航空变频电源下笼型感应电机矩形转子槽结构优化分析

doi:10.7527/S1000-6893.2014.0052

Abstract

Abstract:

Currently high power aero-generators start to adopt variable frequency power output ranging from 360 Hz to 800 Hz, the most distinct influence of which is low starting torque of induction motor at high frequency when the variable frequency power is supplied directy. An analytical method is proposed to optimize the rectangular rotor slot of cage induction motor for starting torque maximization under the premise of invariant steady-state performance. Skin effect coefficient and slot leakage are affected by slot modification and will produce both positive and negative effects on starting torque. Combining the two factors, a dynamic rotor parameter model including slot sizes and frequency is established to revise the traditional torque formula and the starting torque equation regarding rotor slot sizes is obtained, which gains ground for the starting torque optimization. The rotor slot of a 7.5 kW induction motor is optimized with analytical method. Simulation and tests were conducted to verify the starting characteristics of the motor under aero variable frequency power supply, which verified the effectiveness of the optimization method for rectangular rotor slot.

Key words: aero variable frequency power, induction motor, deep bar, geometry optimization, starting torque

CLC Number:

DU Xiaofei, HOU Yanze, SUN Chu, ZHOU Yuanjun. Optimization analysis of rectangular rotor slot of cage induction motor operating with aero variable frequency power[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015, 36(2): 614-624.

References

[1] Jones R I. The more electric aircraft: the past and the future?[C]// IEE Colloquium on Electrical Machines and Systems for the More Electric Aircraft. Herts, London: IET, 1999: 1/1-1/4.

[2] Mecrow B, Cullen J, Mellor P. Editorial-electrical ma-chines and drives for the more electric aircraft[J]. IET Electric Power Applications, 2011, 5(1): 1-2.

[3] Olaiya M, Buchan N. High power variable frequency generator for large civil aircraft [C]//IEE Colloquium on Electrical Machines and Systems for the More Electric Aircraft. Herts, London: IET, 1999: 3/1-3/4.

[4] Provost M J. The more electric aero-engine: a general overview from an engine manufacturer[C]//International Conference on Power Electronics, Machines and Drives. Herts, London: IET, 2002: 246-251.

[5] Avery C R, Burrow S G, Mellor P H. Electrical genera-tion and distribution for the more electric aircraft[C]//Proceedings of 42nd International Universities Power Engineering Conference. Piscataway, NJ: IEEE, 2007: 1007-1012.

[6] Huang W X, Hu Y W. Research of the DTC control strategy for induction generator used in aircraft high voltage DC power system[J]. Acta Aeronautica et Astronautica Sinica, 2002, 23(4): 377-380 (in Chinese). 黄文新, 胡育文. 用于航空高压直流电源系统的笼型异步发电机控制策略的研究[J]. 航空学报, 2002, 23(4): 377-380.

[7] Liu L S, Hu Y W, Huang W X. Research on calculation of leakage reactance of dual stator-winding induction generator[J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(1): 109-114 (in Chinese). 刘陵顺, 胡育文, 黄文新. 定子双绕组异步发电机漏电抗计算的研究[J]. 航空学报, 2006, 27(1): 109-114.

[8] RTCA DO-160G Environmental conditions and test procedures for air-borne equipment[S]. Washington D. C.: Radio Technical Commission for Aeronautics, 2010.

[9] Moir I, Seabridge A. Aircraft systems: mechanical, electrical and avionics subsystems integration[M]. Hoboken, NJ: Wiley, 2008: 27, 212.

[10] Benarous M. Design of a direct on-line induction motor for variable frequency aerospace application[C]// Proceedings of the 3rd IET International Conference on Power Electronics, Machines and Drives. Herts, London: IET, 2006: 202-206.

[11] Matheson E, Karimi K. Power quality specification development for more electric airplane architectures[J]. Electronic Library, 2002, 1998: 8-28.

[12] Kabbaj H, Roboam X, Lefevre Y, et al. Skin effect characterization in a squirrel cage induction ma-chine[C]//Proceedings of the IEEE International Symposium on Industrial Electronics. Piscataway, NJ: IEEE, 1997: 532-536.

[13] Alger P L. The nature of induction machines[M]. Lon-don: Gordon and Breach, 1965: 265-272.

[14] Klingshirn E A, Jordan H E. Simulation of polyphase induction machines with deep rotor bars[J]. IEEE Transactions on Power Apparatus and Systems, 1970 PAS-89(6): 1038-1043.

[15] Yan D J, Liu R F, Hu M Q, et al. Transient starting perfor-mance of squirrel cage induction motor with time-stepping FEM[J]. Electric Machines and Control, 2003, 7(3): 177-181 (in Chinese). 严登俊, 刘瑞芳, 胡敏强, 等. 鼠笼异步电机起动性能的时步有限元计算[J]. 电机与控制学报, 2003, 7(3): 177-181.

[16] Lin D, Zhou P. An improved dynamic model for the simulation of three-phase induction motors with deep rotor bars[C]//Proceedings of International Conference on Electrical Machines and Systems. Piscataway, NJ: IEEE, 2008: 3810-3814.

[17] Xie L R, Wang Z Y, Chao Q. Research on the mechanical characteristic of squirrel cage induction motors[J]. Proceedings of the CSEE, 2008, 28(21): 68-72 (in Chinese). 谢丽蓉, 王智勇, 晁勤. 鼠笼异步电动机机械特性的研究[J]. 中国电机工程学报, 2008, 28(21): 68-72.

[18] Pedra J, Candela I, Sainz L. Modelling of squirrel-cage induction motors for electromagnetic transient programs[J]. IET Electric Power Applications, 2009, 3(2): 111-122.

[19] Repo A K, Rasilo P, Arkkio A. Dynamic electromagnetic torque model and parameter estimation for a deep-bar induction machine[J]. IET Electric Power Applications, 2008, 2(3): 183-192.

[20] Appelbaum J. Determination of slot dimensions of double squirrel-cage and deep-bar rotors[J]. IEEE Transactions on Power Apparatus and Systems, 1972, PAS-91(4): 1513-1518.

[21] Ikeda M, Hiyama T. Simulation studies of the transients of squirrel-cage induction motors[J]. IEEE Transactions on Energy Conversion, 2007, 22(2): 233-239.

[22] Smith A C, Healey R C, Williamson S. A transient in-duction motor model including saturation and deep bar effect[J]. IEEE Transactions on Energy Conversion, 1996, 11(1): 8-15.

[23] Chen S K. Electrical machine design[M]. Beijing: Me-chanical Industry Press, 2000: 50-62 (in Chinese). 陈世坤. 电机设计[M]. 北京: 机械工业出版社, 2000: 50-62.

[24] Boldea I, Nasar S A. The induction machine hand-book[M]. New York: CRC Press, 2002: 140.

Optimization analysis of rectangular rotor slot of cage induction motor operating with aero variable frequency power

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics

Comments

[1]	YAN Liming, ZHAO Dongdong, JIAO Ningfei. Robust model based-predictive torque control of aviation AC induction motor [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021, 42(9): 324700-324700.
[2]	Zhu Shengying;Cui Pingyuan;Cui Hutao;Shao Wei. Autonomous Position and Attitude Determination for Interplanetary Landers Based on Landmark Observation Angles [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2010, 31(2): 318-326.
[3]	WANG Xiao-lin;DENG Zhi-quan;ZHANG Hong-quan;YAN Yang-guang. Research and Developments of Bearingless Induction Motors [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2003, 24(3): 259-262.