Joint decision making for condition-based maintenance and spare parts ordering of components based on vibration monitoring

HE Yong; WANG Hong; LI Jing; QI Yankun

doi:10.7527/S1000-6893.2021.25304

ACTA AERONAUTICAET ASTRONAUTICA SINICA >

2022 , Vol. 43 >Issue 5: 225304 - 225304

DOI: https://doi.org/10.7527/S1000-6893.2021.25304

Solid Mechanics and Vehicle Conceptual Design

Joint decision making for condition-based maintenance and spare parts ordering of components based on vibration monitoring

HE Yong ,
WANG Hong ,
LI Jing ,
QI Yankun

Expand

School of Mechatronic Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China

Received date: 2021-01-21

Revised date: 2021-02-21

Online published: 2022-06-01

Supported by

National Natural Science Foundation of China (72061022); Natural Science Foundation of Gansu Province (20JR5RA401); Higher Education Institutions Innovation Found Project of Gansu Province (2021B-114); Education Department Excellent Postgraduate Innovation Project of Gansu Province (2021CXZX-544)

Fold

Abstract

The degradation feature of components based on vibration signals is easily affected by noise and therefore cannot accurately reflect their operation state. Considering both degradation features and fault features, we propose a condition-based maintenance model. A progressive fault feature identification method based on adaptive singular spectrum decomposition is first created, followed by the description of component reliability evolution by the proportional hazard model and the establishment of a joint maintenance model where the cumulative number of fault features is identified as the spare parts ordering threshold and the maintenance cost rate is used as the optimization objective. Finally, the accelerated life test data of a rolling bearing is used as an example to verify the effectiveness of the proposed method. The results show high diagnostic accuracy of adaptive singular spectrum decomposition for different signals, effectively reducing the number of manual diagnoses. The joint decision making method with the cumulative number of fault feature identification as the spare parts ordering threshold can compensate for the lack of uniqueness of the degradation feature thresholds and further obtain the optimal maintenance cost rate.

Key words： condition-based maintenance; spare parts ordering; fault feature; vibration monitoring; bearing; reliability analysis

Cite this article

HE Yong , WANG Hong , LI Jing , QI Yankun . Joint decision making for condition-based maintenance and spare parts ordering of components based on vibration monitoring[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022 , 43(5) : 225304 -225304 . DOI: 10.7527/S1000-6893.2021.25304

