脉冲压缩在铝薄板电磁超声导波检测中的应用

石文泽; 程进杰; 胡硕臻; 卢超; 陈尧

doi:10.7527/S1000-6893.2021.25063

航空学报 >

2022 , Vol. 43 >Issue 3: 425063 - 425063

DOI: https://doi.org/10.7527/S1000-6893.2021.25063

材料工程与机械制造

脉冲压缩在铝薄板电磁超声导波检测中的应用

石文泽 ,
程进杰 ,
胡硕臻 ,
卢超 ,
陈尧

展开

1. 南昌航空大学无损检测教育部重点实验室, 南昌 330063;
2. 中国科学院声学研究所声场声信息国家重点实验室, 北京 100190;
3. 赣南师范大学江西省数值模拟与仿真技术重点实验室, 赣州 341000

收稿日期: 2020-12-07

修回日期: 2020-12-23

网络出版日期: 2021-01-14

基金资助

国家自然科学基金（52065049，51705231，12064001，51705232）；江西省自然科学基金（20181BAB216020，20192ACBL20052）；江西省科技厅科技计划（20192BCD40028）

收起

Application of pulse compression in electromagnetic ultrasonic guided wave detection of aluminum sheet

SHI Wenze ,
CHENG Jinjie ,
HU Shuozhen ,
LU Chao ,
CHEN Yao

Expand

1. Key Laboratory of Nondestructive Testing, Ministry of Education, Nanchang Hangkong University, Nanchang 330063, China;
2. State Key Laboratory of Acoustic Field and Acoustic Information, Academy of Acoustics, Chinese Academy of Sciences, Beijing 100190, China;
3. Key Laboratory of Simulation and Numerical Modeling Technology of Jiangxi Province, Gannan Normal University, Ganzhou 341000, China

Received date: 2020-12-07

Revised date: 2020-12-23

Online published: 2021-01-14

Supported by

National Natural Science Foundation of China (52065049, 51705231, 12064001, 51705232); Natural Science Foundation of Jiangxi Province (20181BAB216020, 20192ACBL20052); Science and Technology Innovation Platform of Jiangxi Province (20192BCD40028)

Fold

摘要

针对电磁超声换能器（EMAT）换能效率低导致超声回波信噪比（SNR）差这一问题，基于相位编码脉冲压缩技术，讨论了匹配滤波器及旁瓣抑制滤波器的设计及其在电磁超声检测中的实现。选用典型二相编码信号-巴克码作为激励信号，分析了不同码长、载波周期数的巴克码信号对电磁超声导波检测脉冲压缩效果的影响，并研究了旁瓣抑制算法的效果。以含人工预制裂纹的7075航空铝合金薄板为检测对象，选用SH₀模态电磁超声导波换能器对比了单频正弦信号激励方式与巴克码脉冲压缩技术获得的缺陷回波信号信噪比。结果表明，采用巴克码脉冲压缩后超声回波的信噪比较单频正弦激励方式至少提高了7.2 dB，且巴克码脉冲压缩技术能探测出单频正弦激励方式而不能可靠检出的小裂纹（长×宽×深为10.0 mm×1.0 mm×0.25 mm）。将相位编码压缩技术应用于电磁超声导波检测，可达到增加EMAT提离和减小同步平均次数的目的，能满足在线快速检测的需求。

关键词： 铝合金; EMAT; SH₀导波; 巴克码; 脉冲压缩

本文引用格式

石文泽 , 程进杰 , 胡硕臻 , 卢超 , 陈尧 . 脉冲压缩在铝薄板电磁超声导波检测中的应用[J]. 航空学报, 2022 , 43(3) : 425063 -425063 . DOI: 10.7527/S1000-6893.2021.25063

Abstract

Aiming at the problem of poor Signal-to-Noise Ratio (SNR) of ultrasonic echoes caused by low energy conversion efficiency of Electromagnetic Ultrasonic Transducer (EMAT), the design of matching filter and sidelobe suppression filter and their implementation in electromagnetic ultrasonic detection were discussed based on phase-coded pulse compression technology.A typical two-phase coded signal, Barker code, was selected as the excitation signal.The effect of barker code signals with different lengths and carrier cycles on the pulse compression effect of guided wave EMAT detection was analyzed, and the effect of sidelobe suppression algorithm was also studied.We selected a 7075 aluminum alloy sheet with four manually prefabricated defects as the testing object, a SH₀ mode guided wave EMAT was used to compare the SNRs of defect echo signals obtained by single-frequency sinusoidal signal excitation method and Barker code pulse compression technology.The results show that compared with single-frequency signal excitation, the SNR of the ultrasonic signal after Barker code pulse compression was increased by at least 7.2 dB.With Barker code pulse compression technology, a defect of small size (long×wide×deep is 10.0 mm×1.0 mm×0.25 mm) can be effectively detected, which cannot be detected with the single-frequency sinusoidal signal excitation method.With the application of Barker code pulse compression technology to guided wave EMAT detection, the increase in EMAT lift-off and the reduction in the number of synchronous averages can be realized, and requirements of online and rapid inspection can be met.

