To meet the requirements of heavy transportation tasks such as extraterrestrial resource exploitation and base construction, inte-grated design for landing and traveling becomes an effective approach to improve the structural reuse rate of lunar surface vehi-cles and reduce additional layout costs. However, this imposes high design requirements on the wheels that directly contact the lunar surface. To adapt to both landing and traveling scenarios, the design requirements for wheel stiffness under different sce-narios are first explored. The results show that high wheel stiffness in the landing scenario helps improve landing stability and suppress vehicle rebound, while low stiffness in the soft lunar terrain traveling scenario significantly enhances vehicle traction performance. To meet the different stiffness requirements of the two scenarios, three wheel stiffness regulation schemes are pro-posed: flexible spoke pre-tension control, self-contact metamaterial deformation control, and shear band overall stiffness en-hancement. Subsequently, with buffering performance and minimum radial stiffness as objectives, the advantages and disad-vantages of the three stiffness regulation schemes are analyzed and compared. Finally, based on the comparison results, a com-prehensive design process for the integrated landing and traveling design objective is established. Applying this process reduces the peak impact acceleration of the vehicle during landing by 13.09%, while reducing the radial stiffness of the wheel during traveling by 29.32%. These conclusions provide a reference for the integrated landing and traveling structural design of heavy lunar surface vehicles.
[1] 周建平.载人月球探测专刊序[J].中国空间科学技术(中英文),2026,46(02):2.
ZHOU J P. Preface to the Special Issue on Manned Lu-nar Exploration[J]. China Space Science and Technol-ogy (Chinese & English), 2026, 46(02): 2 (in Chinese).
[2] XIA Y F, GAO Y Y, HAN W B, et al. Lunar base infra-structure construction: Challenges and future direc-tions[J]. Automation in Construction, 2025, 176: 106251.
[3] HU T, YANG Z, KANG Z Z, et al. Population of de-grading small impact craters in the Chang'E-4 landing area using descent and ground images[J]. Remote Sens-ing, 2022, 14(15): 3608.
[4] PATON M D, S?VIJARVI H, HARRI A M, et al. In-ferred wind speed and direction during the descent and landing of Perseverance on Mars[J]. Icarus, 2024, 415: 116045.
[5] Hu L Q, Gao H B, LIU Z, et al. Configuration design and kinematic performance analysis of a parallel wheelset suspension for a multi-wheeled pressurized lunar rover [J]. Acta Astronautica, 2024, 217: 162-80.
[6] WANG K, SUN K, WANG C, et al. Design of Integrat-ed Suspension for Landing and Traveling of Manned Lunar Mobile System [C]. 2022 International confer-ence on advanced robotics and mechatronics (ICARM 2022). 2022: 769-73.10.1109/ICARM54641.2022.9959652.
[7] ZOU M, ZHU J Z, WANG K, et al. Design and me-chanical behavior evaluation of flexible metal wheel for crewed lunar rover [J]. Acta Astronautica, 2020, 176: 69-76.
[8] WINTERS H K E A .Lunar module /LM/ soil mechan-ics study, volume 1 Final report, May 1966 - Feb. 1968[J]. 1968.
[9] 钟世英.模拟月壤力学特性及软着陆足垫动力响应研究[D].浙江大学,2012.
Zhong S Y. Study on mechanical behaviors of lunar soil simulant and footpad dynamic response in soft land-ing[D]. Zhejiang University,2012 (in Chinese).
[10] WEI X H, LIN Q, NIE H, et al. Investigation on soft-landing dynamics of four-legged lunar lander[J]. Acta Astronautica, 2014, 101: 55-66.
[11] 王廷章,全齐全,艾鑫,等.小行星探测器电磁阻尼着陆缓冲遇阻特性[J].航空学报,2023,44(13):97-109.
WANG T Z, QUAN Q Q, AI X, et al. Electromagnetic damping buffering characteristics of aster-oid probe upon encountering obstructions[J]. Acta Aeronautica et Astronautica Sinica, 2023, 44(13): 227783 (in Chinese).
[12] ZHOU X H, NIU C, JIA S, et al. Design and realization of landing–moving integrated gear for mobile lunar lander[J]. Space Sci Technol, 2024, 4: 0169.
