[1] ORIFICI A C, THOMSON R S, DEGENHARDT R, et al. Degradation investigation in a postbuckling composite stiffened fuselage panel[J]. Composite Structures, 2008, 82(2):217-224.
[2] ANYFANTIS K N, TSOUVALIS N G. Post buckling progressive failure analysis of composite laminated stiffened panels[J]. Applied Composite Materials, 2012, 19(3-4):219-236.
[3] ORIFICI A C, ALBERDI I O D Z, THOMSON R S, et al. Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels[J]. Composites Science & Technology, 2008, 68(15-16):3150-3160.
[4] 刘璐, 关志东, 徐荣章, 等. 脱胶缺陷尺寸对复合材料加筋板屈曲及后屈曲特性的影响[J]. 复合材料学报, 2014, 31(3):749-758. LIU L, GUAN Z D, XU R Z, et al. Effects of debond size on buckling and post-buckling behaviors of composite stiffened panels[J]. Acta Materiae Compositae Sinica, 2014, 31(3):749-758(in Chinese).
[5] 刘从玉. 复合材料加筋板的屈曲后屈曲分析及承载能力研究[D]. 南京:南京航空航天大学, 2009:8-15. LIU C Y. Buckling, post-buckling and load-carrying capacity analysis of stiffened composite panels[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2009:8-15(in Chinese).
[6] AMBUR D R, JAUNKY N, HILBURGER M W, et al. Progressive failure studies of stiffened panels subjected to shear loading[J]. Composite Structures, 2004, 65(2):129-142.
[7] MALLELA U K, UPADHYAY A. Buckling of laminated composite stiffened panels subjected to in-plane shear:A parametric study[J]. Thin-Walled Structures, 2006, 44(3):354-361.
[8] ARBELO M A, ALMEIDA S F M D, DONADON M V. An experimental and numerical analysis for the post-buckling behavior of composite shear webs[J]. Composite Structures, 2011, 93(2):465-473.
[9] WANG W, GUO S, CHANG N, et al. Optimum buckling design of composite stiffened panels using ant colony algorithm[J]. Composite Structures, 2010, 92(3):712-719.
[10] FALZON B G, FAGGIANI A. The use of a genetic algorithm to improve the postbuckling strength of stiffened composite panels susceptible to secondary instabilities[J]. Composite Structures, 2012, 94(3):883-895.
[11] SOBIESZCZANSKI-SOBIESKI J, HAFTKA R T. Interdisciplinary and multilevel optimum design[M]//Computer Aided Optimal Design:Structural and Mechanical Systems. Berlin Heidelberg:Springer, 1987:655-701.
[12] LIU B, HAFTKA R T, AKGüN M A. Two-level composite wing structural optimization using response surfaces[J]. Structural & Multidisciplinary Optimization, 2000, 20(2):87-96.
[13] HANSEN L U, HORST P. Multilevel optimization in aircraft structural design evaluation[J]. Computers & Structures, 2008, 86(1):104-118.
[14] BACARREZA O, ALIABADI M H, APICELLA A. Robust design and optimization of composite stiffened panels in post-buckling[J]. Structural & Multidisciplinary Optimization, 2014, 51(2):409-422.
[15] JU S, SHENOI R A, JIANG D, et al. Multi-parameter optimization of lightweight composite triangular truss structure based on response surface methodology[J]. Composite Structures, 2013, 97(2):107-116.
[16] LANZI L, GIAVOTTO V. Post-buckling optimization of composite stiffened panels:Computations and experiments[J]. Composite structures, 2006, 73(2):208-220.
[17] MCKAY M D, BECKMAN R J, CONOVER W J. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J]. Technometrics, 2000, 42(1):55-61.
[18] CARRERE N, ROLLET Y, LEROY F, et al. Efficient structural computations with parameters uncertainty for composite applications[J]. Composites Science & Technology, 2009, 69(9):1328-1333.
[19] RIKARDS R, ABRAMOVICH H, KALNINS K, et al. Surrogate modeling in design optimization of stiffened composite shells[J]. Composite Structures, 2006, 73(2):244-251.
