[1] Cao J W, Wang H G. Predominance of ducted solid rocket ramjet applied to airborne missile[J]. Aero Weaponry, 2009(2): 47-49 (in Chinese). 曹军伟, 王虎干. 固体火箭冲压发动机在空空导弹上应用的优势[J]. 航空兵器, 2009(2): 47-49.
[2] Huo D X, Chen L Q, Liu N S, et al. Effects of boron particles diameter on ignition position and combustion efficiency[J]. Journal of Solid Rocket Technology, 2004, 27(4): 31-34 (in Chinese). 霍东兴, 陈林泉, 刘霓生, 等. 硼粒子直径对点火位置及燃烧效率的影响研究[J]. 固体火箭技术, 2004, 27(4): 31-34.
[3] Xu C, Li J X, Feng X P, et al. Influence of afterburning chamber length on secondary combustion for solid ducted rocket motor[J]. Journal of Solid Rocket Technology, 2007, 30(4): 292-294 (in Chinese). 许超, 李进贤, 冯喜平, 等. 补燃室长度对固冲发动机二次燃烧的影响[J]. 固体火箭技术, 2007, 30(4): 292-294.
[4] Li Z Y, Hu J X, Xia Z X, et al. Effects of side-inlet angle on the performance of boron-based propellant ducted rocket[J]. Journal of National University of Defense Technology, 2008, 30(2): 5-8 (in Chinese). 李泽勇, 胡建新, 夏智勋, 等.进气道角度对含硼推进剂固冲发动机性能的影响[J]. 国防科技大学学报, 2008, 30(2): 5-8.
[5] Wan S W, He G Q. The effect of mixing-enhanced device on the combustion performance of solide rocket-ramjet motor[J]. Journal of Projectiles, Rockets, Missiles and Guidance , 2011, 31(4): 108-109 (in Chinese). 万少文, 何国强. 掺混装置对固冲发动机掺混燃烧性能的影响[J]. 弹箭与制导学报, 2011, 31(4): 108-109.
[6] Tian L H, Tian W P, Dong X G, et al. Effect of structural parameters of afterburning chamber on mixing and combustion efficiency for solid rocket ramjet[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2014, 34(4): 128-130 (in Chinese). 田凌寒, 田维平, 董新刚, 等. 固体冲压发动机补燃室结构参数对掺混燃烧效率的影响[J]. 弹箭与制导学报, 2014, 34(4): 128-130.
[7] Wang X L, Sun Z H, He Y J, et al. Research on internal flowfield in afterburning chamber of ducted rocket with a head bilateral inlet configuration[J]. Aero Weaponry, 2011(5): 53-57 (in Chinese). 王希亮, 孙振华, 贺永杰, 等. 头部两侧进气固冲发动机补燃室内流场研究[J]. 航空兵器, 2011(5): 53-57.
[8] Zhang C J, Guo J W,Wei X S. Experimental design and data processing[M]. Beijing: Chemical Industry Press, 2009: 8-35 (in Chinese). 张成军, 郭继伟, 魏绪树. 实验设计与数据处理[M]. 北京: 化学工业出版社, 2009: 8-35.
[9] Chen K.Design and analysis of experiments[M]. Beijing: Tsinghua University Press, 1998: 27-40 (in Chinese). 陈魁. 实验设计与分析[M]. 北京: 清华大学出版社, 1998: 27-40.
[10] Natan B, Gany A. Ignition and combustion of boron particles in the flowfield of a solid fuel ramjet[J]. Journal of Propulsion and Power, 1991, 7(1): 37-43.
[11] Ma Z B, Zhang Z P, Cai X Y. Numerical study of mixing flows in a ducted rocket combustor[J]. Journal of Propulsion Technology, 1998, 19(4): 33-36 (in Chinese). 马智博, 张振鹏, 蔡选义. 3 火箭冲压发动机掺混流场数值方法研究[J]. 推进技术, 1998, 19(4): 33-36.
[12] Vanka S P. Analytical characterization of flow fields in side inlet dump combustors, AIAA-1983-1399[R]. Reston: AIAA, 1983.
[13] King M K. Boron ignition and combustion in air augmented rocket afterburners[J]. Combustion Science and Technology, 1972, 5(4): 155-164.
[14] King M K. Boron particle ignition in hot gas stream[J]. Combustion Science and Technology, 1973, 8(5-6): 255-273.
[15] King M K. Ignitionand combustion of boron particles and clouds[J]. Journal of Spacecraft, 1982, 19(4): 294-305.
[16] Mohan G, Willams F A. Ignition and combustion of boron in O2/inert atmospheres[J]. AIAA Journal, 1974, 10(6):776-783.
[17] Yeh C L, Kuo K K. Ignition and combustion of boron particles[J]. Progress of Energy and Combustion Science, 1996, 22(3): 511-541.
[18] Yang S, Feng X P, Lin Z Y. Analysis of boron particle combustion in hot air[J]. Journal of Solid Rocket Technology, 2011, 34(2): 95-98 (in Chinese). 杨澍, 冯喜平, 林志远. 热空气中硼粒子燃烧分析[J].固体火箭技术, 2011, 34(2): 95-98.
[19] Dong Y, Yu W Z, Lv X C. Numerical simulation and experimental investigation on the airbreathing combustor of a solid propellant ramrocket[J]. Journal of Propulsion Technology, 1995(1): 27-32 (in Chinese). 董岩, 余为众, 吕希诚. 固体火箭冲压发动机二次燃烧室流场数值计算和试验研究[J]. 推进技术, 1995(1): 27-32.
[20] Wang Y Q, Li L H, Liu M L, et al. Analysis of combustion efficiency for ducted rocket[J]. Journal of Propulsion Technology, 2011, 32(4): 75-79 (in Chinese). 王玉清, 李立翰, 刘鸣雳, 等. 固体火箭冲压发动机燃烧性能评价方法[J]. 推进技术, 2011, 32(4): 75-79. |