黏弹性树脂基三维编织复合材料的变温松弛模量

固体力学与飞行器总体设计

本期目录 | 过刊浏览 | 高级检索

前一篇 | 后一篇

黏弹性树脂基三维编织复合材料的变温松弛模量

袁欣, 孙慧玉

南京航空航天大学航空宇航学院, 江苏南京 210016

收稿日期:2011-08-30 修回日期:2011-10-08 出版日期:2012-06-25 发布日期:2012-06-26
通讯作者: 孙慧玉 E-mail:hysun@nuaa.edu.cn

Relaxation Modulus of Viscoelastic Resin-based 3D Braided Composites Under Variable Temperatures

YUAN Xin, SUN Huiyu

College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

Received:2011-08-30 Revised:2011-10-08 Online:2012-06-25 Published:2012-06-26

摘要/Abstract

摘要： 利用均匀化方法,计算了树脂基三维编织复合材料在不同温度下的恒温松弛模量,通过对计算结果的分析,提出了树脂基三维编织复合材料松弛模量具有时温等效性的假设,并用数值方法验证了此假设的合理性。以该假设为基础,建立了由树脂基三维编织复合材料恒温松弛模量确定其变温松弛模量的一般方法。对模型施加合理的周期性边界条件后计算了材料编织方向的变温松弛模量,并对比了不同温度变化速率对变温松弛模量的影响。结果表明,对应于不同的温度变化历史,树脂基三维编织复合材料有不同的变温松弛模量,但稳态值相同,且快速升温可明显缩短变温松弛模量到达稳态的时间。

关键词: 黏弹性, 三维编织复合材料, 时温等效性, 均匀化方法, 周期性边界, 松弛模量

Abstract: Relaxation moduli of resin-based 3D braided composites under different temperatures are calculated using the homogenization method. Through an analysis of the calculated results, a hypothesis is proposed that the relaxation moduli of resin-based 3D braided composites have time-temperature equivalence, and the hypothesis is verified by numerical calculation. Based on the hypothesis, a general method is construsted for determining the relaxation moduli under variable temperatures from those under constant temperatures for resin-based 3D braided composites. The relaxation moduli under variable temperatures in the braiding direction are obtained by applying reasonable boundary conditions to the models, and the influence of temperature change ratio on the relaxation moduli is also studied. It is shown that for different temperature histories, the relaxation moduli of resin-based 3D braided composites are different, but the steady values tend to be the same; and the time for the relaxation moduli to reach the steady value can be significantly shortened when the temperature is increased rapidly.

中图分类号:

袁欣, 孙慧玉. 黏弹性树脂基三维编织复合材料的变温松弛模量[J]. 航空学报, 2012, (6): 1036-1043.

YUAN Xin, SUN Huiyu. Relaxation Modulus of Viscoelastic Resin-based 3D Braided Composites Under Variable Temperatures[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2012, (6): 1036-1043.

参考文献

[1] Jiang B, Wu D H. Creep mixture rule of polymer matrix fiber-reinforced composite materials. Acta Materiae Compositae Sinica, 1990, 7(2): 71-79. (in Chinese) 江冰, 吴代华. 聚合物基纤维增强复合材料的蠕变混合律. 复合材料学报, 1990, 7(2): 71-79.

[2] Luciano R, Barbero E J. Relaxation moduli of linear viscoelastic composites with periodic miciostructure. Journal of Applied Mechanics, 1995, 62(3): 786-793.

[3] Liang J, Du S Y. Study of mechanical properties of visco-elastic matrix composite by micromechanics. Acta Materiae Compositae Sinica, 2001, 18(1): 97-100. (in Chinese) 梁军, 杜善义. 粘弹性复合材料力学性能的细观研究. 复合材料学报, 2001, 18(1): 97-100.

[4] Liu S T, Ma N. Study on the thermal stress relaxation and constitutive equations of viscoelastic composite materials, partⅠ: general theory. Acta Materiae Compositae Sinica, 2005, 22(1): 151-157. (in Chinese) 刘书田, 马宁. 复合材料粘弹性本构关系与热应力松弛规律研究Ⅰ:理论分析.复合材料学报, 2005, 22(1): 151-157.

[5] Yang Z Y, Lu Z X, Liu Z G, et al. Finite element analysis of the mechanical properties of 3-D braided composites. Acta Materiae Compositae Sinica, 2005, 22(5): 155-161. (in Chinese) 杨振宇, 卢子兴, 刘振国, 等. 三维四向编织复合材料力学性能的有限元分析. 复合材料学报, 2005, 22(5): 155-161.

