynamics analysis.Volume 1:equations of motion.ADA240123, 1987.
[15] Kevlin S G.Evaluation of the 500s arresting-gear system.AD-886597, 1971.
[16] Glessner C, Cane S T.Flight deck arresting gear and barricade configuration criteria for Mark 7 Mod 3 arresting engine.AD-864089, 1969.
[17] Mikhaluk D, Voinov I, Borovkov A. Finite element modeling of the arresting gear and simulation of the aircraft deck landing dynamics.7th European LS-DYNA Conference.2009.
[18] Li Z Y, Wan H X, He X F, et al.Hydraulic component and system.Beijing:China Machine Press, 2005: 165-166.(in Chinese) 李壮云, 万会雄, 贺小峰, 等.液压元件与系统.北京:机械工业出版社, 2005: 165-166.