ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Design and manufacturing method of multi-scale integrated load bearing thin-walled structure for application in next-generation aeroengine based on advanced laser processing technology
Received date: 2023-12-28
Revised date: 2024-01-22
Accepted date: 2024-03-06
Online published: 2024-04-10
Supported by
Defense Industrial Technology Development Program(JCKY2022205B020);National Natural Science Foundation of China(12032018)
The multi-scale structure， composed of the macro skeleton， lattice and micro surface， represents a novel type of structure with potential for high performance， multifunctionality and lightweight design. Advanced laser processing technology not only enhances the manufacturing capacity of high-performance structures， but also provides possibilities for the manufacturing of new complex structures. After providing a brief overview of the current design and manufacturing techniques on macro skeleton， lattice and micro surface， this paper introduces a multi-scale structure design method for advanced laser processing technology. Taking the intermediate case of a turbine engine as an example， the main load-bearing skeleton is designed using topology optimization technology for additive manufacturing. The lightweight lattice design is carried out by filling manufacturable lattice in low-density areas in topology oiptimization or low-stress areas in the optimized model， resulting in a weight reduction of over 20% compared to the original design. Additionally， micro groove structures for drag reduction are designed on the surface of the airflow channel for ultrafast laser etching processing. Simulation results indicate that the micro grooves exhibit a drag reduction effect exceeding 10%. By exploring the multi-scale integrated structure design based on advanced laser processing technology， this study establishes a creative structural design procedure and offers a valuable approach for the development of next-generation aeroengine structures.
Shaoping ZHANG , Huiming GUO , Tong GAO , Weihong ZHANG . Design and manufacturing method of multi-scale integrated load bearing thin-walled structure for application in next-generation aeroengine based on advanced laser processing technology[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2024 , 45(13) : 630037 -630037 . DOI: 10.7527/S1000-6893.2024.30037
| 1 | 李其汉， 王延荣. 航空发动机结构强度设计问题［M］： 上海：上海交通大学出版社， 2014：12-25. |
| LI Q H， WANG Y R. The design problem of aero-engine strucuture strength［M］： Shanghai： Shanghai Jiao Tong University Press， 2014： 12-25 （in Chinese）. | |
| 2 | PRAKASH K S， NANCHARAIH T， RAO V V S. Additive manufacturing techniques in manufacturing -an overview［J］. Materials Today： Proceedings， 2018，5（2）： 3873-3882. |
| 3 | GAO W， ZHANG Y B， RAMANUJAN D， et al. The status， challenges， and future of additive manufacturing in engineering［J］. Computer-Aided Design， 2015，69： 65-89. |
| 4 | METEYER S， XU X， PERRY N， et al. Energy and material flow analysis of binder-jetting additive manufacturing processes［J］. Procedia CIRP， 2014， 15： 19-25. |
| 5 | MUELLER B. Additive manufacturing technologies-rapid prototyping to direct digital manufacturing［J］. Assembly Automation， 2012， 32：373-388. |
| 6 | IBHADODE O， ZHANG Z D， SIXT J， et al. Topology optimization for metal additive manufacturing： current trends， challenges， and future outlook［J］. Virtual and Physical Prototyping， 2023， 18（1）： 192-218. |
| 7 | TIAN X Y， WU L L， GU D D， et al. Roadmap for additive manufacturing： toward intellectualization and industrialization［J］. Chinese Journal of Mechanical Engineering： Additive Manufacturing Frontiers， 2022，1（1）： 10-14. |
| 8 | FERNáNDEZ E， COLLET M， ALARCóN P， et al. An aggregation strategy of maximum size constraints in density-based topology optimization［J］. Structural and Multidisciplinary Optimization， 2019， 60（5）： 30-42. |