[6] Lu Z X, Liu Z G, Mai H C, et al. Numerical prediction of strength for 3D braided composites. Journal of Beijing University of Aeronautics and Astronautics, 2002, 28(5): 563-565. (in Chinese) 卢子兴, 刘振国, 麦汉超, 等. 三维编织复合材料强度的数值预报. 北京航空航天大学学报, 2002, 28(5): 563-565.

[7] Xu K, Xu X W. Nonlinear numerical analysis of progressive damage of 3D braided composites. Chinese Journal of Theoretical and Applied Mechanics, 2007, 39(3): 398-406. (in Chinese) 徐焜, 许希武. 三维编织复合材料渐进损伤的非线性数值分析. 力学学报, 2007, 39(3): 398-406.

[8] Li J L, Yang H N, Kou C H. Fatigue properties of three dimensional braiding composites. Acta Materiae Compositae Sinica, 2005, 22(4): 172-176. (in Chinese) 李嘉禄, 杨红娜, 寇长河. 三维编织复合材料的疲劳性能. 复合材料学报, 2005, 22(4): 172-176.

[9] Xia B, Lu Z X. Finite element analysis on thermo-physical properties of 3D braided composites. Acta Aeronautica et Astronautica Sinica, 2011, 32(6): 1040-1049. (in Chinese) 夏彪, 卢子兴. 三维编织复合材料热物理性能的有限元分析. 航空学报, 2011, 32(6): 1040-1049.

[10] Li D S, Li J L, Chen L, et al. Studies on creep behavior of three dimensional braiding composites. Journal of Aeronautical Materials, 2006, 26(1): 76-80. (in Chinese) 李典森, 李嘉禄, 陈利, 等. 三维编织复合材料蠕变行为的试验研究. 航空材料学报, 2006, 26(1): 76-80.

[11] Lu Z X, Yang Z Y, Li Z P. Development of investigation into mechanical behaviour of three-dimensional braided composites. Acta Materiae Compositae Sinica, 2004, 21(2): 1-7. (in Chinese) 卢子兴, 杨振宇, 李仲平. 三维编织复合材料力学行为研究进展. 复合材料学报, 2004, 21(2): 1-7.

[12] Zhang M Z, Li H J, Li K Z. Progressing in the study on mechanical properties of the 3D braided composites. Journal of Materials Engineering, 2004(2): 44-48. (in Chinese) 张美忠, 李贺军, 李克智. 三维编织复合材料的力学性能研究现状. 材料工程, 2004(2): 44-48.

[13] Wang X M, Xing Y F. Developments in research on 3D braided composites. Acta Aeronautica et Astronautica Sinica, 2010, 31(5): 914-927. (in Chinese) 汪星明, 邢誉峰. 三维编织复合材料研究进展. 航空学报, 2010, 31(5): 914-927.

[14] Rangel-Nafaile C, Garcia-Rejon A. Long-term shears modulus of short fiber-reinforced polyester through the time-temperature superposeition principle. Composites, 1985, 16(3): 231-236.

[15] Bathgate R G, Wang C H, Pang F Y. Effects of temperature on the creep behavior of woven and stitched composites. Composites Strutures, 1997, 38(1/2/3/4): 435-445.

[16] Zhou G Q, Liu X M. The theory of viscoelasticity. Hefei: University of Science and Technology of China Press, 1996: 79-82. (in Chinese) 周光泉, 刘孝敏. 粘弹性理论. 合肥: 中国科学技术大学出版社, 1996: 79-82.

[17] Wei P J, Zhang S Y, Wu Y L. Correspondence principles and numerical methods of inverse integral transformation in viscoelastic mechanics. Advances in Mechanics, 1999, 29(3): 317-330. (in Chinese) 魏培君, 张双寅, 吴永礼. 粘弹性力学的对应原理及其数值反演方法. 力学进展, 1999, 29(3): 317-330.

[18] Yi Y M, Park S H, Youn S K. Asymptotic homogenization of viscoelastic composites with periodic microstructures. International Journal of Solids and Structures, 1998, 35(17): 2039-2055.

