基于纬线法的鼓形刀具刀位误差分布计算

doi:10.7527/S1000-6893.2014.0338

Abstract

Abstract:

The tool position error distribution plays an important role in the strip-width calculation and the description of the spatial relationship between the cutter surface and designed surface. In order to improve the efficiency and precision about the tool position error distribution calculation of barrel cutter, a latitude circle center location algorithm based on the latitude separation approach is presented in this paper. The shortest distances between cutter surface and designed surface are calculated according to the center of a series of latitude circles in the new algorithm, then the tool position error distribution curve can be obtained. There are three different means dealing with latitude circles, namely latitude circle arc envelope algorithm, latitude circle arc discretization algorithm, and latitude circle center location algorithm. Firstly, the fundamental principles of three algorithms are introduced respectively while the main factors on the calculation efficiency and precision are analyzed. Secondly, the different influences of latitude circle number on the calculation efficiency and precision are compared in three algorithms. Finally, a given example verifies the validity of the concepts and algorithms in this paper. The results show that the strip-width calculation errors of the three algorithms are less than 5%. The latitude circle discretization algorithm is the most time-consuming, and the calculation time of latitude circle envelope algorithm is reduced by 50% while the calculation time of latitude circle center location algorithm is reduced by 80%. The latitude circle center location algorithm and latitude circle discretization algorithm are similar in terms of the calculation precision, but the improvement of calculation precision is less than 5% compared to the latitude circle envelope algorithm.

Key words: discretization mode, tool position error distribution, the shortest distance, barrel cutter, latitude approach, envelope theory

CLC Number:

MENG Fanjun, CHEN Zhitong, NING Tao, XU Rufeng. Calculation of tool position error distribution of barrel cutter based on latitude approach[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(12): 4014-4024.

References

[1] Li L, Chen B, Liu F, et al. Complexity analysis and calculation for sculptured surface in multi-axis CNC machining based on surface subdivision[J]. International Journal of Advanced Manufacturing Technology, 2014, 71(5-8):1433-1444.
[2] Gray P, Bedi S, Ismail F. Rolling ball method for 5-axis surface machining[J]. Computer-Aided Design, 2003, 35(4):347-357.
[3] Zhou F F, Lu H Z, Yuan J L, et al. Review on multi-point method for roundness error separation[J]. Advanced Materials Research, 2013, 797(2013):555-560.
[4] Senatore J, Monies F, Redonnet J M, et al. Improved positioning for side milling of ruled surfaces:Analysis of the rotation axis's influence on machining error[J]. International Journal of Machine Tools and Manufacture, 2007, 47(6):934-945.
[5] Jin M, Zhang L, Chen Z T. End-points error controlling method for torus tool position optimization in five-axis NC machining[J]. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(9):1125-1128(in Chinese).金曼,张俐,陈志同.圆环面刀具五坐标加工端点误差控制刀位优化[J].北京航空航天大学学报, 2006, 32(9):1125-1128.
[6] Chen Z T, Yue Y, Xu R F. A middle-point-error-control method in strip-width maximization-machining[J]. Journal of Mechanical Engineering, 2011, 47(1):117-123(in Chinese).陈志同,乐毅,徐汝锋.中点误差控制宽行加工算法[J].机械工程学报, 2011, 47(1):117-123.
[7] Gray P J, Bedi S, Ismail F. Arc-intersect method for 3 frac(1, 2) frac(1, 2)-axis tool paths on a 5-axis machine[J]. International Journal of Machine Tools and Manufacture, 2007, 47(1):182-190.
[8] He Y, Chen Z T, Wu X Z. Iso-parametric tool path overlapping method for sculptured surfaces in wide strip machining[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(4):1142-1148(in Chinese).贺英,陈志同,吴献珍.复杂曲面宽行加工等参数线刀轨精确搭接方法[J].航空学报, 2014, 35(4):1142-1148.
[9] Zhu Y, Ning T, Chen Z T. Kinematic analysis of cylindrical coordinate CNC machine in integral impeller machining[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(8):2364-2374(in Chinese).朱燏,宁涛,陈志同.圆柱坐标数控机床加工整体叶轮的运动学分析[J].航空学报, 2014, 35(8):2364-2374.
[10] Yan J Y, Chen Z T, He Y. A quick calculation method of tool position error based on envelope theory[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(11):2131-2139(in Chinese).颜家勇,陈志同,贺英.基于包络理论的刀位误差快速求解算法[J].航空学报, 2011, 32(11):2131-2139.
[11] Feng Y. Development of an NC programming system based on the strip-width maximization machining algorithm and research on its key technology[D]. Beijing:Beihang University, 2012(in Chinese).冯瑶.宽行加工编程系统开发及关键技术研究[D].北京:北京航空航天大学, 2012.
[12] Xu R F, Chen Z T. Study on methods for calculating tool position error distribution during 5-axis machining of sculptured surfaces[J]. Advanced Materials Research, 2011, 314(8):1517-1522.
[13] Zhu L M, Zhang X M, Ding H. Analytical expression of the swept surface of a rotary cutter using the envelope theory of sphere congruence[J]. Journal of Manufacturing Science and Engineering, 2009, 131(4):041017.
[14] Zhu L M, Ding H, Xiao Y L. Simultaneous optimization of tool path and shape for five-axis flank milling[J]. Computer-Aided Design, 2012, 44(12):1229-1234.
[15] He Y, Chen Z T. Optimising tool positioning for achieving multi-point contact based on symmetrical error distribution curve in sculptured surface machining[J]. International Journal of Advanced Manufacturing Technology, 2014, 73(5-8):707-714.
[16] Li Z Q, Chen Z T, Xiao J. Latitude distribution algorithm of cutter position optimization on drum-like cutter for strip-maximization[J]. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(6):731-735(in Chinese).李正强,陈志同,肖俊.鼓形刀宽行刀位优化纬线分割算法[J].北京航空航天大学学报, 2007, 33(6):731-735.
[17] Wang D, Chen W Y, Li T, et al. Five-axis flank milling of sculptured surface with barrel cutters[J]. Key Engineering Materials, 2009, 407(2009):292-297.
[18] Li T, Chen W Y, Xu R F, et al. Flank milling for blisk with a barrel ball milling cutter[J]. Key Engineering Materials, 2009, 407(2009):202-206.
[19] Meng F J, Chen Z T, Xu R F, et al. Optimal barrel cutter selection for the CNC machining of blisk[J]. Computer-Aided Design, 2014, 53(8):36-45.
[20] Wang R Q, Chen W Y, Xiao J, et al. Tool positioning strategy for free form surface flank grinding with drum wheel[J]. China Mechanical Engineering, 2006, 17(16):1719-1722(in Chinese).王瑞秋,陈五一,肖俊,等.鼓形砂轮周磨自由曲面刀位算法[J].中国机械工程, 2006, 17(16):1719-1722.
[21] Choi B K, Jerard R B. Sculptured surface machining theory and application[M]. Netherlands:Kluwer Academic Publishers, 1998:128.
[22] Xu R F. Research on tool position error calculation and tool path planning methods in 5-axis machining of sculptured surfaces[D]. Beijing:Beihang University, 2010(in Chinese).徐汝锋.宽行加工刀位误差求解与刀轨规划技术研究[D].北京:北京航空航天大学, 2010.

Calculation of tool position error distribution of barrel cutter based on latitude approach

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 1

Recommended Articles

Metrics

Comments