周向槽机匣处理对某跨音转子性能的影响

doi:10.7527/S1000-6893.2013.0546

Abstract

Abstract:

In order to investigate the influence of casing treatment on compressor stability and to study its flow mechanism, numerical investigations are conducted to study the influence of circumferential casing grooves on the transonic compressor performance in Rotor37. A series of circumferential grooves with different depths are studied. The simulations reveal that the tip leakage vortex breaks down due to the interaction with passage shock and forms a recirculation zone which is mainly responsible for the onset of rotating stall. Circumferential casing grooves are able to delay stalls significantly. As a function of groove depth, the stall margin increment has two peaks. The stall margin increases by 6.7% and 7.3% with optimum shallow grooves and deep grooves, respectively, while the former result in even less loss in efficiency.The flow mechanism of stall margin improvement is that the casing treatment is able to reduce or even eliminate the recirculation zone caused by the tip leakage vortex breakdown. An analysis from the angle of momentum theorem is then carried out to explain the mechanism for shallow and deep grooves,respectively.

Key words: compressor, transonic compressor, stall margin, casing treatment, circumferential groove, tip leakage flow

CLC Number:

V231.3
TK12

DUAN Zhenzhen, LIU Yangwei, LU Lipeng. Influence of Circumferential Casing Grooves on Transonic Compressor Rotor Performance[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014, 35(8): 2163-2173.

References

[1] Adamczyk J J, Celestina M L, Greitzer E M. The role of tip clearance in high-speed fan stall[J]. Journal of Turbomachinery, 1993, 115(1): 28-39.

[2] Suder K L, Celestina M L. Experimental and computational investigation of the tip clearance flow in a transonic axial compressor rotor[J]. Journal of Turbomachinery, 1996, 118(2): 218-229.

[3] Schlechtriem S, Loetzerich M. Breakdown of tip leakage vortices in compressors at flow conditions close to stall, ASME 97-GT-41.Orlando: ASME, 1997.

[4] Yamada K, Funazaki K, Furukawa M. The behavior of tip clearance flow at near-stall condition in a transonic axial compressor rotor, ASME GT2007-27725. Montreal: ASME, 2007.

[5] Du J, Lin F, Chen J Y, et al. Flow structures in the tip region for a transonic compressor rotor[J]. Journal of Turbomachinery, 2013, 135(3): 031012-1-11.

[6] Koch C C. Experimental evaluation of outer case blowing or bleeding of single stage axial flow compressor-Part Ⅵ-final report, NASA CR-54592. Washington, D.C.: NASA, 1970.

[7] Lu X G, Chu W L, Zhu J Q, et al. A review of studies on casing treatment of axial-flow compressor[J]. Advances in Mechanics, 2006, 36(2): 222-232. (in Chinese) 卢新根, 楚武利, 朱俊强, 等. 轴流压气机机匣处理研究进展及评述[J]. 力学进展, 2006, 36(2): 222-232.

[8] Hathaway M D. Passive endwall treatments for enhancing stability, NASA/TM-2007-214409. Cleveland: NASA, 2006.

[9] Tu B F, Hu J, Wang Y M. Unsteady numerical analysis for casing treatment[J]. Journal of Aerospace Power, 2007, 22(9): 1475-1480. (in Chinese) 屠宝锋, 胡骏, 王永明. 机匣处理的非定常数值分析[J]. 航空动力学报. 2007, 22(9): 1475-1480.

[10] Liu X H, Sun D K, Sun X F, et al. Flow stability model for fan/compressors with annular duct and novel casing treatment[J]. Chinese Journal of Aeronautics, 2012, 25(2): 143-154.

[11] Bailey E E. Effect of grooved casing treatment on the flow range capability of a single-stage axial-flow compressor NASA/TM/X-2459. Washington, D.C.: NASA, 1972.

[12] Moore R D, Kovich G, Blade R J. Effect of casing treatment on overall and blade-element performance of a compressor rotor, NASA TN D-6538. Washington, D.C.: NASA, 1971.

[13] Takata H, Tsukuda Y. Stall margin improvement by casing treatment-its mechanism and effectiveness[J]. Journal of Engineering for Power, 1977, 99(3): 121-133.

[14] Wilke I, Kau H P. A numerical investigation of the influence of casing treatments on the tip leakage flow in a HPC front stage, ASME GT2002-30642.Amsterdam: ASME, 2002.

[15] Chu W L, Zhang H G, Wu Y H, et al. Impact of grooved width of grooved casing on stall margin improvement[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(4): 866-872. (in Chinese) 楚武利, 张皓光, 吴艳辉, 等. 槽式机匣槽宽变化对扩稳效果影响的试验与数值研究[J]. 航空学报, 2008, 29(4): 866-872.

[16] Houghton T, Day I. Enhancing the stability of subsonic compressors using casing grooves[J]. Journal of Turbomachinery, 2011, 133(2): 621007.

[17] Li X J, Chu W L, Zhang H G. Stabilizing mechanism of shallow circumferential grooves on a high loaded transonic axial-flow compressor[J]. Journal of Propulsion Technology, 2013, 34(5): 629-637. (in Chinese) 李相君, 楚武利, 张皓光. 高负荷跨声速轴流压气机周向浅槽处理机匣扩稳机理[J]. 推进技术, 2013, 34(5): 629-637.

