Articles

Research of Retractable Grid Applied to Morphing Winglet

Expand
  • 1. State Key Laboratory of Mechanics and Control for Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China;
    2. Department of Aircraft Structure, Shanghai Aircraft Design and Research Institute, Shanghai 200232, China;
    3. Department of Aerodynamics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received date: 2011-01-14

  Revised date: 2011-03-24

  Online published: 2011-10-27

Abstract

Winglets can inhibit the formation of wingtip vortices and reduce the induced drag. The height of a winglet is one of the most critical parameters in drag reduction efficiency. Current winglet designs are typically optimized for cruise conditions. But they are inefficient in off-design conditions, such as takeoff, climb and landing. Morphing winglets can optimize the drag reduction efficiency through changing their geometric dimensions during flight. This paper investigates a retractable grid for morphing winglets which are actuated by a stepper motor to change the winglet heights at various flight conditions. According to the dynamic analysis based on automatic dynamic analysis of mechanical systems (ADAMS), the change rate of the winglet height reaches up to 13.9% and the cycle is less than 4.4 s when the motor torque is 970.9 N·mm. The simulation has been verified by model test. Subsequently, the effects of a morphing winglet on wingtip vortices and aerodynamic performance are estimated through computational fluid dynamics (CFD) and wind tunnel test. The test results show that increasing the winglet height is beneficial to inhibiting the wingtip vortices. The maximum decrease of wingtip vortices can be as high as 47.7%. With the increase of winglet height, the lift coefficient is also improved by 3.5% and the drag coefficient is reduced by 4.8% during the takeoff phase (Mach number Ma=0.1, angle of attack α=6°). Therefore, morphing winglet with retractable grid has the potential of improving aircraft takeoff performance.

Cite this article

LI Wei, XIONG Ke, CHEN Hong, WANG Bangfeng, GU Yunsong . Research of Retractable Grid Applied to Morphing Winglet[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2011 , 32(10) : 1796 -1805 . DOI: CNKI:11-1929/V.20110526.1753.016

References

[1] Whitcomb R T. A design approach and selected wind tunnel results at high subsonic speeds for wing-tip mounted winglets. NASA TN D-8260, 1976.

[2] 马汉东,崔尔杰. 大型飞机阻力预示与减阻研究[J]. 力学与实践,2007, 29(2): 1-8. Ma Handong, Cui Erjie. Drag prediction and reduction for civil transportation aircraft[J]. Mechanics in Engineering, 2007, 29(2): 1-8. (in Chinese)

[3] Ursache N M, Melin T, Isikveren A T, et al. Morphing winglets for aircraft multi-phase improvement. AIAA-2007-7813,2007.

[4] Boeing. Statistical summary of commercial jet airplane accidents. Seattle, WA: Boeing Commercial Airplanes, 2008.

[5] Gatto A, Mattioni F, Friswell M I. Experimental investigation of bistable winglets to enhance wing lift takeoff capability[J]. Journal of Aircraft, 2009, 46(2): 647-655.

[6] Bourdin P, Gatto A, Friswell M I. Aircraft control via variable cant-angle winglets[J]. Journal of Aircraft, 2008, 45(2): 414-423.

[7] Bourdin P, Gatto A, Friswell M I. The application of variable cant angle winglets for morphing aircraft control. AIAA-2006-3660, 2006.

[8] Ameri N, Lowenberg M H, Friswell M I. Modelling the dynamic response of a morphing wing with active winglets. AIAA-2007-6500, 2007.

[9] Ursache N M, Melin T, Isikveren A T, et al. Technology integration for active poly-morphing winglets development. SMASIS2008-496, 2008.

[10] Catalano F M, Ceron-Munoz H D. Experimental analysis of aerodynamics characteristics adaptive of multi-winglets[J]. Journal of Aerospace Engineering, 2006, 220(3): 209-215E.

[11] Shelton A, Tomar A, Prasad J V R, et al. Active multiple winglets for improved unmanned-aerial-vehicle performance [J]. Journal of Aircraft, 2006, 43(1): 110-116.

[12] Sankrithi M, Fromme J B. Controllable winglets: USA, US 2008/0308683 A1. 2008-12-18.

[13] 江永泉. 飞机翼梢小翼设计[M]. 北京: 航空工业出版社,2009: 1-20. Jiang Yongquan. Aircraft winglet design[M]. Beijing: Aviation Industry Press, 2009: 1-20. (in Chinese)

[14] 徐新,赵选民,周喜军,等. 基于正交设计的某型飞机翼尖小翼优化设计方法研究[J]. 航空计算技术,2004, 34(4): 13-16. Xu Xin, Zhao Xuanmin, Zhou Xijun, et al. Study of method of design of winglet on wingtip of certain type of plane based on perpendicular design[J]. Aeronautical Computer Technique, 2004, 34(4): 13-16. (in Chinese)

[15] 吴希拴,师小娟,王建培. 无人机翼尖小翼参数优化及风洞试验研究[J]. 飞行力学,2004, 22(1): 30-32. Xu Xishuan, Shi Xiaojuan, Wang Jianpei. Data optimization and wind tunnel test of UAV winglets[J]. Flight Dynamics, 2004, 22(1): 30-32. (in Chinese)

[16] 党铁红,陆红雷. 民用飞机翼梢小翼的设计研究[J]. 民用飞机设计与研究,2003, (4): 13-16. Dang Tiehong, Lu Honglei. Winglet of civil aircraft design and research[J]. Civil Aircraft Design and Research, 2003, (4): 13-16. (in Chinese)

[17] 马裕. 翼尖小翼飞行试验结果分析及其设计[J]. 航空学报,1987, 8(2): 22-31. Ma Yu. An analysis of flight test and design consideration[J]. Acta Aeronautica et Astronautica Sinica, 1987, 8(2): 22-31. (in Chinese)

[18] Ishimitsu K K. Design and analysis of winglets for military aircraft. AFFDL-TR-76-6, 1975.

[19] 顾蕴松,程克明,郑新军. 翼尖涡流场特性及其控制[J]. 空气动力学学报,2008, 26(4): 446-451. Gu Yunsong, Cheng Keming, Zheng Xinjun. Flow field characteristics of wing tips vortex and its control [J]. Acta Aerodynamica Sinica, 2008, 26(4): 446-451. (in Chinese)

[20] 顾蕴松,明晓. 舰船飞行甲板真实流场特性试验研究[J]. 航空学报,2001, 22(6): 500-504. Gu Yunsong, Ming Xiao. Experimental investigation on flowfield properties around aft-deck of destroyer[J]. Acta Aeronautica et Astronautica Sinica, 2001, 22(6): 500-504. (in Chinese)
Outlines

/