[13] 贾山,白雪,徐亮,等.基于限力杆吸能的轻小型着陆机构缓冲力学性能分析[J].宇航学报,2025,46(12):2541-2549.
JIA S, BAI X, XU L, et al. Analysis of Impact-absorption Mechanical Properties of Lightweight Land-ing Mechanism Based on Limited Force Rod Energy Absorption[J]. Journal of Astronautics, 2025, 46(12):2541-2549 (in Chinese).
[14] PUCKER T. Numerical study on modeling the soil footpad interaction of lunar soft landers at touch-down[J]. Computers and Geotechnics, 2024, 171: 106341.
[15] 高峰,尹科,孙乔,等.探月足式飞跃机器人设计与控制[J].飞控与探测,2020,3(04):1-7.DOI:10.20249/j.cnki.2096-5974.2020.04.001.
GAO F, YIN K, SUN Q, et al. Design and Control of Legged Leaping Robot in Lunar Exploration [J]. Flight Control & Detection, 2020, 3(04):1-7.DOI:10.20249/j.cnki.2096-5974.2020.04.001 (in Chi-nese).
[16] 蔡旭.轮腿式可重复着陆巡视机器人的机构设计与运动规划[D].上海交通大学,2020.
CAI X. Mechanism Design and Motion Planning of a Wheel-Legged Repetitive Landing Inspection Robot [D]. Shanghai Jiao Tong University, 2020 (in Chinese).
[17] 王康,辛鹏飞,王储,等.载人月面移动系统着陆行进一体化设计与验证[J].宇航学报,2023,44(09):1401-1410.
WANG K, XIN P F, WANG C, et al. Designand Verifi-cation of Integrated Suspension for Landing and Mov-ing of Manned Lunar Mobility System[J]. Journal of Astronautics, 2023, 44(09):1401-1410 (in Chinese).
[18] SENATORE C, SANDU C. Off-road tire modeling and the multi-pass effect for vehicle dynamics simula-tion[J]. Journal of Terramechanics, 2011, 48(4): 265-276.
[19] FAVAEDI Y, PECHEV A, SCHARRINGHAUSEN M, et al. Prediction of tractive response for flexible wheels with application to planetary rovers[J]. Journal of Ter-ramechanics, 2011, 48(3): 199-213.
[20] CARRIER W D, Iii, OLHOEFT G R, MENDELL W. Physical Properties of the Lunar Surface [J]. Lunar Sourcebook, A User's Guide to the Moon, 1991.
[21] ZHAO S P, ZHANG X T, ZHANG Z L, et al. Heavy-load variable stiffness lunar wheel based on adjustable tensegrity unit[J]. Journal of Terramechanics, 2025, 120: 101074.
[22] TENG Y, WANG S, CUI Y F, et al. Influence of loading conditions on mechanical behaviors of lunar regolith simulant WHU-1 based on Chang’e-5 returned samples [J]. Acta Geotechnica, 2025, 20(5): 2327-44.
[23] QI S W, LI L H, HOU X K, et al. Strongly cohesive lunar soil identified at the Chang’e-6 landing site [J]. Nature Astronomy, 2026, 10(2): 214-23.
[24] HONG H, DENG H. Adaptive stiffness–prestress sensi-tivity of morphing tensegrities[J]. International Journal of Solids and Structures, 2026, 330: 113878.
[25] YI J X, LYU R H, LI Y W, et al. Stability-enhanced variable stiffness metamaterial with controllable force-transferring path[J]. Advanced Functional Materials, 2025, 35(4): 2413789.
[26] PATTERSON Z J, XIAO W, SOLOGUREN E, et al. Safe control for soft-rigid robots with self-contact using control barrier functions[C]//2024 IEEE 7th Interna-tional Conference on Soft Robotics (RoboSoft). San Diego, CA, USA, 2024: 151-156.
[27] YUAN T T, TANG L L, LIU Z Y, et al. Nonlinear dy-namic formulation for flexible origami-based deploya-ble structures considering self-contact and friction[J]. Nonlinear Dynamics, 2021, 106: 1789-1822.