[20] 鲁大伟, 李书. 应用免疫遗传算法优化设计层合板铺层顺序[J]. 北京航空航天大学学报, 2005, 31(2):247-250. LU D W, LI S. Stacking sequence optimization of composite laminate applying genetic algorithm of immunity[J]. Journal of Beijing University of Aeronautics and Astronautics, 2005, 31(2):247-250(in Chinese).
[21] 罗志军, 乔新. 基于遗传算法的复合材料层压板固有频率的铺层顺序优化[J]. 复合材料学报, 1997, 14(4):114-118. LUO Z J, QIAO X. Optimization of ply stack sequence for natural frequencies of composite laminates by genetics algorithm[J]. Acta Materiae Compositae Sinica, 1997, 14(4):114-118(in Chinese).
[22] 唐文艳, 顾元宪, 赵国忠. 复合材料层合板铺层顺序优化遗传算法[J]. 大连理工大学学报, 2004, 44(2):186-189. TANG W Y, GU Y X, ZHAO G Z. Stacking-sequence optimization of composite laminate plates by genetic algorithm[J]. Journal of Dalian University of Technology, 2004, 44(2):186-189(in Chinese).
[23] 陈江华, 林爱文, 杨明, 等. 遗传算法求解TSP问题的研究进展[J]. 昆明理工大学学报(理工版), 2003, 28(4):9-13. CHEN J H, LIN A W, YANG M, et al. Review of genetic algorithms for travelling salesman problem[J]. Journal of Kunming University of Science and Technology (Science and Technology), 2003, 28(4):9-13(in Chinese).
[24] CHANG F K, LESSARD L B. Damage tolerance of laminated composites containing an open hole and subjected to compressive lodingd:Part I-Analysis[J]. Journal of Composite Materials, 1991, 25(1):2-43.
[25] 刘从玉, 许希武, 陈康. 考虑脱粘的复合材料加筋板屈曲后屈曲及承载能力数值分析[J]. 复合材料学报, 2010, 27(6):158-166. LIU C Y, XU X W, CHEN K, et al. Buckling, post-buckling and collapse analysis of stiffened composite panels with debonding damage[J]. Acta Materiae Compositae Sinica, 2010, 27(6):158-166(in Chinese).sign evaluation[J].Computers & Structures, 2008, 86(1):104-118 [13]Bacarreza O, H.Aliabadi M,Apicella ARobust design and optimization of composite stiffened panels in post-buckling[J].Structural & Multidisciplinary Optimization, 2014, 51(2):409-422 [14]Ju S, Shenoi R A, Jiang D, et al.Multi-parameter optimization of lightweight composite triangular truss structure based on response surface methodology[J].Composite Structures, 2013, 97(2):107-116 [15]Carrere N, Rollet Y, Leroy F -, et al.Efficient structural computations with parameters uncertainty for composite applications[J].Composites Science & Technology, 2009, 69(9):1328-1333 [16]D.Mckay M,JBeckman& W. J. Conover R. A comparison of three methods for selecting values of input variables in the analysis of output from a computer code[J].Technometrics, 2000, 42(1):55-61 [17]Rikards R, Abramovich H, Kalnins K, et al.Surrogate modeling in design optimization of stiffened composite shells[J].Composite Structures, 2006, 73(2):244-251 [18]鲁大伟, 李书.应用免疫遗传算法优化设计层合板铺层顺序[J].北京航空航天大学学报, 2005, 31(2):247-250 [19]罗志军, 乔新.基于遗传算法的复合材料层压板固有频率的铺层顺序优化[J].复合材料学报, 1997, 14(4):114-118 [20]唐文艳, 顾元宪, 赵国忠.复合材料层合板铺层顺序优化遗传算法[J].大连理工大学学报, 2004, 44(2):186-189 [21]陈江华, 林爱文, 杨明等.遗传算法求解问题的研究进展[J].昆明理工大学学报:理工版, 2003, 28(4):9-13 [22]刘从玉, 许希武, 陈康.考虑脱粘的复合材料加筋板屈曲后屈曲及承载能力数值分析[J].复合材料学报, 2010, 27(6):158-166 |