ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Novel small punch testing method and its application to conversion of mechanical properties for aerospace materials
Received date: 2023-03-16
Revised date: 2023-04-06
Accepted date: 2023-05-15
Online published: 2023-05-24
Supported by
National Natural Science Foundation of China(11872320)
For the small punch test with the advantage of slightly damaged sampling， a theoretical model was derived based on the energy density equivalence principle to describe the relationships among the load， displacement， geometric size， and uniaxial mechanical law parameters. A novel small punch test method was then proposed for aerospace materials to convert mechanical properties between uniaxial tensile test results and small punch test results. Small punch tests and uniaxial tensile tests were carried out on five aerospace materials. The results show that the stress-strain curves obtained by the new method were in close agreement with those obtained by uniaxial tensile tests； the relative errors of the elastic moduli obtained by the new method results and the uniaxial tensile test results were within 10%； and the relative errors of the yield strengths and tensile strengths obtained by the two methods were mostly within 5%. The proposed method is expected to promote the application of SPT for the safety evaluation of in-service structures.
Jitao LI , Guangzhao HAN , Jun XIONG , Tian ZHOU , Lixun CAI . Novel small punch testing method and its application to conversion of mechanical properties for aerospace materials[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2024 , 45(3) : 428708 -428708 . DOI: 10.7527/S1000-6893.2023.28708
| 1 | KLUEH R L. Miniature tensile test specimens for fusion reactor irradiation studies［J］. Nuclear Engineering and Design Fusion， 1985， 2（3）： 407-416. |
| 2 | FLORANDO J N， NIX W D. A microbeam bending method for studying stress-strain relations for metal thin films on silicon substrates［J］. Journal of the Mechanics and Physics of Solids， 2005， 53（3）： 619-638. |
| 3 | 董樑， 惠虎， 汤晓英. 基于微试样液压爆破法测试核压力容器用钢力学性能［J］. 原子能科学技术， 2015， 49（12）： 2227-2233. |
| DONG L， HUI H， TANG X Y. Mechanical property test of domestic A508 steel based on small bursting test［J］. Atomic Energy Science and Technology， 2015， 49（12）： 2227-2233 （in Chinese）. | |
| 4 | CHEN H， CAI L X. Unified ring-compression model for determining tensile properties of tubular materials［J］. Materials Today Communications， 2017， 13： 210-220. |
| 5 | KAZAKEVICIUTE J， ROUSE J P， DE FOCATIIS D S A， et al. The development of a novel technique for small ring specimen tensile testing［J］. Theoretical and Applied Fracture Mechanics， 2019， 99： 131-139. |
| 6 | MANAHAN M P. A new postirradiation mechanical behavior test—The miniaturized disk bend test［J］. Nuclear Technology， 1983， 63（2）： 295-315. |
| 7 | MAO X Y， TAKAHASHI H. Development of a further-miniaturized specimen of 3 mm diameter for tem disk （? 3 mm） small punch tests［J］. Journal of Nuclear Materials， 1987， 150（1）： 42-52. |
| 8 | 关凯书， 王志文， 徐彤， 等. 小冲杆试验方法标准化研究（二）： 材料室温拉伸性能的确定［J］. 压力容器， 2010， 27（8）： 40-46. |
| GUAN K S， WANG Z W， XU T， et al. Study on standardization of small punch test （2）—Tensile properties at room temperature［J］. Pressure Vessel Technology， 2010， 27（8）： 40-46 （in Chinese）. | |
| 9 | 韩浩， 王志文， 关凯书. 小冲杆试验技术测定金属材料强度性能［J］. 压力容器， 2004， 21（10）： 14-17. |
| HAN H， WANG Z W， GUAN K S. Toughness measurement of metal material by small punch test technology［J］. Pressure Vessel Technology， 2004， 21（10）： 14-17 （in Chinese）. | |
| 10 | CONTRERAS M A， RODRíGUEZ C， BELZUNCE F J， et al. Use of the small punch test to determine the ductile-to-brittle transition temperature of structural steels［J］. Fatigue & Fracture of Engineering Materials & Structures， 2008， 31（9）： 727-737. |
| 11 | GARCíA T E， RODRíGUEZ C， BELZUNCE F J， et al. Estimation of the mechanical properties of metallic materials by means of the small punch test［J］. Journal of Alloys and Compounds， 2014， 582： 708-717. |
