This study systematically investigates the phase change transpiration cooling process and heat transfer deterioration mechanisms of 3D printed metal porous media structures under non-uniform heat flux conditions using an irradiation heating experimental system. During the experiment, the low heat flux region maintained a heat flux of 71kW·m-2, while the high heat flux region exhibited a heat flux range of 84kW·m-2 to 108kW·m-2. The experimental results indicate that, under the influence of non-uniform heat flux, the high heat flux region is significantly affected by vapor blockage, leading to higher local flow resistance and difficulty in coolant supply. This results in the gradual formation of a dry-out zone, with both the structure temperature and the dry-out zone continuously increasing over time. In contrast, in the fully wetted zone of the low heat flux area, the coolant preferentially flows into this zone due to lower flow resistance, forming a dominant flow channel, which further reduces the temperature of the fully wetted zone. During the experiment, a noticeable inflection point in the temperature rise curve was observed when heat transfer deterioration occurred, where the wall temperature sharply increased after surpassing the inflection point. Due to the presence of the dominant flow channel, even when the coolant supply flow rate is increased after the wall temperature exceeds the inflection point, it becomes difficult to prevent further expansion of the dry-out zone and the continuous rise in temperature.
[1]包为民, 汪小卫.航班化航天运输系统发展展望[J].宇航总体技术, 2021, 5(03):1-6
[2]吴燕生.国航天运输系统智能飞行技术发展展望[J].宇航学报, 2023, 44(3):313-321
[3]BAO W M, WANG X W.Develop Highly Reliable and Low-Cost Technology for Access to Space,Embrace the New Space Economy Era[J].Aerospace China, 2019, 20(4):23-30
[4]朱继宏, 韩嘉诚, 谷小军, 等.跨域飞行器结构与变构型设计技术进展与挑战[J].航空学报, 2025, 46(18):431686-
[5]桂业伟, 刘磊, 魏东.长航时高超声速飞行器的综合热效应问题[J].空气动力学学报, 2020, 38(4):641-650
[6]艾邦成, 陈思员, 陈智, 等.关于高超声速飞行器新热障的认知与探讨[J].气体物理, 2023, 8(4):1-17
[7]冯志海, 师建军, 孔磊, 等.航天飞行器热防护系统低密度烧蚀防热材料研究进展[J].材料工程, 2020, 48(8):14-24
[8]FOREEST A, SIPPEL M, KLEVANSKI J, et al.Technical Background and Challenges of the SpaceLiner Concept[C]// 7th International Symposium on Launcher Technologies, Proceedings. 2007.
[9]朱广生, 姚世勇, 段毅.高速飞行器减阻降热流动控制技术研究进展及工程应用[J].航空学报, 2023, 44(15):529049-
[10]朱广生, 段毅, 姚世勇, 等.壁面质量引射对高速飞行器减阻降热影响的研究[J].空气动力学学报, 2023, 41(8):59-70
[11]ZHANG S L, LI X, ZUO J, et al.Research progress on active thermal protection for hypersonic vehicles[J]. Progress in Aerospace Sciences, 2020, 119: 100646.
[12]吴亚东, 朱广生, 蒋平, 等.先进的热防护方法及在飞行器的应用前景初探[J].宇航总体技术, 2017, 1(1):60-65
[13]黄拯.高温与超音速条件下发汗冷却基础问题研究[D]. 北京: 清华大学, 2015.
[14]HINSE M, YILDIZ K, RICHER P, et al.Numerical and experimental studies of transpiration cooling film effectiveness over porous materials[J].Journal of Thermophysics and Heat Transfer, 2022, 36(4):803-817
[15]LIU Y Q, JIANG P X, JIN S S, et al.Transpiration cooling of a nose cone by various foreign gases[J].International Journal of Heat and Mass Transfer, 2010, 53(23-24):5364-5372
[16]BHRK H.Transpiration Cooling at Hypersonic Flight - AKTiV on SHEFEXII[C]//11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference. 2014.
[17]GüLHAN A, SIEBE F, THIELE T, et al.Sharp edge flight experiment-II instrumentation challenges and selected flight data[J].Journal of Spacecraft and Rockets, 2014, 51(1):175-186
[18]TURNER J, ETTL J, H?RSCHGEN-EGGERS M, et al.Shefex II vehicle and subsystem design, flight performance and their application to future hypersonic missions[C]// Proceedings of the ESA-PAC 21st Symposium, Thun, Switzerland. 2013: 9-13.
[19]WEIHS H.Sounding rockets for entry research: SHEFEX flight test program[C]// Proceedings of the 21st ESA Symposium on Rocket and Balloon Programmes. ESA Communications, 2013: 143-152.
[20]DITTERT C.Wall thickness optimization of a transpiration-cooled sharp leading edge at atmospheric re-entry[J].Journal of Thermophysics and Heat Transfer, 2014, 28(4):890-897
[21]ZHU Y H, WEI P, XU R N.Review on active thermal protection and its heat transfer for airbreathing hypersonic vehicles[J].Chinese Journal of Aeronautics, 2018, 31(10):1929-1953
[22]胥蕊娜, 李晓阳, 廖致远, 等.航天飞行器热防护相变发汗冷却研究进展[J]. 清华大学学报（自然科学版）. 2021, 61(12): 1341-1352.
[23]栾芸, 贺菲, 王建华.临近空间飞行器发汗冷却研究进展[J].推进技术, 2023, 44(1):1-15
[24]XU R, CHENG Z, JIANG P, et al.Fundamentals and recent progress of additive manufacturing-assisted porous materials on transpiration cooling[J].Journal of the Global Power and Propulsion Society, 2023, 2023(July):19-48
[25]黄干, 廖致远, 祝银海, 等.高温主流条件下相变发汗冷却实验研究[J].工程热物理学报, 2017, 38(4):817-821
[26]李晓阳, 李浩, 姜培学, 等.陶瓷基复合材料相变发汗冷却实验研究[J].工程热物理学报, 2024, 45(2):506-513
[27]VAN FOREEST A, SIPPEL M, GüLHAN A, et al.Transpiration cooling using liquid water[J].Journal of Thermophysics and Heat Transfer, 2009, 23(4):693-702
[28]SHEN L, WANG J, DONG W, et al.An experimental investigation on transpiration cooling with phase change under supersonic condition[J]. Applied Thermal Engineering, 2016, 105: 549-556.
[29]HUANG G, ZHU Y, LIAO Z, et al.Experimental investigation of transpiration cooling with phase change for sintered porous plates[J]. International Journal of Heat and Mass Transfer, 2017, 114: 1201-1213.
[30]戴嘉鹏, 周禹, 李冬, 等.声速主流下非稳态相变发汗冷却过程研究[J].工程热物理学报, 2024, 45(2):471-477
[31]REIMER T, KUHN M, GüLHAN A, et al.Transpiration Cooling Tests of Porous CMC in Hypersonic Flow[C]// 17th International Space Planes and Hypersonic Systems and Technologies Conference. 2011.
[32]QIAN K, WANG J H, He F, et al.An experimental investigation on transpiration cooling performances using solid hydrogel as coolant[J]. Applied Thermal Engineering, 2019, 158: 113753.
CJA