设计了一台用于模拟高压压气机内部流场结构的四级重复级低速大尺寸模型压气机。对该低速模型压气机的模拟级(即第3级)进行了详细流场测量。流场测量结果以及三维流场计算结果与模拟目标值的对比表明,低速模型压气机基本达到了设计目标,在70%叶高以下,低速模型压气机可以反映出高速原型的流场结构,同时也表明所采用的"相似准则"是基本可靠的;受加工因素的影响,转子叶片的叶尖间隙明显大于设计值,从而导致在70%叶高以上区域,低速模型压气机的流场参数与设计目标存在一定的偏差,无法模拟出高速原型的流场结构。
A four-stage low speed model compressor is designed for a high pressure compressor. Detailed flow field measurements are taken in the third stage. The results of the flow field measurements and 3D flow field calculation are compared with the simulation targets, which show that the low speed model compressor reaches the design goal. Below the 70%span, the low speed model compressor can reproduce the flow structure in the high pressure compressor. It also shows that the design method of the low speed model compressor for high pressure compressor is valid, and that the "similarity criteria" are reliable. Owing to the fact that the actual tip clearance of the rotor blade is bigger than the design value as a result of imperfect machining, the low speed model compressor does not fully represent the flow domain in the tip area of the high pressure compressor above the 70% span.
[1] Chen M Z. Some issues in the research and development of aeroengine HP compressor in China. Aeroengine, 2006(2): 5-37. (in Chinese) 陈懋章. 中国航空发动机高压压气机发展的几个问题. 航空发动机, 2006(2): 5-37.
[2] Jiang H X. Some experiences and apocalypses of the development of foreign fan/compressor design system. Aeroengine, 2001(2): 45-57. (in Chinese) 蒋浩兴. 国外发展风扇/压气机设计体系的一些经验和启示. 航空发动机, 2001(2): 45-57.
[3] Wisler D C. Loss reduction in axial-flow compressor through low-speed model testing. ASME Journal of Engineering for Gas Turbines and Power, 1985, 107(2): 354-363.
[4] Wisler D C, Halstead D E, Beacher B F. Improving compressor and turbine performance through cost-effective low-speed testing. ISABE 99-7073, 1999.
[5] Lyes P A, Ginder R B. Experimental evaluation of the high-to-low speed transformation process for a highly loaded core compressor stage. ASME Paper 98-GT-334, 1998.
[6] Lyes P A, Ginder R B. Low-speed compressor tests of swept and bowed blade designs. ISABE 99-7048, 1999.
[7] Zhu N G, Xu L P, Chen M Z. Similarity rules for transformation between high and low speed models of high pressure axial compressor bladings. Journal of Aerospace Power, 1990, 5(3): 193-198. (in Chinese) 朱年国, 徐力平, 陈矛章. 高压压气机叶栅的高速模型和低速模型的相似变换准则. 航空动力学报, 1990, 5(3): 193-198.
[8] Zhu N G, Xu L P, Chen M Z. Experimental study on cascade similarity transformation rules. Journal of Aerospace Power, 1991, 6(3): 193-199. (in Chinese) 朱年国, 徐力平, 陈矛章. 叶栅相似变换准则的实验研究. 航空动力学报, 1991, 6(3): 193-199.
[9] Wisler D C, Bauer R C, Okiishi T H. Secondary flow, turbulent diffusion, and mixing in axial flow compressors. ASME Journal of Turbomachinery, 1987, 109(4): 455-482.
[10] Wang Z Q. Research on the method of low-speed model testing for high pressure compressor. Nanjing: College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, 2010. (in Chinese) 王志强. 高压压气机低速模拟方法研究. 南京:南京航空航天大学能源与动力学院, 2010.
[11] Zhou M L. Similarity science. Beijing: Science Press, 2004. (in Chinese) 周美立. 相似性科学. 北京: 科学出版社, 2004.
[12] Zhou M L. Similarity engineering. Beijing: China Machine Press, 1998. (in Chinese) 周美立. 相似性工程学. 北京: 机械工业出版社, 1998.
[13] Wisler D C. Core compressor exit stage study, Volume Ⅰ-bading design. NASA CR-135391, 1997.
[14] Schaffler A. Experimental and analytical investigation of the effects of Reynolds number and blade surface roughness on multistage axial flow compressors. ASME Paper 79-GT-2, 1979.
[15] Wang Z Q, Hu J, Wang Y F, et al. Aerodynamic design of low-speed model compressor for low-speed model testing. Acta Aeronautica et Astronautica Sinica, 2010, 31(4): 715-723. (in Chinese) 王志强, 胡骏, 王英锋, 等. 用于低速模拟试验的低速模型压气机气动设计. 航空学报, 2010, 31(4): 715-723.
CJA