[1] 李成功, 傅恒志, 于翘, 等. 航空航天材料[M]. 北京: 国防工业出版社, 2002. Li Chenggong, Fu Hengzhi, Yu Qiao, et al. Aerospace materials [M]. Beijing: National Defense Industry Press, 2002. (in Chinese)[2] 柳木桐, 刘建华, 钟平. 超高强度钢耐腐蚀性能研究进展[J]. 科技导报, 2010, 28(9): 112-115. Liu Mutong, Liu Jianhua, Zhong Ping. Research development of corrosion resistance of ultra-high strength steel[J]. Science & Technology, 2010, 28(9): 112-115. (in Chinese)[3] 张滨岩. 化学成分对AerMet100钢组织和性能的影响. 昆明: 昆明理工大学机电工程学院, 2008. Zhang Binyan.The influence of chemical composition to the microstructure and performance of AerMet 100 steel. Kunming: Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, 2008.(in Chinese)[4] Wang L D, Jiang L Z, Zhu M, et al. Improvement of toughness of ultrahigh strength steel AerMet 100[J]. Journal of Materials Science & Technology, 2005, 21(5): 710-714.[5] 钟平. A-100超高强度钢的组织与性能//2001年中国钢铁年会论文集. 2001: 825-828. Zhong Ping. Microstructure and mechanical properties in A-100 ultrahigh strength steel //CSM 2001 Annual Meeting. 2001: 825-828. (in Chinese)[6] 赵振业. 超高强度钢中二次硬化现象研究[J]. 航空材料学报, 2002, 22(4): 46-55. Zhao Zhenye. Studing status on the secondary hardening phenomenon in ultra-high strength steels[J]. Journal of Aeronautical Materials, 2002, 22(4): 46-55. (in Chinese)[7] 张淑玉, 王春旭, 史庆南. 跳过深冷处理对A100钢断裂韧性的影响[J]. 特钢技术, 2006, 12(4): 8-10. Zhang Shuyu, Wang Chunxu, Shi Qingnan. Effect of DF-skipped treatment on fracture toughness of A100 alloy[J]. Special Steel Technology, 2006, 12(4): 8-10. (in Chinese)[8] 李志, 赵振业. AerMet100钢的研究与发展[J]. 航空材料学报, 2006, 26(3): 265-270. Li Zhi, Zhao Zhenye. Research and development of AerMet100 steel[J]. Journal of Aeronautical Materials, 2006, 26(3): 265-270. (in Chinese)[9] 李杰, 古立新, 李志, 等. AerMet100钢力学性能的回火温度敏感性研究[J]. 金属热处理, 2010, 35(3): 33-36. Li Jie, Gu Lixin, Li Zhi, et al. Tempering temperature sensitivity of mechanical properties for AerMet100 steel [J]. Heat Treatment of Metals, 2010, 35(3): 33-36. (in Chinese)[10] Novotny P M. An aging study of carpenter AerMet 100 alloy//Proceedings of Gilbert Speich Symposium on the Fundamentals of Aging and Tempering in Bainitic and Martensitic Steel Products. 1992: 237-247.[11] Yang H R, Lee K B, Kwon H. Effects of Ni additions and austenitizing temperature on secondary harding behavior in high Co-Ni steels[J]. Metallurgical and Materials Transactions A, 2001, 32(9): 2393-2396.[12] Speich G S. Innovation in ultrahigh-strength steel technology//Proceedings of the 34th Sagamore Army Material Research Conference. 1990.[13] 刘建华, 尚海波, 陶斌武, 等. 0Cr18Ni5和AF1410高强度钢的腐蚀行为研究[J]. 材料工程, 2004(8): 29-31. Liu Jianhua, Shang Haibo, Tao Binwu, et al. Corrosion behavior of high strength steels 0Cr18Ni5 and AF1410 [J]. Journals of Materials Engineering, 2004(8): 29-31. (in Chinese)[14] 郝雪龙, 刘建华, 李松梅, 等. 中性盐雾预腐蚀对AF1410高强度钢疲劳寿命的影响[J]. 航空材料学报, 2010, 30(1): 67-71. Hao Xuelong, Liu Jianhua, Li Songmei, et al. Effect of neutral salt spray precorrosion on fatigue life of AF1410 steel[J]. Journal of Aeronautical Materials, 2010, 30(1): 67-71. (in Chinese)[15] 金相图谱编写组. 金相图谱[M]. 北京: 电力工业出版社, 1980. Compling Group of Metallographic Map. Metallographic map[M]. Beijing: Electric Power Industry Press, 1980. (in Chinese)[16] 濮汝厚, 张伟, 赵振业. 超高强度钢300M含碳量、等温组织与力学行为的关系[J]. 航空材料学报, 1994, 14(3): 14-18. Pu Ruhou, Zhang Wei, Zhao Zhenye. The relationship between mechanical behavior and carbon content, isothermally transformed microstructure of 300M ultra-high strength steel[J]. Journal of Aeronautical Materials, 1994, 14(3): 14-18. (in Chinese) |