[1] ALVAREZ D J, KLYDE D H, LOTTERIO M, et al. Fixed-base piloted simulation evaluation of pitch axis fly-by-wire flight control system characteristics:AIAA-2013-4508[R]. Reston:AIAA, 2013. [2] 高金源, 李陆豫, 冯亚昌, 等. 飞机飞行品质[M]. 北京:国防工业出版社, 2003. GAO J Y, LI L Y, FENG Y C, et al. Aircraft handling qualities[M]. Beijing:National Defense Industry Press, 2003 (in Chinese). [3] 国防科学技术工业委员会. 有人驾驶飞机(固定翼)飞行品质:GJB 185-86[S]. 北京, 1986. State Commission of Science and Technology for National Defense Industry. Flying qualities of piloted airplanes(fixed wing):GJB 185-86[S]. Beijing:State Commission of Science and Technology for National Defense Industry, 1986 (in Chinese). [4] United States Department of Defense. Military standard, flying qualities of piloted aircraft:MIL-STD-1797A[S]. USA:United States Department of Defense, 2004. [5] MITCHELL D G, HOH R H, APONSO B L, et al. Proposed incorporation of mission-oriented flying qualities into MIL-STD-1797A[R]. USA:Systems Technology Inc Hawthorne CA, 1994. [6] ILOPUTAIFE O, SVOBODA G, BAILEY T. Handling qualities design of the C-17A for receiver-refueling:AIAA-1996-3746[R]. Reston:AIAA, 1996. [7] GIBSON J. Evaluation of alternate handling qualities criteria in highly augmented unstable aircraft:AIAA-1990-2844[R]. Reston:AIAA, 1990. [8] WILSON D J, RILEY D R, CITURS K D. Aircraft maneuvers for the evaluation of flying qualities and agility. Volume 2:Maneuver descriptions and section guide[M]. Saint Louis:Mcdonnell Douglas Aerospace, 1993. [9] 龙晋伟, 潘文俊, 王立新, 等. 基于任务评定的战斗机大迎角飞行控制律设计方法[J]. 北京航空航天大学学报, 2014, 40(6):844-848. LONG J W, PAN W J, WANG L X, et al. Design approach of nonlinear flight control law for fighter at high angle-of-attack based on mission-oriented flying qualities method[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(6):844-848 (in Chinese). [10] 侯天俊, 郭有光, 王立新. 基于任务的飞机大迎角飞行品质评定准则[J]. 北京航空航天大学学报, 2015, 41(9):1736-1741. HOU T J, GUO Y G, WANG L X. Mission-oriented flying qualities criteria for high angle of attack aircraft[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(9):1736-1741 (in Chinese). [11] 张聪, 田福礼, 刘超, 等. 超机动飞机飞行控制及大迎角飞行品质研究[J]. 航空工程进展, 2011, 2(4):383-388. ZHANG C, TIAN F L, LIU C, et al. Research on flight control and flight qualities at high angle of attack for a super-maneuverable aircraft[J]. Advances in Aeronautical Science and Engineering, 2011, 2(4):383-388 (in Chinese). [12] WILSON D J, RILEY D R, CITURS K D. Aircraft maneuvers for the evaluation of flying qualities and agility. Volume 1:Maneuver development process and initial maneuver set[M]. Saint Louis:Mcdonnell Douglas Aerospace, 1993. [13] WILSON D J, RILEY D R, CITURS K D. Aircraft maneuvers for the evaluation of flying qualities and agility. Volume 3:Simulation data[M]. Saint Louis:Mcdonnell Douglas Aerospace, 1993. [14] WILSON D J, DAVID R R, KEVIN D C. Aircraft maneuvers for the evaluation of flying qualities and agility. Volume 4:Flight test plan[M]. Saint Louis:Mcdonnell Douglas Aerospace, 1993. [15] KLYDE D, APONSO B, MITCHELL D, et al. Development of demonstration maneuvers for aircraft handling qualities evaluation:AIAA-1997-3653[R]. Reston:AIAA, 1997. [16] MYERS T, KLYDE D, MAGDALENO R, et al. Development and evaluation of aircraft ground handling maneuvers and metrics:AIAA-2001-4011[R]. Reston:AIAA, 2001. [17] 张翔伦, 左玲, 杨蔷薇. 基于机动动作链的飞行品质评价方法研究[J]. 飞行力学, 2006, 24(3):13-16. ZHANG X L, ZUO L, YANG Q W. Research on the maneuvers-based flying qualities evaluating method[J]. Flight Dynamics, 2006, 24(3):13-16 (in Chinese). [18] 冯红星. 基于飞行任务的飞行品质评估方法研究[D]. 南京:南京航空航天大学, 2009. FENG H X. Research on the mission-based flying qualities evaluating method[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2009 (in Chinese). [19] WANG L X, GUO Y G, ZHANG Q, et al. Suggestion for aircraft flying qualities requirements of a short-range air combat mission[J]. Chinese Journal of Aeronautics, 2017, 30(3):881-897. [20] KLYDE D H, MITCHELL D G, LATIMER K J. Development of the probe-and-drogue handling qualities demonstration maneuver[J]. Journal of Guidance, Control, and Dynamics, 1999, 22(4):528-535. [21] 曹华姿, 郭有光, 王立新. 基于任务的硬式加油伸缩管操纵品质研究[J]. 航空学报, 2018, 39(4):121523. CAO H Z, GUO Y G, WANG L X. Handling qualities research of flying boom for air-to-air refueling based on mission-oriented method[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(4):121523 (in Chinese). [22] WANG L X, YIN H P, GUO Y G, et al. Closed-loop motion characteristic requirements of receiver aircraft for probe and drogue aerial refueling[J]. Aerospace Science and Technology, 2019, 93:105293. [23] YUE T, ZHANG Q, YIN H P, et al. Suggested closed-loop response characteristics for tanker in aerial refueling via mission-oriented evaluation[J]. Science China Technological Sciences, 2019, 62(3):490-501. [24] 殷海鹏, 王立新, 乐挺, 等. 舵面破损对飞机轴间运动耦合飞行品质的影响[J]. 航空学报, 2021, 42(6):124364. YIN H P, WANG L X, YUE T, et al. Influence of control surface damage on flying qualities of inter-axis motion coupling[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(6):124364 (in Chinese). [25] WANG L X, ZUO X S, LIU H L, et al. Flying qualities evaluation criteria design for scaled-model aircraft based on similarity theory[J]. Aerospace Science and Technology, 2019, 90:209-221. [26] 葛立超. 基于任务的无人机飞行品质评估方法研究[D]. 南京:南京航空航天大学, 2014. GE L C. Unmanned aerial vehicle flying qualities evaluation method research based on task[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2014 (in Chinese). [27] CHEN J F, LI W Z, WANG Y, et al. Flying qualities specifications framework for unmanned aircraft systems based on mission task elements[C]//2020 3rd International Conference on Unmanned Systems (ICUS). Piscataway:IEEE Press, 2020:863-867. [28] 张宏林. 基于任务科目的直升机飞行品质评定试飞技术研究[J]. 航空科学技术, 2015, 26(4):62-67. ZHANG H L. The research in flight test technology of the helicopter flying quality evaluation based on MTEs[J]. Aeronautical Science & Technology, 2015, 26(4):62-67 (in Chinese). [29] COTTING M C. UAV performance rating scale based on the cooper-harper piloted rating scale:AIAA-2011-0923[R]. Reston:AIAA, 2011. [30] ACOSTA D M, YILDIZ Y, CRAUN R W, et al. Piloted evaluation of a control allocation technique to recover from pilot-induced oscillations[J]. Journal of Aircraft, 2014, 52(1):130-140. [31] 张奇, 王立新, 郭有光. 常规准则对加油机飞行品质评定的适用性[J]. 飞行力学, 2017, 35(4):1-5, 9. ZHANG Q, WANG L X, GUO Y G. Applicability of conventional criteria in evaluating flying qualities of the tanker[J]. Flight Dynamics, 2017, 35(4):1-5, 9 (in Chinese). [32] GOLDBERG A. Army-air force relations:The close air support issues[M]. Santa Monica:The Rand Corporation, 1971 [33] 殷海鹏. 基于任务的战斗机飞行品质要求建议[D].北京:北京航空航天大学, 2020. YIN H P. Suggested requirements for fighter flying qualities via mission-oriented evaluation[D]. Beijing:Beihang University, 2020 (in Chinese). [34] BALL R E. The fundamentals of aircraft combat survivability analysis and design[M]. 2nd ed. Reston:AIAA, 2003 [35] WARWICK K. An introduction to control systems[M]. 2nd ed. Singapore:World Scientific, 1996 [36] TASCHNER M. A handling qualities investigation of conventional, rate command/attitude hold, and attitude command/attitude hold response-types in the probe and drogue air refueling task[D]. Wright-Patterson Air Force Base:Air Force Institute of Technology, 1994 [37] 郭有光. 空中加油的飞行品质评定方法研究[D].北京:北京航空航天大学, 2017. YIN H P. Aerial refueling mission flying qualities evaluation[D]. Beijing:Beihang University, 2017 (in Chinese). [38] BASKETT B. Aeronautical design standard performance specification handling qualities requirements for military rotorcraft:ADS-33E-PRF[S]. Hampton:Army Aviation and Missile Command, 2000. [39] LEMERY J, RYAN K, MARTEN D, et al. Limited handling qualities evaluation of inter-axis control coupling:AIAA-2011-6543[R]. Reston:AIAA, 2011. |