[19] Li D S, Lu Z X, Lin X M, et al. Finite element prediction of elastic properties of three dimensional and four directional braided composites. Journal of Beijing University of Aeronautics and Astronautics, 2006, 32(7): 828-832. (in Chinese) 李典森, 卢子兴, 蔺晓明, 等. 三维四向编织复合材料弹性性能的有限元预报. 北京航空航天大学学报, 2006, 32(7): 828-832.

[20] Xia Z H, Zhang Y F, Ellyin F. A unified periodical boundary conditions for representative volume elements of composites and applications. International Journal of Solids and Structures, 2003, 40(8): 1907-1921.

[21] Xia Z H, Zhou C W, Yong Q L, et al. On selection of repeated unit cell and application of unified periodic boundary conditions in micro-mechanical analysis of composites. International Journal of Solids and Structures, 2006, 43(2): 266-278.

[22] Zhou C W, Zhang Y X. Multiple scale viscoelastic anslysis of 3D woven composite materials. Acta Materiae Compositae Sinica, 2007, 24(5): 125-129. (in Chinese) 周储伟, 张音旋. 三维机织复合材料多尺度黏弹性分析. 复合材料学报, 2007, 24(5): 125-129.

[23] Chang C Y, Liu S T, Wang C G. Prediction of visco-elastic property of undirectional fiber reinforced composite materials. Chinese Journal of Computational Mechanics, 2006, 23(4): 414-418. (in Chinese) 常崇义, 刘书田, 王成国. 单向纤维复合材料粘弹性性能预测. 计算力学学报, 2006, 23(4): 414-418.

E-mail：hkxb@buaa.edu.cn

关于我们

期刊社服务

专业学科

封面文章

友情链接

主管单位：中国科学技术协会主办单位：中国航空学会北京航空航天大学

黏弹性树脂基三维编织复合材料的变温松弛模量

Relaxation Modulus of Viscoelastic Resin-based 3D Braided Composites Under Variable Temperatures

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	武智慧, 牛公杰, 钱建平, 刘荣忠. 基于热力学的HTPB/AP复合底排药损伤本构模型及损伤差异分析[J]. 航空学报, 2021, 42(3): 223855-223855.
[2]	顾志旭, 郑坚, 彭威, 支建庄. HTPB黏弹性微裂纹偏折扩展损伤本构模型[J]. 航空学报, 2018, 39(9): 222051-222059.
[3]	高涛, 漆文凯, 沈承. 基于一种新的均匀化实施方法的FRP刚度预测[J]. 航空学报, 2017, 38(5): 220579-220579.
[4]	邢誉峰, 陈磊. 若干周期性复合材料结构数学均匀化方法的计算精度[J]. 航空学报, 2015, 36(5): 1520-1529.
[5]	张超, 许希武, 严雪. 纺织复合材料细观力学分析的一般性周期性边界条件及其有限元实现[J]. 航空学报, 2013, 34(7): 1636-1645.
[6]	杨加明;张义长;吴丽娟. 多层黏弹性复合材料结构阻尼性能优化设计[J]. 航空学报, 2011, 32(2): 265-270.
[7]	汪星明;邢誉峰. 三维编织复合材料研究进展[J]. 航空学报, 2010, 31(5): 914-927.
[8]	周储伟. 三维机织复合材料细观黏弹性梁模型[J]. 航空学报, 2009, 30(2): 283-289.
[9]	孙士平;秦国华;张卫红. 多相多孔材料/结构的集成优化设计[J]. 航空学报, 2009, 30(1): 186-192.
[10]	王玮;杜星文. 预浸机织织物的本构关系[J]. 航空学报, 2008, 29(2): 472-477.
[11]	贺成红;张佐光;李玉彬;孙志杰. 高载下不同试样尺度复合材料的动态黏弹性[J]. 航空学报, 2007, 28(6): 1364-1368.
[12]	李恩奇;李道奎;唐国金;雷勇军. 基于传递函数方法的局部覆盖环状CLD圆柱壳动力学分析[J]. 航空学报, 2007, 28(6): 1487-1493.
[13]	邢誉峰;田金梅. 三维正交机织复合材料单胞特征单元及其应用[J]. 航空学报, 2007, 28(4): 881-885.
[14]	田金梅;邢誉峰. 一种新的三维四步编织复合材料几何模型及其在宏观弹性性能预测中的应用[J]. 航空学报, 2007, 28(1): 130-134.
[15]	张卫红;汪雷;孙士平. 基于导热性能的复合材料微结构拓扑优化设计[J]. 航空学报, 2006, 27(6): 1229-1233.