| 12 | BRUCHHAUSEN M， HOLMSTR?M S， SIMONOVS? KI I， et al. Recent developments in small punch testing： Tensile properties and DBTT［J］. Theoretical and Applied Fracture Mechanics， 2016， 86： 2-10. |
| 13 | 张渊博， 关凯书， 王琼琦. 小冲杆试验摩擦力计算及抗拉强度公式改进［J］. 热加工工艺， 2019， 48（12）： 54-57. |
| ZHANG Y B， GUAN K S， WANG Q Q. Calculation of frictional force and improvement of tensile strength formula for small punch test［J］. Hot Working Technology， 2019， 48（12）： 54-57 （in Chinese）. | |
| 14 | 张赛飞， 雷龙宇， 杜明科， 等. 基于小冲杆试验的CB2耐热钢拉伸性能研究［J］. 热加工工艺， 2021， 50（24）： 28-31. |
| ZHANG S F， LEI L Y， DU M K， et al. Research on tensile properties of CB2 heat-resistant steel based on small punch test［J］. Hot Working Technology， 2021， 50（24）： 28-31 （in Chinese）. | |
| 15 | HUSAIN A， SEHGAL D K， PANDEY R K. An inverse finite element procedure for the determination of constitutive tensile behavior of materials using miniature specimen［J］. Computational Materials Science， 2004， 31（1-2）： 84-92. |
| 16 | CHEON J S， JOO C H. Small punch test for determining a flow stress by using a hybrid inverse procedure［J］. Computational Materials Science， 2008， 43（4）： 744-751. |
| 17 | ZHONG J R， XU T， WANG W L， et al. Use of database and small punch test to estimate true stress-plastic strain curve of steels［J］. International Journal of Pressure Vessels and Piping， 2021， 191： 104370. |
| 18 | RODRIGUEZ C， CABEZAS J G， CARDENAS E， et al. Mechanical properties characterization of heat-affected zone using the small punch test［J］. Welding Journal， 2009， 88（9）： 188-192. |
| 19 | FLEURY E， HA J S. Small punch tests to estimate the mechanical properties of steels for steam power plant： I. Mechanical strength［J］. International Journal of Pressure Vessels and Piping， 1998， 75（9）： 699-706. |
| 20 | SHIKALGAR T D， DUTTA B K， CHATTOPADHYAY J. Assessment of fracture resistance data using p-SPT specimens［J］. Theoretical and Applied Fracture Mechanics， 2018， 98： 167-177. |
| 21 | 乔建生， 钟巍华， 杨文. 基于小冲杆实验方法的国产A508-3钢辐照前后的断裂韧度测定［J］. 原子能科学技术， 2013， 47（7）： 1217-1221. |
| QIAO J S， ZHONG W H， YANG W. Fracture toughness measurement of domestic A508-3 steel using small punch test［J］. Atomic Energy Science and Technology， 2013， 47（7）： 1217-1221 （in Chinese）. | |
| 22 | 杨镇， 王志文. 小冲杆蠕变试验微试样的应变分析［J］. 化工机械， 2004， 31（2）： 82-86. |
| YANG Z， WANG Z W. Strain analysis of the miniature specimen in a small punch creep test［J］. Chemical Engineering & Machinery， 2004， 31（2）： 82-86 （in Chinese）. | |
| 23 | IZAKI T， KOBAYASHI T， KUSUMOTO J， et al. A creep life assessment method for boiler pipes using small punch creep test［J］. International Journal of Pressure Vessels and Piping， 2009， 86（9）： 637-642. |
| 24 | CHEN H， CAI L X. Unified elastoplastic model based on a strain energy equivalence principle［J］. Applied Mathematical Modelling， 2017， 52： 664-671. |
| 25 | CHEN H， CAI L X. An elastoplastic energy model for predicting the deformation behaviors of various structural components［J］. Applied Mathematical Modelling， 2019， 68： 405-421. |
| 26 | 张志杰， 蔡力勋， 陈辉， 等. 金属材料的强度与应力-应变关系的球压入测试方法［J］. 力学学报， 2019， 51（1）： 159-169. |
| ZHANG Z J， CAI L X， CHEN H， et al. Spherical indentation method to determine stress-strain relations and tensile strength of metallic materials［J］. Chinese Journal of Theoretical and Applied Mechanics， 2019， 51（1）： 159-169 （in Chinese）. | |
| 27 | BYUN T S， HONG J H， HAGGAG F M， et al. Measurement of through-the-thickness variations of mechanical properties in SA508 Gr.3 pressure vessel steels using ball indentation test technique［J］. International Journal of Pressure Vessels and Piping， 1997， 74（3）： 231-238. |
| 28 | 国家标准化管理委员会. 金属材料 拉伸试验 第1部分： 室温试验方法： ［S］. 北京： 中国标准出版社， 2021. |
| Standardization Administration of the People’s Republic of China. Metallic materials—Tensile testing—Part 1： Method of test at room temperature： ［S］. Beijing： Standards Press of China， 2021 （in Chinese）. |
/
| 〈 |
|
〉 |
CJA