交互式复杂曲面数控编程系统的开发研究

ACTA AERONAUTICAET ASTRONAUTICA SINICA ›› 1992, Vol. 13 ›› Issue (2): 107-109.

Previous Articles Next Articles

THE DEVELOPMENT OF INTERACTIVE GRAPHIC PROGRAMMING SYSTEM OF NC FOR COMPLEX SURFACES

Zhou Ming¹, Wang Shu-chun²

1. Northwestern Polytechnical University, Xian, 710072;2. Beijing University of Aeronautics and Astronautics, Beijing, 100083

Received:1989-12-18 Revised:1990-05-14 Online:1992-02-25 Published:1992-02-25

Abstract

Abstract:

This paper introduces an automatic NC programming system IGPS (Interactive Graphic Programming System), which can process 3D sculptured surfaces. The system is run on the microcomputer. It can be used to solve many problems such as the areamachining of a surface with some barrier surfaces, the machining of transient surface, the variant-step and variantrow-spacing machining of a surface. The system has the function of interactive operation and displaying drawings, so it can be used easily.

Key words: Complex Surfaces, CAD / CAM, NC Programming

Zhou Ming;Wang Shu-chun. THE DEVELOPMENT OF INTERACTIVE GRAPHIC PROGRAMMING SYSTEM OF NC FOR COMPLEX SURFACES[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1992, 13(2): 107-109.

[1]	Zeng Dingwen;Yang Pengji. STUDY ON INTELLIGENT PROCESS PLANNING AND GRAPHICS NCPROGRAMMING SYSTEM [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1991, 12(8): 403-410.
[2]	Hong Xingui;Zhu Xinde;Li Weiguang. AN INVESTIGATION ON THE 2D INTERACTIVE GRAPHICS NC AUTOMATIC PROGRAMMING SYSTEM [J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 1990, 11(10): 449-454.

THE DEVELOPMENT OF INTERACTIVE GRAPHIC PROGRAMMING SYSTEM OF NC FOR COMPLEX SURFACES

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 2

Recommended Articles

Metrics

Comments