GH4169高温合金高应变率本构关系试验研究
收稿日期: 2012-04-06
修回日期: 2012-07-17
网络出版日期: 2013-04-23
Experimental Study of Constitutive Relationship of Superalloy GH4169 Under High Strain Rates
Received date: 2012-04-06
Revised date: 2012-07-17
Online published: 2013-04-23
基于高应变率下GH4169高温合金的本构关系是采用有限元法对GH4169高温合金进行切削加工数值分析研究的基础。本文针对GH4169高温合金,通过试验对其在温度为室温至1 000 ℃、应变率为2 000～10 000 s-1的范围内的本构关系进行了研究。研究发现高应变率下GH4169高温合金的流动应力与塑性应变关系接近线性关系,同时温度影响着高应变率下应变率对本构关系的影响程度及方式。根据GH4169合金流动应力曲线的特点,对Johnson-Cook本构模型进行修正。基于试验结果,通过数据拟合确定了对应高应变率GH4169高温合金的材料常数,建立了描述GH4169高温合金高应变率下的本构模型,为切削加工有限元数值分析提供了理论基础,并为相关类似研究提供了思路。
王涛 , 陈国定 , 巨江涛 . GH4169高温合金高应变率本构关系试验研究[J]. 航空学报, 2013 , 34(4) : 946 -953 . DOI: 10.7527/S1000-6893.2013.0155
Finite element numerical simulation of the cutting of superalloy GH4169 is based on its constitutive model, which describes the relationship between stress and strain under high strain rates. In this paper, the constitutive relationship of superalloy GH4169 with temperature in the range from room temperature to 1 000 ℃ and strain rates in the range of 2 000-10 000 s-1 is studied by experiments. The results show that the relationship between flow stress and plastic strain is close to linear relationship. Meanwhile temperature affects the degree and mode of the influence of strain rate on the constitutive relationship. According to the characteristics of flow stress curve of superalloy GH4169, the Johnson-Cook constitutive model is modified. Based on experimental results, the constitutive parameter values are determined by data fitting and a constitutive model of superalloy GH4169 is built. The work of this paper provides not only a basis for the numerical simulation of cutting superalloy GH4169, but also a useful reference for similar studies in future.
Key words： constitutive relationship; flow stress; high strain rate; GH4169; superalloys
[1] Kong X W, Li B, Jin Z B, et al. Broaching performance of superalloy GH4169 based on FEM. Journal of Material Science and Technology, 2011, 27(12): 1178-1184.
[2] Editorial Board of China Aeronautical Materials Handbook. China aeronautical materials handbook. Beijing: Standards Press of China, 2002: 232-359. (in Chinese) 《中国航空材料手册》编辑委员会.航空工程材料手册.北京: 中国标准出版社,2002: 232-359.
[3] Wang Z T,Zhang S H, Cheng M, et al. Kinematics and dynamics model of GH4169 alloy for thermal deformation. Journal of Iron and Steel Research, International, 2010, 17(7): 75-78.
[4] Thomas A, El-Wahabi M, Cabrera J M, et al. High temperature deformation of Inconel 718. Journal of Materials Processing Technology, 2006, 177(1-3): 469-472.
[5] Zhang J M, Gao Z Y, Zhuang J Y, et al. Strain-rate hardening behavior of superalloy IN718. Journal of Materials Processing Technology, 1997,70(1-3): 252-257.
[6] Ning Y Q, Fub M W, Chen X. Hot deformation behavior of GH4169 superalloy associated with stick δ phase dissolution during isothermal compression process. Materials Science and Engineering: A, 2012, 540: 164-173.
[7] Li M Q, Yao X Y, Luo J, et al. Study of flow stress model of the nickel-based superalloy GH4169 at high temperature deformation. Acta Metallurgica Sinica, 2007, 43(9): 937-942. (in Chinese) 李淼泉, 姚晓燕, 罗皎, 等. 镍基高温合金GH4169高温变形流动应力模型研究. 金属学报, 2007, 43(9): 937-942.
[8] Li M Q, Wang X J, Su S B, et al. Deformation behavior and processing map of the nickel-based superalloy GH4169 in the isothermal compression. China Mechanical Engineering, 2008, 19(5): 1867-1870. (in Chinese) 李淼泉, 王小津, 苏少博, 等. GH4169合金塑性变形行为及加工图.中国机械工程, 2008, 19(5): 1867-1870.
[9] Du J H, Zhuang J Y, Deng Q, et al. Impact property of alloy GH4169 at low temperature. Journal of Iron and Steel Research, 1998,10(1): 31-33.(in Chinese) 杜金辉, 庄景云, 邓群, 等. GH4169合金的低温冲击性能. 钢铁研究学报, 1998, 10(1): 31-33.
[10] Wei H L, Yang X G, Yu H C. Constitutive modeling and parameter identification of mechanical behavior for GH4169 alloy at high temperature. Journal of Materials Engineering, 2005(4): 42-45.(in Chinese) 魏洪亮, 杨晓光, 于慧臣. GH4169合金高温力学行为本构建模及参数识别.材料工程, 2005(4): 42-45.
[11] Cao M H, Chen G S, Zhou D H, et al. Influences of deformation speed and grain size on high temperature properties and microstructures of superalloy GH4169. Journal of Iron and Steel Research, 2003, 15(7):361-365.(in Chinese) 曹美华, 陈国胜, 周奠华, 等. 变形速度及晶粒度对GH4169合金高温拉伸性能和组织的影响. 钢铁研究学报, 2003, 15(7): 361-365.
[12] Guo Y B, Tang Z P, Xu S L. A critical criterion for phase transformation considering both hydrostatic pressure and deviatoric stress effects. Acta Mechanica Solida Sinica, 2004,25(4):417-422. (in Chinese) 郭扬波, 唐志平, 徐松林.一种考虑静水压力和偏应力共同作用的相变临界准则. 固体力学学报, 2004, 25(4): 417-422.
[13] Pravenn K V U, Sastry G V S, Singh V. Work-hardening behavior of the Ni-Fe based superalloy IN718. Metallurgical and Materials Transactions A, 2008, 39(1):65-78.
[14] Johnson G R, Cook W H. A constitutive model and data for metal subjected to large strains, high strain rates and high temperatures. Proceedings of the Seventh Symposium on Ballistics. The Hague, The Netherlands, 1983:541-547.
[15] Chen G, Chen Z F, Tao J L, et al. Investigation and validation on plastic constitutive parameters of 45 steel. Explosion and Shock Waves, 2005, 25(5): 541-546.(in Chinese) 陈刚, 陈忠富, 陶俊林, 等. 45钢动态塑性本构参量与验证. 爆炸与冲击, 2005, 25(5): 541-546.
/
| 〈 |
|
〉 |
CJA