k/N（G）结构系统初始备件配置方法
收稿日期: 2013-06-07
修回日期: 2013-09-16
网络出版日期: 2013-09-27
基金资助
部级项目
Initial Spare Allocation Method for k/N(G) Structure System
Received date: 2013-06-07
Revised date: 2013-09-16
Online published: 2013-09-27
Supported by
Ministry Level Project
针对现有备件冗余度建模中无限呼叫总体假设不合理、供应可用度计算困难的问题，提出一种k/N（G）结构系统初始备件配置方法。首先，采用有限源排队论获取备件短缺数概率分布。然后，给出计算k/N（G）结构系统供应可用度的方案，并证明了方案的正确性。该方案在计算随机挑选的一套系统未因备件短缺而停机的概率基础上，利用k（或更多）套系统良好的二项分布概率估计系统供应可用度。最后，应用边际分析算法确定各项备件的数量。实例分析表明：该方法能优化k/N（G）结构系统各组成部件的库存数量，且与单项法相比具有明显的优势，能以较少的备件费用达到相同的供应可用度目标。
卢雷 , 杨江平 . k/N（G）结构系统初始备件配置方法[J]. 航空学报, 2014 , 35(3) : 773 -779 . DOI: 10.7527/S1000-6893.2013.0393
There are two problems in traditional spare part redundancy model. One is the illogical use of infinite calling population assumption. The other is the difficulty in computing system supply availability. In order to solve these problems, an initial spare allocation method for k/N(G) structure system is presented in this paper. Firstly, the finite source queuing theory is used to obtain backorders distribution probability of spare parts. Secondly, a scheme is established to compute the k/N(G) structure system supply availability. Rationality of the proposed scheme is proved. Probability of a randomly chosen system will not be down due to spare parts backorders being estimated, and the whole k/N(G) structure system supply availability is approximated by the binomial distribution probability that k or more systems are mission capable. Finally, the marginal analysis method is used to optimize spare parts inventory in the k/N(G) structure system. Examples show that compared to the single item method, the proposed method can achieve the same supply availability target by paying less money.
Key words： redundancy; spare parts; queues; binomial distribution; availability; marginal analysis
[1] Cai Z M, Kang R, Long J. System optimization-oriented dynamic spares configuration method[J]. System Engineering and Electronics, 2010, 32(11): 2363-2366. (in Chinese) 蔡泽明, 康锐, 龙军. 面向系统优化的备件动态配置方法[J]. 系统工程与电子技术, 2010, 32(11): 2363-2366.
[2] Sherbrooke C C. METRIC: a multi-echelon technique for recoverable item control[J]. Operations Research, 1968, 16(1): 122-141.
[3] Muckstadt J A. A model for a multi-item, multi-indenture inventory system[J]. Management Science, 1973, 20(4): 472-481.
[4] Slay F M. VARI-METRIC: an approach to modelling multi-echelon resupply when the demand process is Poisson with a Gamma prior, Report AF301-3[R]. Logistics Management Institute, 1984.
[5] Isaacson K E, Boren P, Tsai C L, et al. Dyna-METRIC version 4: modeling worldwide logistics support of aircraft components, DTIC Document R-3389-AF[R]. 1988.
[6] Kaplan A J. Incorporating redundancy considerations into stockage policy models[J]. Naval Research Logistics, 1989, 36: 625-628.
[7] Sherbrooke C C. Optimal inventory modeling of systems multi-echelon techniques[M]. New York: Wiley, 1992: 105-115.
[8] Cochran J K, Lewis T P. Computing small-fleet aircraft availabilities including redundancy and spares[J]. Computers & Operations Research, 2002, 29(5): 529-540.
[9] Zhou J H, Xiao G, Sun G J. Simulation-based method for computation reliability and optimum quantity of N: K (m) cross-strapping standby system[J]. Journal of System Simulation, 2001, 13(2): 159-162. (in Chinese) 周江华, 肖刚, 孙国基. N:K系统可靠度及备件量的仿真计算方法[J]. 系统仿真学报, 2001, 13(2): 159-162.
[10] Zhang T, Guo B, Wu X Y, et al. Spare availability model for system with various configurations[J]. Acta Aeronautica et Astronautica Sinica, 2005, 26(2): 203-207. (in Chinese) 张涛, 郭波, 武小悦, 等. 任意结构系统的备件可用度评估模型[J]. 航空学报, 2005, 26(2): 203-207.
[11] Ruan M Z, Li Q M, Peng Y W, et al. Model of spare part fill rate for systems of various structures and optimization method[J]. System Engineering and Electronics, 2011, 33(8): 1799-1803. (in Chinese) 阮旻智, 李庆民, 彭英武, 等. 任意结构系统的备件满足率模型及优化方法[J]. 系统工程与电子技术, 2011, 33(8): 1799-1803.
[12] Nie T, Sheng W. Research on two-echelon supply support optimizing for repairable spares parts of K: N system[J]. System Engineering and Electronics, 2010, 32(7): 1452-1455. (in Chinese) 聂涛, 盛文. K:N系统可修复备件两级供应保障优化研究[J]. 系统工程与电子技术, 2010, 32(7): 1452-1455.
[13] Huang Z X, Gao Q, Ge Y, et al. Optimization model of spares inventory based on typical series-parallel connection system[J]. Mathematics in Practice and Theory, 2012, 42(18): 195-201. (in Chinese) 黄照协, 高崎, 葛阳, 等. 典型串并联系统的备件库存优化模型[J]. 数学的实践与认识, 2012, 42(18): 195-201.
[14] Meng Y K. Foundation and application of queuing theory[M]. Shanghai: Tongji University Press, 1989: 143-147. (in Chinese) 孟玉珂. 排队论基础及应用[M]. 上海: 同济大学出版社, 1989: 143-147.
[15] Rustenburg J W. A system approach to budget-constrained spare parts management[D]. Eindhoven: Eindhoven University of Technology, 2000.
[16] Commission of Science and Technology Industry for National Defense. GJB 4355—2002 Spares provisioning requirements[S]. Beijing: National Defense Industry Press, 2002. (in Chinese) 国防科学技术工业委员会. GJB 4355—2002 备件供应规划要求[S]. 北京: 国防工业出版社, 2002.
/
| 〈 |
|
〉 |
CJA