Key words： aluminum alloy; EMAT; SH₀ guided wave; Barker code; pulse compression

参考文献

[1] 张俊苗, 聂宏, 薛彩军, 等.铝合金焊接接头预腐蚀强度特性及预测[J].航空学报, 2013, 34(9):2161-2168. ZHANG J M, NIE H, XUE C J, et al.Properties and prediction of pre-corrosion strength of aluminum alloy welded joints[J].Acta Aeronautica et Astronautica Sinica, 2013, 34(9):2161-2168(in Chinese).
[2] LIU C Q, LI Y G, HAO X Z.An adaptive machining approach based on in-process inspection of interim machining states for large-scaled and thin-walled complex parts[J].The International Journal of Advanced Manufacturing Technology, 2017, 90(9-12):3119-3128.
[3] 于海洋, 胡志力.DP590钢/7075铝异种金属搅拌摩擦搭接焊界面组织与力学性能研究[J].机械工程学报, 2020, 56(6):65-72. YU H Y, HU Z L.Investigation of interfacial microstructure and mechanical properties for DP590 steel/7075 aluminum dissimilar materials friction stir lap welding joints[J].Journal of Mechanical Engineering, 2020, 56(6):65-72(in Chinese).
[4] 周正干, 冯占英, 高翌飞, 等.超声导波在大型薄铝板缺陷检测中的应用[J].航空学报, 2008, 29(4):1044-1048. ZHOU Z G, FENG Z Y, GAO Y F, et al.Application of ultrasonic guided waves to defect inspection of large thin aluminum plate[J].Acta Aeronautica et Astronautica Sinica, 2008, 29(4):1044-1048(in Chinese).
[5] 李瑶, 王快社, 刘长瑞.金属板材表面缺陷检测发展现状[J].材料导报, 2011, 25(S2):238-241. LI Y, WANG K S, LIU C R.Development status of surface defects inspection for metal plants[J].Materials Review, 2011, 25(S2):238-241(in Chinese).
[6] DUAN Z J, LI C H, ZHANG Y B, et al.Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication[J].Chinese Journal of Aeronautics, 2021, 34(6):33-53.
[7] GAO H D, ALI S, LOPEZ B.Efficient detection of delamination in multilayered structures using ultrasonic guided wave EMATs[J].NDT & E International, 2010, 43(4):316-322.
[8] ROUGE C, LHÉMERY A, SÉGUR D.Modal solutions for SH guided waves radiated by an EMAT in a ferromagnetic plate[J].Journal of Physics:Conference Series, 2012, 353:012014.
[9] 刘增华, 钟栩文, 李欣, 等.基于全向性SH₀模态磁致伸缩贴片型传感器阵列的铝板缺陷成像研究[J].机械工程学报, 2018, 54(14):8-15. LIU Z H, ZHONG X W, LI X, et al.Research on damageimaging based on omnidirectional SH₀ mode magnetostrictive patch transducers array in aluminum plates[J].Journal of Mechanical Engineering, 2018, 54(14):8-15(in Chinese).
[10] 王淑娟, 康磊, 李智超, 等.电磁超声换能器三维有限元分析及优化设计[J].中国电机工程学报, 2009, 29(30):123-128. WANG S J, KANG L, LI Z C, et al.3-D finite element analysis and optimum design of electromagnetic acoustic transducers[J].Proceedings of the CSEE, 2009, 29(30):123-128(in Chinese).
[11] 时亚, 石文泽, 陈果, 等.钢轨踏面检测电磁超声表面波换能器优化设计[J].仪器仪表学报, 2018, 39(8):239-249. SHI Y, SHI W Z, CHEN G, et al.Optimized design of surface wave electromagnetic acoustic transducer for rail tread testing[J].Chinese Journal of Scientific Instrument, 2018, 39(8):239-249(in Chinese).
[12] BENEGAL R, KARIMI F, FILLETER T, et al.Optimization of periodic permanent magnet configuration in Lorentz-force EMATs[J].Research in Nondestructive Evaluation, 2018, 29(2):95-108.
[13] 刘波, 郭建中.载频调制二相编码激励的超声成像信噪比提高研究[J].电子学报, 2011, 39(11):2701-2707. LIU B, GUO J Z.Research on SNR improvement in ultrasonic imaging by coded excitation with carrier modulation[J].Acta Electronica Sinica, 2011, 39(11):2701-2707(in Chinese).
[14] 张劲东, 王海青, 朱晓华, 等.基于最大输出信噪比准则的自适应脉冲压缩[J].电子与信息学报, 2009, 31(4):790-793. ZHANG J D, WANG H Q, ZHU X H, et al.Adaptive pulse compression via MSN criteria[J].Journal of Electronics & Information Technology, 2009, 31(4):790-793(in Chinese).