| 9 | FERNANDERS F J， PAVANELLO R. Topology optimization of adhesive material in a single lap joint using an evolutionary structural optimization method and a cohesive zone model as failure criterion：［J］. Proceedings of the Institution of Mechanical Engineers， Part L： Journal of Materials： Design and Applications， 2022， 236（4）：757-778. |
| 10 | ALLAIRE G， GOURNAY F D， JOUVE F， et al. Structural optimization using topological and shape sensitivity via a level set method［J］. Control & Cybernetics， 2005， 34（1）： 59-80. |
| 11 | TAKAYUKI Y， NISHIWAKI S， IZUI K， et al. A structural optimization method incorporating level set boundary expressions based on the concept of the phase field method［J］.Transactions of the Japan Society of Mechanical Engineers Series A， 2009， 75（753）： 550-558. |
| 12 | ZHOU L， GAO T， ZHANG W H. Hole control methods in feature-driven topology optimization［J］. Computer Methods in Applied Mechanics and Engineering， 2023， 417： 16-44. |
| 13 | ZHANG W S， LI D， ZHANG J， et al. Minimum length scale control in structural topology optimization based on the Moving Morphable Components approach［J］. Computer Methods in Applied Mechanics and Engineering， 2016， 311： 327-355. |
| 14 | GUEST J K. Imposing maximum length scale in topology optimization［J］. Structural and Multidisciplinary Optimization， 2009， 37： 463-473. |
| 15 | YANG K K， FERNANDEZ E， NIU C， et al. Note on spatial gradient operators and gradient-based minimum length constraints in SIMP topology optimization［J］. Structural and Multidisciplinary Optimization， 2019，60（1）： 393-400. |
| 16 | ZHOU M D， LAZAROV B S， WANG F W， et al. Minimum length scale in topology optimization by geometric constraints［J］. Computer Methods in Applied Mechanics and Engineering， 2015， 293： 266-282. |
| 17 | SONG L L， ZHAO J， GAO T， et al. Length scale control in density-based multi-material topology optimization［J］. Computer Methods in Applied Mechanics and Engineering， 2022， 401： 1221-1225. |
| 18 | SONG L L， GAO T， WANG J， et al. Directional maximum length scale control in density-based topology optimization［J］. Computers & Structures， 2024，292： 107-136. |
| 19 | ZHOU L， SIGMUND O， ZHANG W H. Self-supporting structure design with feature-driven optimization approach for additive manufacturing［J］. Computer Methods in Applied Mechanics and Engineering， 2021，386： 1-29 |
| 20 | ZHANG W H， WANG C， ZHOU L， et al. Three-dimensional topology optimization considering overhang constraints with B-spline parameterization［J］. Computers & Structures， 2022， 269： 8-23. |
| 21 | PAUL R， ANAND S， GERNER F. Effect of thermal deformation on part errors in metal powder based additive manufacturing processes［J］. Journal of Manufacturing Science and Engineering， 2014， 136（3）： 31009. |
| 22 | SONG L L， GAO T， TANG L， et al. An all-movable rudder designed by thermo-elastic topology optimization and manufactured by additive manufacturing［J］. Computers & Structures， 2021， 243： 106405. |
| 23 | SHI G H， GUAN C Q， QUAN D L， et al. An aerospace bracket designed by thermo-elastic topology optimization and manufactured by additive manufacturing［J］. Chinese Journal of Aeronautics， 2020，33（4）： 1252-1261. |
| 24 | RIBEIRO T P， BERNARDO L F A， ANDRADE J M A. Topology optimisation in structural steel design for additive manufacturing［J］. Applied Sciences， 2021，11（5）： 2112. |
| 25 | 范华林， 杨卫. 轻质高强点阵材料及其力学性能研究进展［J］. 力学进展， 2007， 37（1）： 99-112. |
| FAN H L， YANG W. Development of lattice materials with high specific stiffiness and strength［J］. Advances in Mechanics， 2007， 37（1）： 99-112 （in Chinese）. | |
| 26 | 卢天健， 何德坪， 陈常青， 等. 超轻多孔金属材料的多功能特性及应用［J］. 力学进展， 2006， 36（4）： 517-535. |
| LU T J， HE D P， CHEN C Q， et al. The multi-functionality of ultra-light porous metals and their applications［J］. Advances in Mechanics， 2006， 36（4）： 517-535 （in Chinese）. | |
| 27 | CHEN Y， MAI Y W， YE L. Perspectives for multiphase mechanical metamaterials［J］. Materials Science and Engineering： Reports， 2023， 153： 100725. |