[18] Kim J H, Choi K J, Kim K Y. Aerodynamic analysis and optimization of a transonic axial compressor with casing grooves to improve operating stability[J]. Aerospace Science and Technology, 2013, 29(1): 81-91.

[19] Huang X D, Chen H X, Fu S. CFD investigation on circumferential grooves casing treatment of a transonic compressor, ASME-GT2008-51107.Berlin: ASME, 2008.

[20] Huang X D. Numerical investigation of the stall mechanism and casing treatment of transonic compressor. Beijing: Tsinghua University, 2010. (in Chinese) 黄旭东. 跨音速压气机失速机理及机匣处理的数值研究.北京:清华大学,2010.

[21] Rabe D C, Hah C. Application of casing circumferential grooves for improved stall margin in a transonic axial compressor, ASME Paper GT2002-30641.Amsterdam: ASME, 2002.

[22] Strazisar A J, Denton J D. CFD code assessment in turbomachinery-aprogress report[J]. Global Gas Turbine News, 1995, 35(2): 12-14.

[23] Dunham J. CFD validation for propulsion system components, AGARD AR-2355. Nellie-Sur-Seine: AGARD, 1998.

[24] Liu Y W, Yu X J, Liu B J. Turbulence models assessment for large-scale tip vortices in an axial compressor rotor[J]. Journal of Propulsion and Power, 2008, 24(1): 15-25.

[25] Wilke I, Kau H P, Brignole G. Numerically aided design of a high-efficient casing treatment fora transonic compressor, ASME Paper GT2005-68993. Reno, Nevada: ASME, 2005.

Influence of Circumferential Casing Grooves on Transonic Compressor Rotor Performance

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	Bo WANG, Yanhui WU, Lingju HUANG, Zixu WANG. Corner separation control in compressor cascade based on L-shaped endwall groove [J]. Acta Aeronautica et Astronautica Sinica, 2024, 45(10): 129206-129206.
[2]	Yanzhao DONG, Yan ZHOU, Jixian ZOU, Xin WANG, Xiaodong LI, Hongshuai CUI. Grid-connection control method for air supply compressor unit of altitude test facility [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(9): 327221-327221.
[3]	Delong LIU, Haining GUO, Haibao YIN, Dejun MENG. Aerodynamic moment analysis of first stage variable stator vanes of single⁃stage transonic compressor in surge exit process [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(24): 128550-128550.
[4]	Jian ZHANG, Min ZHANG, Juan DU, Weiliang HUANG, Chaoqun NIE. Experimental investigation into adaptive Coanda jet control in highly loaded compressor [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(22): 128883-128883.
[5]	Rubing LIU, Zefan CHEN, Ruixin LIN, Qi LIN. Active control of flow-induced vibration of blades in a plane cascade by a plasma synthetic jet [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(20): 128430-128430.
[6]	Jiezhong DONG, Wuli CHU, Haoguang ZHANG, Bo LUO, Song YAN. Flow control mechanism of diffuser cascade with wavy leading⁃edge based on causal network analysis [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(19): 128336-128336.
[7]	Songbai WANG, Yong CHEN, Yadong WU, Shaoping ZHANG, Zhipeng CAO. Research progress on non-synchronous vibration of axial compressor rotor blade [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(17): 28044-028044.
[8]	Tantao LIU, Ruiyu LI, Limin GAO, Lei ZHAO. Experimental data driven cascade flow field prediction based on data assimilation [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628201-628201.
[9]	Shenren XU, Chen HE, Dakun SUN, Caijia YUAN, Dongming CAO, Jiazi ZHAO, Dingxi WANG. Efficient eigenvalue analysis method for rotating stall inception [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628248-628248.
[10]	Zhiyuan XU, Mingsui YANG, Meng WANG. Theoretical prediction and experimental study on acoustic resonance characteristics of certain type of compressor [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628236-628236.
[11]	Ronghui CHENG, Huawei YU, Songbai WANG, Lin DU, Dakun SUN, Xiaofeng SUN. Effect of aerodynamic loading coefficient on occurrence of non-synchronous vibration in a multi-stage compressor [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628722-628722.
[12]	Hongliang ZHAO, Wenqiang ZHANG, Jiahui QIU, Min ZHANG, Juan DU, Chaoqun NIE. Unsteady simulation of stall process in transonic compressor with total temperature distortion [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628319-628319.
[13]	Hui LI, Tong HUANG, Xinrong SU, Xin YUAN. DDES analysis of unsteady characteristics of interaction between tip leakage flow and wake [J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(14): 628325-628325.
[14]	Chuanjun CAO, Tianyi LIU, Wei ZHU, Jinchun WANG. Technology development in high pressure compressor of civil high bypass-ratio turbofan engine [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(12): 27824-027824.
[15]	Yinxin ZHU, Wenqiang PENG, Zhenbing LUO, Ying KANG, Zhijie ZHAO, Pan CHENG, Jiefu LIU. Influence of full⁃span dual synthetic jets on high⁃turning compressor cascade [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023, 44(12): 127734-127734.