[15] 韩雪梅, 彭虎, 蔡波.基于线性调频信号的高帧率超声成像系统的改进[J].生物医学工程学杂志, 2009, 26(4):761-765. HAN X M, PENG H, CAI B.Improvement on high frame rate ultrasonic imaging system based on linear frequency-modulated signal[J].Journal of Biomedical Engineering, 2009, 26(4):761-765(in Chinese).
[16] 石文泽, 陈巍巍, 陈尧, 等.基于脉冲压缩技术的高温连铸坯壳厚度测量EMAT设计及应用[J].仪器仪表学报, 2019, 40(8):119-130. SHI W Z, CHEN W W, CHEN Y, et al.Design and application of an EMAT for solidification shell thickness detection in continuous casting slab based on the pulse compression technique[J].Chinese Journal of Scientific Instrument, 2019, 40(8):119-130(in Chinese).
[17] 周正干, 马保全, 孙志明, 等.空气耦合超声检测中脉冲压缩方法的参数选优[J].北京航空航天大学学报, 2015, 41(1):1-7. ZHOU Z G, MA B Q, SUN Z M, et al.Parameter optimization of pulse compression method in air-coupled ultrasonic testing[J].Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(1):1-7(in Chinese).
[18] 周正干, 魏东, 向上.线性调频脉冲压缩方法在空气耦合超声检测中的应用研究[J].机械工程学报, 2010, 46(18):24-28, 35. ZHOU Z G, WEI D, XIANG S.Application of linear-frequency-modulation based pulse compression in air-coupled ultrasonic testing[J].Journal of Mechanical Engineering, 2010, 46(18):24-28, 35(in Chinese).
[19] 周正干, 马保全, 孙志明, 等.相位编码脉冲压缩方法在空气耦合超声检测信号处理中的应用[J].机械工程学报, 2014, 50(2):48-54. ZHOU Z G, MA B Q, SUN Z M, et al.Application of phase coded pulse compression method to air-coupled ultrasonic testing signal processing[J].Journal of Mechanical Engineering, 2014, 50(2):48-54(in Chinese).
[20] SATO R, SHINRIKI M.Time sidelobe reduction technique for binary phase coded pulse compression[J].Electronics and Communications in Japan (Part I:Communications), 2000, 84(12):52-60.
[21] BLUNT S D, GERLACH K.Adaptive pulse compression[C]//Proceedings of the 2004 IEEE Radar Conference.Piscataway:IEEE Press, 2004:271-276.
[22] RIBICHINI R, CEGLA F, NAGY P B, et al.Study and comparison of different EMAT configurations for SH wave inspection[J].IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2011, 58(12):2571-2581.
[23] 马早军.电磁超声SH导波铝板缺陷检测技术研究[D].哈尔滨:哈尔滨工业大学, 2018:13-15. MA Z J.Research on aluminum plate defect detection using electromagnetic ultrasonic SH guided wave[D].Harbin:Harbin Institute of Technology, 2018:13-15(in Chinese).
[24] 毛育青, 江周明, 刘奋成, 等.7075-T6铝合金厚板FSW焊缝沿厚度方向上的显微组织演变规律[J].航空学报, 2019, 40(5):298-306. MAO Y Q, JIANG Z M, LIU F C, et al.Microstructure evolution rule along weld thickness direction of FSW 7075-T6 aluminum alloy thick plate[J].Acta Aeronautica et Astronautica Sinica, 2019, 40(5):298-306(in Chinese).
[25] 徐磊磊, 臧会凯, 周生华, 等.一种相位编码信号及其失配滤波器设计方法[J].西安交通大学学报, 2016, 50(4):54-59, 75. XU L L, ZANG H K, ZHOU S H, et al.A design method of phase coded waveform and its mismatched filter[J].Journal of Xi'an Jiaotong University, 2016, 50(4):54-59, 75(in Chinese).
[26] AITTOMÄKI T, KOIVUNEN V.Mismatched filter design and interference mitigation for MIMO radars[J].IEEE Transactions on Signal Processing, 2017, 65(2):454-466.
[27] 徐庆, 徐继麟, 黄香馥.一种脉冲压缩信号旁瓣抑制方法[J].系统工程与电子技术, 2001, 23(5):60-61, 105. XU Q, XU J L, HUANG X F.A method for side-lobe suppression of pulse compression signal[J].Systems Engineering and Electronics, 2001, 23(5):60-61, 105(in Chinese).
[28] 张慧琳, 宋小军, 他得安.Barker码激励超声导波在长骨检测中的应用[J].声学学报, 2014, 39(2):257-263. ZHANG H L, SONG X J, TA D A.Application of Barker code excited ultrasonic guided waves to long bone detection[J].Acta Acustica, 2014, 39(2):257-263(in Chinese).

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献