航空学报 > 2011, Vol. 32 Issue (6): 1147-1155   doi: CNKI:11-1929/V.20110107.1207.003

乙酸钴的掺杂对LY12铝合金表面溶胶凝胶膜层耐蚀性的影响

丁娇娇, 李松梅, 刘建华, 于美, 詹中伟   

  1. 北京航空航天大学 材料科学与工程学院, 航空材料与服役教育部重点实验室, 北京 100191
  • 收稿日期:2010-10-19 修回日期:2010-11-08 出版日期:2011-06-25 发布日期:2011-06-24
  • 通讯作者: Tel.: 010-82317103 E-mail: songmei_li@buaa.edu.cn E-mail:songmei_li@buaa.edu.cn
  • 作者简介:丁娇娇(1985- ) 女,硕士研究生。主要研究方向:腐蚀防护。 E-mail: dingjj1985@163.com 李松梅(1964- ) 女,博士,教授,博士生导师。主要研究方向:微生物腐蚀防护。 Tel: 010-82317103 E-mail: songmei_li@buaa.edu.cn刘建华(1957- ) 男,博士,教授,博士生导师。主要研究方向:表面处理与腐蚀防护。 E-mail: liujh@buaa.edu.cn于美(1980- ) 女,博士,副教授,硕士生导师。主要研究方向:腐蚀防护。 E-mail: yumei@buaa.edu.cn詹中伟(1982- ) 男,博士研究生。主要研究方向:表面处理。 E-mail: esparcher@yahoo.com.cn
  • 基金资助:

    国家自然科学基金 (51001007)

Cobaltous Acetate Doped Sol-gel Coatings for Corrosion Protection on Aluminium Alloy LY12

DING Jiaojiao, LI Songmei, LIU Jianhua, YU Mei, ZHAN Zhongwei   

  1. Key Laboratory of Aerospace Materials and Performance, Ministry of Education, School of Materials Science and Engineering, Beihang University, Beijing 100191, China
  • Received:2010-10-19 Revised:2010-11-08 Online:2011-06-25 Published:2011-06-24

摘要: 在LY12铝合金表面制备了防护性溶胶凝胶膜层,并研究了乙酸钴的掺杂对膜层耐蚀性能的影响。采用扫描电子显微镜(SEM)和电子能谱(EDS)分别观测溶胶凝胶膜层的微观结构和成分。采用电化学方法研究了乙酸钴浓度对溶胶膜层在浸泡实验中耐蚀性的影响;通过观察人为缺陷处在0.05 mol/L NaCl腐蚀溶液中形貌、成分的变化,对乙酸钴的缓蚀机理进行了探讨。研究表明,掺杂适量的乙酸钴不仅可以提高溶胶凝胶膜层的耐蚀性能,而且可以为受到破坏的溶胶凝胶膜提供缓蚀性能。然而相对高浓度的掺杂量则会降低膜层的稳定性,破坏溶胶凝胶膜层的腐蚀防护性能。

关键词: 乙酸钴, 溶胶凝胶膜, 耐蚀性能, 浸泡, 电化学阻抗谱

Abstract: The aim of this study is to investigate the effect of cobaltous acetate doping on the corrosion resistance of sol-gel coatings on aluminium alloy LY12. The morphology and chemical composition of the coatings are investigated respectively by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) are used to study the corrosion resistance mechanism of the coatings immersed in 0.05 mol/L NaCl solution. The results demonstrate that the doping of cobaltous acetate represented a remarkable improvement for the corrosion resistance of the coatings. In addition, the immersion test reveales that cobaltous acetate doping provided corrosion inhibition effect to the coatings. However, cobaltous acetate of relatively high concentration in sol-gel coatings might undermine both the stability and the corrosion resistance performance of the coatings after immersion.

Key words: cobaltous acetate, sol-gel coating, corrosion inhibition, immersion, electrochemical impedance spectroscopy

中图分类号: