收稿日期: 2017-03-02
修回日期: 2017-04-27
网络出版日期: 2017-04-26
基金资助
国家自然科学基金创新群体"精密制造理论与技术基础研究"（51621064）；国家自然科学基金面上项目（51475074）；中央高校基本科研业务费专项资金（DUT15QY37）；装备预研教育部联合基金（6141A02022106）
Abrasive flow machining of additively manufactured metal grilling parts
Received date: 2017-03-02
Revised date: 2017-04-27
Online published: 2017-04-26
Supported by
Science Fund for Creative Research Groups of NSFC (51621064);National Natural Science Foundation of China (51475074);The Fundamental Research Funds for the Central Universities (DUT15QY37);Joint Pre-research Fund of the General Armaments Department and MOE (6141A02022106)
增材制造（AM）技术对成型复杂结构零件有显著优势，但以选区激光熔融技术为代表的金属增材制造技术固有的"粉末粘附"、"球化效应"所导致的毛糙表面，使零件难以满足使用要求。采用混合粒径磨料介质对增材制造铝合金格栅外表面及细小内孔进行一体化抛光试验研究。通过分析磨粒流加工过程各阶段的微观形貌和表面轮廓测量结果等来研究材料去除过程中零件表面形貌、材料去除和表面粗糙度变化。试验结果表明，磨粒流加工方法能够有效消除"球化效应"导致的零件表面的金属球团簇聚集现象，并能够对增材制造格栅零件外表面和内孔实现有效的抛光，格栅表面粗糙度从初始的14 μm降至1.8 μm。
高航 , 李世宠 , 付有志 , 魏海波 , 彭灿 , 王宣平 . 金属增材制造格栅零件磨粒流抛光[J]. 航空学报, 2017 , 38(10) : 421210 -421210 . DOI: 10.7527/S1000-6893.2017.421210
Additive Manufacturing (AM) technology is obviously advantageous in producing parts with complex structures. However, it is difficult for the as-built surfaces of AM parts to meet the quality requirement, as the as-built surfaces are deteriorated by the inherent characteristics of powder adhesion and balling effect of metal AM technologies, e.g. Selective Laser Melting (SLM). The Abrasive Flow Machining (AFM) is used to polish the outer and inner surfaces of additively manufactured aluminum grille parts, with the abrasive media containing grits of different sizes. The variations of surface topology, material removal and surface roughness of the grille are considered by analyses of measurements of micro-topology and profiles during the AFM process. The experiment results show that clustering of molten metal balls due to the balling effect can be removed effectively from the grille surface, and the surface roughness is reduced from the initial 14 μm to the final 1.8 μm, with pretty good polishing effect being achieved for the outer and inner surfaces of the grille.
[1] BADROSSAMAY M, CHILDS T H C. Further studies in selective laser melting of stainless and tool steel powders[J]. International Journal of Machine Tools & Manufacture, 2007, 47(5):779-784.
[2] 朱伟军, 李涤尘, 任科, 等. 基于3D打印的舵面可调实用化飞机风洞模型的设计与试验[J]. 航空学报, 2014, 35(2):400-407. ZHU W J, LI D C, REN K, et al. Design and test of a practical aircraft model for wind tunnel testing with adjustable control surfaces based on 3D printing[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(2):400-407(in Chinese).
[3] 王黎. 选择性激光熔化成形金属零件性能研究[D]. 武汉:华中科技大学, 2012. WANG L. Research on the performance in selective laser melting of metallic part[D]. Wuhan:Huazhong University of Science and Technology,2012(in Chinese).
[4] 左铁钏. 高强铝合金的激光加工[M]. 北京:国防工业出版社, 2002. ZUO T C. Laser machining of high strength aluminum alloy[M]. Beijing:National Defence Industry Press, 2002(in Chinese).
[5] 张骁丽, 齐欢, 魏青松. 铝合金粉末选择性激光熔化成形工艺优化试验研究[J]. 应用激光, 2013, 33(4):391-397. ZHANG X L, QI H, WEI Q S. Experimental study of selective laser melted AlSi12[J]. Applied Laser, 2013, 33(4):391-397(in Chinese).
[6] 刘睿诚. 激光选区熔化成型零件表面粗糙度研究及在免组装机构中的应用[D]. 广州:华南理工大学, 2014. LIU R C. The study on surface roughness of metal parts fabricated by selective laser melting and the application on non-assembly mechanisms[D]. Guangzhou:South China University of Technology, 2014(in Chinese).