| 28 | LU C X， HSIEH M T， HUANG Z F， et al. Architectural design and additive manufacturing of mechanical metamaterials： A review［J］. Engineering， 2022， 17： 44-63. |
| 29 | SURJADI J U， GAO L B， DU H F， et al. Mechanical metamaterials and their engineering applications［J］. Advanced Engineering Materials， 2019， 21（3）： 1800864. |
| 30 | MENG L， SHI J X， YANG C， et al. An emerging class of hyperbolic lattice exhibiting tunable elastic properties and impact absorption through chiral twisting［J］. Extreme Mechanics Letters， 2020， 40： 100869. |
| 31 | AL-KETAN O， AL-RUB R K ABU. Multifunctional mechanical metamaterials based on triply periodic minimal surface lattices［J］. Advanced Engineering Materials. 2019， 21（10）： 1900524. |
| 32 | HAN L， CHE S A. An overview of materials with triply periodic minimal surfaces and related geometry： from biological structures to self-assembled systems［J］. Advanced Materials， 2018， 30（17）： 1705708. |
| 33 | WANG J H， CHEN K， ZENG M， et al. Assessment of flow and heat transfer of triply periodic minimal surface based heat exchangers［J］. Energy， 2023， 282： 128806. |
| 34 | LI W G， LI W H， YU Z B. Heat transfer enhancement of water-cooled triply periodic minimal surface heat exchangers［J］. Applied Thermal Engineering， 2022，217： 119198. |
| 35 | LI T T， CHEN Y Y， HU X Y， et al. Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties［J］. Materials & Design， 2018， 142： 247-258. |
| 36 | XIAO L， XU X， SONG W， et al. A multi-cell hybrid approach to elevate the energy absorption of micro-lattice materials［J］. Materials， 2020， 13（18）： 4083. |
| 37 | PAN C， HAN Y F， LU J P. Design and optimization of lattice structures： A review［J］. Applied Sciences， 2020，10（18）： 25-51. |
| 38 | 杜义贤， 李涵钊， 田启华， 等. 基于能量均匀化的高剪切强度周期性点阵结构拓扑优化［J］. 机械工程学报， 2017，53（18）： 152-160. |
| DU Y X， LI H Z， TIAN Q H， et al. Topology optimization of periodic lattice structure with high shear strength using energy-based homogenization ［J］. Journal of Mechanical Engineering， 2017， 53（18）：152-160 （in Chinese）. | |
| 39 | ZHANG W H， WANG F W， DAI G M， et al. Topology optimal design of material microstructures using strain energy-based method［J］. Chinese Journal of Aeronautics， 2007， 20（4）： 320-326. |
| 40 | BENDS?E M P， KIKUCHI N. Generating optimal topologies in structural design using a homogenization method［J］. Computer Methods in Applied Mechanics and Engineering， 1988， 71（2）： 197-224. |
| 41 | 张卫红，徐仕杰， 朱继宏. 循环对称结构的多尺度拓扑优化方法［J］. 计算力学学报， 2021， 38（4）： 512-522. |
| ZHANG W H， XU S J， ZHU J H. Multi-scale topology optimization method for cyclic symmetric structures［J］. Chinese Journal of Computational Mechanics， 2021， 38（4）：512-522 （in Chinese）. | |
| 42 | ALBERDI R， DINGREVILLE R， ROBBINS J， et al. Multi-morphology lattices lead to improved plastic energy absorption［J］. Materials & Design， 2020， 194： 1-10. |
| 43 | OZDEMIR Z， HERNANDEZ-NAVA E， TYAS A， et al. Energy absorption in lattice structures in dynamics： Experiments［J］. International Journal of Impact Engineering， 2016， 89： 49-61. |
| 44 | SAHARIAH B J， BAISHYA M J， NAMDEO A， et al. A novel strategy to design lattice structures with zero Poisson’s ratio［J］. Engineering Structures， 2023，288： 116214. |
| 45 | QIN Q， DAYYANI I， WEBB P. Structural mechanics of cylindrical fish-cell zero Poisson’s ratio metamaterials［J］. Composite Structures， 2022， 289： 115455. |
| 46 | XUE X， LIN C C， WU F， et al. Lattice structures with negative Poisson’s ratio： A review［J］. Materials Today Communications， 2023， 34： 105132. |
| 47 | CHEN Z Y， WANG Z， ZHOU S W， et al. Novel negative Poisson’s ratio lattice structures with enhanced stiffness and energy absorption capacity［J］. Materials， 2018，11（7）： 1095. |
| 48 | XU Z， ZHAO H F， WANG K. Design of hourglass-lattice metastructure with near-zero thermal expansion using structural optimization method［J］. Engineering Structures， 2023， 277： 115374. |
