环形轨道制孔系统定位方法分析
收稿日期: 2013-12-03
修回日期: 2014-01-21
网络出版日期: 2014-01-22
基金资助
国家自然科学基金（51305395）；中央高校基本科研业务费专项资金（2014FZA4003）
Analysis of Locating Scheme for Circumferential Track Drilling System
Received date: 2013-12-03
Revised date: 2014-01-21
Online published: 2014-01-22
Supported by
National Natural Science Foundation of China (51305395); Fundamental Research Funds for the Central Universities (2014FZA4003)
介绍了一种新型柔性便携式多轴数控制孔设备——环形轨道制孔系统，用于解决机身对接段环形区域自动化制孔问题。对该设备的主要结构及功能做了说明；利用ABAQUS软件建立了整机的有限元模型，通过有限元仿真计算得到了保证整个系统稳定定位安装所需支撑脚提供的预紧力；对设备的关键承载及导向部件——环形轨道在静载时的变形进行了仿真分析。根据有限元分析计算结果，提出了一种改善结构受力、减小环形轨道变形、提高制孔精度的定位安装方案；随后，对有限元模型进行了模态分析，考察了整机的动态特性；最后，应用工程样机进行了制孔试验，验证了环形轨道制孔系统的实际加工效果。
曲巍崴 , 方垒 , 柯映林 , 方伟 , 刘思仁 , 邢宏文 . 环形轨道制孔系统定位方法分析[J]. 航空学报, 2014 , 35(8) : 2319 -2330 . DOI: 10.7527/S1000-6893.2013.0527
In order to solve the problem of automated drilling on the circumferential region in splice section of the fuselage, a lightweight, flexible, portable, multiple spindle, automated NC machine is introduced, the circumferential track drilling system. The equipment's primary structure and functions are described in this paper. First, the finite element model of the circumferential flex track drilling system is established by ABAQUS software. Then the pretightening force of the support foot that guarantees the location and installation is calculated by simulation. The key load bearing of the equipment and the deformation of the circumferential track with static load are analyzed by simulation. According to the result of the finite element analysis, a position installation scheme is put forward to improve structure' force situation, decrease deformation of the circumferential track and increase drilling accuracy. Then a dynamic analysis is performed to demonstrate the equipment's dynamic characteristics. After a test of drilling with the prototype of the equipment, its drilling effects are verified.
[1] Qu W W, Hou P H, Yang G J, et al. Research on the stiffness performance for robot machining systems[J], Acta Aeronautica et Astronautica Sinica, 2013, 34(12): 2823-2832. (in Chinese) 曲巍崴, 侯鹏辉, 杨根军, 等. 机器人加工系统刚度性能优化研究[J]. 航空学报, 2013, 34(12): 2823-2832.
[2] Oberoi H, Draper A, Thompson P, et al. Production implementation of a multi spindle flexible drilling system for circumferential splice drilling applications on the 777 airplane//SAE Aerospace Manufacturing and Automated Fastening Conference & Exhibition. Washington, D.C.: Society of Automotive Engineers, 2009: 10-29.
[3] Boyl-Davis T, Buttrick, J, Gege R, et al. Flexible track drilling machine: USA, US 20030116331 A1. 2003-07-01.
[4] Hou Z X, Liu J D, Xue G J, et al. Control technology of flexible track automatic drilling machine[J]. Aeronautical Manufacturing Technology, 2009(24): 58-60. (in Chinese) 侯志霞, 刘建东, 薛贵军, 等. 柔性导轨自动制孔设备控制技术[J]. 航空制造技术, 2009(24): 58-60.
[5] Zhang R R, Hu Y X, Yao Z Q. Design optimization of the flex track for auto-drilling machine on large surface of aircraft assembly [J]. Modular Machine Tool & Automatic Manufacturing Technique, 2012(3): 1-5. (in Chinese) 张冉冉, 胡永祥, 姚振强. 大型小曲率部件自动制孔设备柔性导轨设计[J]. 组合机床与自动加工技术, 2012(3): 1-5.
[6] Buttrick J. Flex track drill [J]. SAE Transactions, 2003, 112(1): 389-392.
[7] Wang W. The application of AQS on the hatch door of Boeing[J]. Aeronautical Manufacturing Technology, 2003(7): 62-67. (in Chinese) 王巍. AQS 在波音飞机舱门上的应用[J]. 航空制造技术,2003(7): 62-67.
[8] Reid E. Development of portable and flexible track positioning system for aircraft manufacturing processes, 2007-01-3781. Washington, D.C.: Society of Automotive Engineers, 2007.
[9] Chen B, Liu H D, Bu Y, et al. Research on drilling experiment of flexible track automatic drilling equipment[J]. Aeronautical Manufacturing Technology, 2011(22): 78-80. (in Chinese) 陈彪, 刘华东, 卜泳, 等. 柔性轨道自动制孔设备制孔实验研究[J]. 航空制造技术, 2011(22): 78-80.
[10] Zhuang Z. Finite element analysis and application based on ABAQUS [M]. Beijing: Tsinghua University Press, 2008: 69-73.(in Chinese) 庄茁. 基于ABAQUS的有限元分析和应用[M]. 北京:清华大学出版社, 2008: 69-73.
[11] Cao J F, Shi Y P. Finite element analysis of the ABAQUS FAQ [M]. Beijing: China Machine Press, 2009: 131-147. (in Chinese) 曹金凤, 石亦平. ABAQUS有限元分析常见问题解答[M]. 北京:机械工业出版社, 2009: 131-147.
[12] Zhao T L, Yao X J. Application of ABAQUS6.6 in mechanical engineering [M]. Beijing:China WaterPower Press, 2007: 47-51. (in Chinese) 赵腾伦, 姚新军. ABAQUS6.6在机械工程中的应用[M]. 北京:中国水利水电出版社, 2007: 47-51.
[13] Teng H H. Dynamics analysis of holding force applied to objects by a vacuum disc aspirator [J]. Packaging Engineering, 2005, 25(2): 68-83. (in Chinese) 滕红华. 真空吸盘吸持物体的动力学分析[J]. 包装工程, 2005, 25(2): 68-83.
[14] Li X M, Zeng D H, Ding F. The design and application of vacuum cupule [J]. Chinese Hydraulics & Pneumatics, 2004(3): 48-49. (in Chinese) 李雪梅, 曾德怀, 丁峰. 真空吸盘的设计与应用[J]. 液压与气动, 2004(3): 48-49.
[15] Qu W X. Blade multi-axis linkage NC machine tool dynamic characteristic research. Wuhan: Huazhong University of Science and Technology, 2011. (in Chinese) 屈文晓. 叶片多轴联动数控加工机床动力学特性研究. 武汉:华中科技大学, 2011.
/
| 〈 |
|
〉 |
CJA