References

[1] OLDE KEIZER M C A, FLAPPER S D P, TEUNTER R H. Condition-based maintenance policies for systems with multiple dependent components:A review[J]. European Journal of Operational Research, 2017, 261(2):405-420.
[2] DE JONGE B, SCARF P A. A review on maintenance optimization[J]. European Journal of Operational Research, 2020, 285(3):805-824.
[3] ALASWAD S, XIANG Y S. A review on condition-based maintenance optimization models for stochastically deteriorating system[J]. Reliability Engineering & System Safety, 2017, 157:54-63.
[4] ZHU Q S, PENG H, TIMMERMANS B, et al. A condition-based maintenance model for a single component in a system with scheduled and unscheduled Downs[J]. International Journal of Production Economics, 2017, 193:365-380.
[5] POPPE J, BOUTE R N, LAMBRECHT M R. A hybrid condition-based maintenance policy for continuously monitored components with two degradation thresholds[J]. European Journal of Operational Research, 2018, 268(2):515-532.
[6] DO P, ASSAF R, SCARF P, et al. Modelling and application of condition-based maintenance for a two-component system with stochastic and economic dependencies[J]. Reliability Engineering & System Safety, 2019, 182:86-97.
[7] WANG J J, MAKIS V, ZHAO X. Optimal condition-based and age-based opportunistic maintenance policy for a two-unit series system[J]. Computers & Industrial Engineering, 2019, 134:1-10.
[8] YAHYATABAR A, NAJAFI A A. Condition based maintenance policy for series-parallel systems through proportional Hazards model:A multi-stage stochastic programming approach[J]. Computers & Industrial Engineering, 2018, 126:30-46.
[9] ZHENG R, CHEN B K, GU L D. Condition-based maintenance with dynamic thresholds for a system using the proportional hazards model[J]. Reliability Engineering & System Safety, 2020, 204:107123.
[10] LIU B, LIANG Z L, PARLIKAD A K, et al. Condition-based maintenance for systems with aging and cumulative damage based on proportional hazards model[J]. Reliability Engineering & System Safety, 2017, 168:200-209.
[11] 周亮, 李庆民, 彭英武, 等. 动态保障结构下多级多层备件配置优化建模[J]. 航空学报, 2017, 38(11):220822. ZHOU L, LI Q M, PENG Y W, et al. Optimization model for multi-level and multi-echelon spare part allocation in dynamic support structure[J]. Acta Aeronautica et Astronautica Sinica, 2017, 38(11):220822(in Chinese).
[12] 王蕴, 王乃超, 马麟, 等. 考虑备件约束的多部件串联系统使用可用度计算方法[J]. 航空学报, 2015, 36(4):1195-1201. WANG Y, WANG N C, MA L, et al. Operational availability calculation methods of various series systems under the constraint of spare parts[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(4):1195-1201(in Chinese).
[13] WANG J J, QIU Q G, WANG H H. Joint optimization of condition-based and age-based replacement policy and inventory policy for a two-unit series system[J]. Reliability Engineering & System Safety, 2021, 205:107251.
[14] OLDE KEIZER M C A, TEUNTER R H, VELDMAN J. Joint condition-based maintenance and inventory optimization for systems with multiple components[J]. European Journal of Operational Research, 2017, 257(1):209-222.
[15] QIU H, LEE J, LIN J, et al. Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics[J]. Journal of Sound and Vibration, 2006, 289(4-5):1066-1090.
[16] YE Z S, CHEN N, TSUI K L. A Bayesian approach to condition monitoring with imperfect inspections[J]. Quality and Reliability Engineering International, 2015, 31(3):513-522.
[17] HE K, MAILLART L M, PROKOPYEV O A. Scheduling preventive maintenance as a function of an imperfect inspection interval[J]. IEEE Transactions on Reliability, 2015, 64(3):983-997.
[18] BERRADE M D, SCARF P A, CAVALCANTE C A V, et al. Imperfect inspection and replacement of a system with a defective state:a cost and reliability analysis[J]. Reliability Engineering & System Safety, 2013, 120:80-87.
[19] WANG W B, WANG H Y. Preventive replacement for systems with condition monitoring and additional manual inspections[J]. European Journal of Operational Research, 2015, 247(2):459-471.
[20] 董鑫, 李国龙, 何坤, 等. 谱图小波阈值降噪及其在滚刀主轴振动信号分析中的应用[J]. 机械工程学报, 2020, 56(11):96-107. DONG X, LI G L, HE K, et al. Spectral graph wavelet threshold denoising and its application to vibration signal analysis for hob spindle[J]. Journal of Mechanical Engineering, 2020, 56(11):96-107(in Chinese).
[21] WANG Y, XU G H, LIANG L, et al. Detection of weak transient signals based on wavelet packet transform and manifold learning for rolling element bearing fault diagnosis[J]. Mechanical Systems and Signal Processing, 2015, 54-55:259-276.
[22] 郑近德, 潘海洋, 程军圣. 均值优化经验模态分解及其在转子故障诊断中的应用[J]. 机械工程学报, 2018, 54(23):93-101. ZHENG J D, PAN H Y, CHENG J S. Mean-optimized empirical mode decomposition and its application in rotor fault diagnosis[J]. Journal of Mechanical Engineering, 2018, 54(23):93-101(in Chinese).
[23] WU Z H, HUANG N. Ensemble empirical mode decomposition:A noise-assisted data analysis method[J]. Advance in Adaptive Data Analysis, 2009, 1(1):1-41.
[24] LI X, MA J, WANG X D, et al. An improved local mean decomposition method based on improved composite interpolation envelope and its application in bearing fault feature extraction[J]. ISA Transactions, 2020, 97:365-383.
[25] GILLES J. Empirical wavelet transform[J]. IEEE Transactions on Signal Processing, 2013, 61(16):3999-4010.
[26] XU Y G, DENG Y J, ZHAO J Y, et al. A novel rolling bearing fault diagnosis method based on empirical wavelet transform and spectral trend[J]. IEEE Transactions on Instrumentation and Measurement, 2020, 69(6):2891-2904.
[27] DRAGOMIRETSKIY K, ZOSSO D. Variational mode decomposition[J]. IEEE Transactions on Signal Processing, 2014, 62(3):531-544.
[28] BONIZZI P, KAREL J M H, MESTE O, et al. Singlar spectrum decomposition:A new method for time series decomposition[J]. Advance in Adaptive Data Analysis, 2014, 6(4):107-109.
[29] BARSZCZ T, JABLOŃSKI A. A novel method for the optimal band selection for vibration signal demodulation and comparison with the Kurtogram[J]. Mechanical Systems and Signal Processing, 2011, 25(1):431-451.
[30] QIAO Z J, PAN Z R. SVDprinciple analysis and fault diagnosis for bearings based on the correlation coefficient[J]. Measurement Science and Technology, 2015, 26(8):085014.
[31] ZHENG Z, LI X Z, ZHU Y. Feature extraction of the hydraulic pump fault based on improved Autogram[J]. Measurement, 2020, 163:107908.
[32] 王奉涛, 陈旭涛, 柳晨曦, 等. 基于KPCA和WPHM的滚动轴承可靠性评估与寿命预测[J]. 振动合测试与诊断, 2017, 37(3):476-483, 626. WANG F T, CHEN X T, LIU C X, et al. Rolling bearing reliability assessment and life prediction based on KPCA and WPHM[J]. Journal of Vibration, Measurement & Diagnosis, 2017, 37(3):476-483, 626(in Chinese).
[33] 陈保家, 邱光银, 肖文荣, 等. 航空发动机转子轴承运行可靠性评估方法[J]. 西安交通大学学报, 2018, 52(10):41-48. CHEN B J, QIU G Y, XIAO W R, et al. An evaluation method of operational reliability for aero-engine rotor bearings[J]. Journal of Xi'an Jiaotong University, 2018, 52(10):41-48(in Chinese).

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References