| 49 | LAKES R， LEHMAN J. Stiff， strong zero thermal expansion lattices via the Poisson effect［J］. Journal of Materials Research， 2013， 28（17）： 2499-2508. |
| 50 | WANG C， GU X J， ZHU J H， et al. Concurrent design of hierarchical structures with three-dimensional parameterized lattice microstructures for additive manufacturing［J］. Structural and Multidisciplinary Optimization， 2020，61（3）： 869-894. |
| 51 | GAO J， LUO Z， XIA L， et al. Concurrent topology optimization of multiscale composite structures in Matlab［J］. Structural and Multidisciplinary Optimization， 2019， 60（6）： 2621-2651. |
| 52 | LIU L， YAN J， CHENG G D. Optimum structure with homogeneous optimum truss-like material［J］. Computers & Structures， 2008， 86（13-14）： 1417-1425. |
| 53 | LI Y， GAO T， ZHOU Q Y， et al. Layout design of thin-walled structures with lattices and stiffeners using multi-material topology optimization［J］. Chinese Journal of Aeronautics， 2023， 36（4）： 496-509. |
| 54 | DALLAGO M， RAGHAVENDRA S， LUCHIN V， et al. Geometric assessment of lattice materials built via Selective Laser Melting［J］. Materials Today： Proceedings， 2019， 7： 353-361. |
| 55 | SING S L， WIRIA F E， YEONG W Y. Selective laser melting of lattice structures： A statistical approach to manufacturability and mechanical behavior［J］. Robotics and Computer-Integrated Manufacturing， 2018，49： 170-180. |
| 56 | PENG C X， TRAN P， NGUYEN-XUAN H， et al. Mechanical performance and fatigue life prediction of lattice structures： Parametric computational approach［J］. Composite Structures， 2020， 235： 111821. |
| 57 | ZARGARIAN A， ESFAHANIAN M， KADKHODAPOUR J， et al. Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures［J］. Materials Science and Engineering： C， 2016， 60： 339-347. |
| 58 | VIGLIOTTI A， PASINI D. Stiffness and strength of tridimensional periodic lattices［J］. Computer Methods in Applied Mechanics and Engineering， 2012， 229-232： 27-43. |
| 59 | SPAETH M， BARTHLOTT W. Lotus-Effect?： Biomimetic super-hydrophobic surfaces and their application［J］. Advances in Science and Technology， 2009， 60： 38-46. |
| 60 | LIU B， HE Y N， FAN Y， et al. Fabricating super‐hydrophobic lotus-leaf-like surfaces through soft-lithographic imprinting［J］. Macromolecular rapid communications， 2006，27（21）： 1859-1864. |
| 61 | FENG L， LI S H， LI Y S， et al. Super‐hydrophobic surfaces： from natural to artificial［J］. Advanced materials，2002， 14（24）： 1857-1860. |
| 62 | ZHANG D Y， LUO Y Y， XIANG L， et al. Numerical simulation and experimental study of drag-reducing surface of a real shark skin［J］. Journal of Hydrodynamics， Ser B， 2011， 23（2）： 204-211. |
| 63 | DEAN B， BHUSHAN B. Shark-skin surfaces for fluid-drag reduction in turbulent flow： A review［J］. Philosophical Transactions of the Royal Society A： Mathematical， Physical and Engineering Sciences， 2010， 368（1929）： 4775-4806. |
| 64 | VENDITTI J G. Turbulent flow and drag over fixed two‐and three‐dimensional dunes［J］. Journal of Geophysical Research： Earth Surface， 2007， 112（F4）： F04008. |
| 65 | 沈洪，任浩东， 李海东. 面向功能表面的激光仿生制造技术研究进展［J］. 空天防御， 2023， 6（12）： 12-22. |
| SHEN H， REN H D， LI H D. Research progress in laser biomimetic manufacturing technology for functional surfaces［J］. Aerospace Defense， 2023， 6（12）： 12-22 （in Chinese）. | |
| 66 | BIXLER G D， BHUSHAN B. Bioinspired micro/nanostructured surfaces for oil drag reduction in closed channel flow［J］. Soft Matter， 2013， 9（5）： 1620-1635. |
| 67 | 肖强， 徐睿. 超快激光制备材料表面微纳结构的研究进展［J］. 中国表面工程， 2020， 33（1）： 1-16. |
| XIAO Q， XU R. Research progress in surface microstructure of materials prepared by ultrafast laser［J］. China Surface Engineering， 2020， 33（1）： 1-16 （in Chinese）. | |
| 68 | 江国琛， 潘瑞， 陈昶昊， 等. 超快激光制备水面减阻微纳结构及其耐蚀性研究［J］. 中国激光， 2020， 47（8）： 73-81. |
| JIANG G C， PAN R， CHEN C H， et al. Preparation of water surface drag reducing Micro/Nano structures by ultrafast laser and their corrosion resistance research［J］. Chinese Journal of Lasers， 2020， 47（8）： 73-81 （in Chinese）. |
/
| 〈 |
|
〉 |
CJA