[7] 宋长辉. 基于激光选区熔化技术的个性化植入体设计与直接制造研究[D]. 广州:华南理工大学, 2014. SONG C H. Study on digital design and direct manufacturing of customized implant based on selective laser melting[D]. Guangzhou:South China University of Technology, 2014(in Chinese).
[8] ROSA B, MOGNOL P, HASCOET J. Laser polishing of additive laser manufacturing surfaces[J]. Journal of Laser Applications, 2015, 27(S2):S29102.
[9] LYCZKOWSKA E, SZYMCZYK P, DYBALA B, et al. Chemical polishing of scaffolds made of Ti-6Al-7Nb alloy by additive manufacturing[J]. Archives of Civil & Mechanical Engineering, 2014, 14(4):586-594.
[10] 肖贵坚, 黄云, 伊浩. 面向型面精度一致性的整体叶盘砂带磨削新方法及实验研究[J]. 航空学报, 2016, 37(5):1666-1676. XIAO G J,HUANG Y, YI H. Experimental research of new belt grinding method for consistency of blisk profile and surface precision[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(5):1666-1676(in Chinese).
[11] SINGH S, RAJ A S A, SANKAR M R, et al. Finishing force analysis and simulation of nanosurface roughness in abrasive flow finishing process using medium rheological properties[J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(9):2163-2178.
[12] KAVITHAA T S, BALASHANMUGAM N. Nanometric surface finishing of typical industrial components by abrasive flow finishing[J]. The International Journal of Advanced Manufacturing Technology, 2016, 85(9):1-8.
[13] 计时鸣, 李琛, 谭大鹏, 等. 基于Preston方程的软性磨粒流加工特性[J]. 机械工程学报, 2011, 47(17):156-163. JI S M, LI C, TAN D P, et al. Study on machinability of softness abrasive flow based on preston equation[J]. Journal of Mechanical Engineering, 2011, 47(17):156-163(in Chinese).
[14] 李俊烨, 许颖, 杨立峰, 等. 非直线管零件的磨粒流加工实验研究[J]. 中国机械工程, 2014, 25(13):1729-1734. LI J Y, XU Y, YANG L F, et al. Research on abrasive flow machining experiments of non-linear tubes[J]. China Mechanical Engineering, 2014, 25(13):1729-1734(in Chinese).
[15] FU Y Z, WANG X P, GAO H, et al. Blade surface uniformity of blisk finished by abrasive flow machining[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(5):1725-1735.
[16] 高航, 吴鸣宇, 付有志, 等. 流体磨粒光整加工理论与技术的发展[J]. 机械工程学报, 2015, 51(7):174-187. GAO H, WU M Y, FU Y Z, et al. Development of theory and technology in fluid abrasive finishing technology[J]. Journal of Mechanical Engineering, 2015, 51(7):174-187(in Chinese).
[17] WILLIAMS R E, MELTON V L. Abrasive flow finishing of stereolithography prototypes[J]. Rapid Prototyping Journal, 1998, 4(2):56-67.
[18] UHLMANN E, SCHMIEDEL C, WENDLER J. CFD simulation of the abrasive flow machining process[J]. Procedia CIRP, 2015, 31:209-214.
[19] BERGMANN C, SCHMIEDEL A, UHLMANN E. Postprocessing of selective laser melting components using abrasive flow machining and cleaning[C]//International Additive Manufacturing Symposium, 2013.
[20] ATZENI E, BARLETTA M, CALIGNANO F, et al. Abrasive fluidized bed (AFB) finishing of AlSi10Mg substrates manufactured by direct metal laser sintering (DMLS)[J]. Additive Manufacturing, 2016, 10:15-23.
[21] FURUMOTO T, UEDA T, AMINO T, et al. Finishing performance of cooling channel with face protuberance inside the molding die[J]. Journal of Materials Processing Technology, 2012, 212(10):2154-2160.
[22] FURUMOTO T, UEDA T, AMINO T, et al. A study of internal face finishing of the cooling channel in injection mold with free abrasive grains[J]. Journal of Materials Processing Technology, 2011, 211(11):1742-1748.
[23] TANNER R I. Engineering rheology[M]. Oxford:Oxford University Press, 2000.
/
| 〈 |
|
〉 |
CJA