ACTA AERONAUTICAET ASTRONAUTICA SINICA >
A probabilistic evaluation model for configuration transformation ability of planar constrained metamorphic mechanisms
Received date: 2021-12-21
Revised date: 2022-01-10
Accepted date: 2022-03-18
Online published: 2022-04-12
Supported by
National Natural Science Foundation of China(51575091);Aeronautical Science Foundation of China(20170250001);the Fundamental Research Funds for the Central Universities(N2203010)
The definition and evaluation of configuration transformation ability as well as the principle of force control during the process of configuration transformation are the research foundation for realizing the stable configuration transformation of metamorphic mechanisms. Considering the randomness of input errors in practical application， the establishment of a probabilistic evaluation model of the configuration transformation ability is the theoretical basis for reducing failure probability of kinematic performance of metamorphic mechanisms. Based on the structure composition principle of the multiconfiguration source metamorphic mechanism that can operate in an under-actuated state， the modularized calculation models are established for force analysis of the augmented Assur groups including metamorphic joints. According to the equivalent resistance gradient model of metamorphic joints， a force analysis model is deduced to describe mechanical control principle of the configuration transformation of constrained metamorphic mechanisms. Furthermore， considering the uncertainties in the link dimensions， masses， and compliance parameters et al， a reliability evaluation method of the configuration transformation moment for the constrained metamorphic mechanism is established. Considering the influence of kinematic failure at the adjacent moment of configuration transformation time， an interval reliability calculation method for the configuration transformation of constrained metamorphic mechanisms is proposed by using the calculation model of system reliability. Finally， the feasibility and effectiveness of the probabilistic evaluation method is verified by taking the metamorphic mechanism of paper folding as an example. This research provides the foundation for the reliability optimization design of the constrained metamorphic mechanism aiming at obtaining the repeatability of the configuration transformation with high probability. It also shows theoretical and practical significance in promoting the application of metamorphic mechanisms.
Benqi SUN , Qiang YANG , Zhili SUN , Shujun LI , Hongkun MA , Ruonan WANG . A probabilistic evaluation model for configuration transformation ability of planar constrained metamorphic mechanisms[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2023 , 44(4) : 426843 -426843 . DOI: 10.7527/S1000-6893.2022.26843
| 1 | DAI J S， JONES J R. Mobility in metamorphic mechanisms of foldable/erectable kinds［J］. Journal of Mechanical Design， 1999， 121（3）： 375-382. |
| 2 | 李端玲， 戴建生， 张启先， 等. 基于构态变换的变胞机构结构综合［J］. 机械工程学报， 2002， 38（7）： 12-16. |
| LI D L， DAI J S， ZHANG Q X， et al. Structure synthesis of metamorphic mechanisms based on the configumtion transformations［J］. Journal of Mechanical Engineering， 2002， 38（7）： 12-16 （in Chinese）. | |
| 3 | 戴建生， 丁希仑， 邹慧君. 变胞原理和变胞机构类型［J］. 机械工程学报， 2005， 41（6）： 7-12. |
| DAI J S， DING X L， ZOU H J. Fundamentals and categorization of metamorphic mechanism［J］. Journal of Mechanical Engineering， 2005， 41（6）： 7-12 （in Chinese）. | |
| 4 | 王德伦， 戴建生. 变胞机构及其综合的理论基础［J］. 机械工程学报， 2007， 43（8）： 32-42. |
| WANG D L， DAI J S. Theoretical foundation of metamorphic mechanisms and its synthesis［J］. Journal of Mechanical Engineering， 2007， 43（8）： 32-42 （in Chinese）. | |
| 5 | GAN D M， DAI J S， LIAO Q Z. Mobility change in two types of metamorphic parallel mechanisms［J］. Journal of Mechanisms and Robotics， 2009， 1（11）： 041007. |
| 6 | LI S J， DAI J S. Structure synthesis of single—Driven metamorphic mechanisms based on the augmented Assur groups［J］. Journal of Mechanisms and Robotics， 2012， 4（3）： 031004. |
| 7 | LI S J， DAI J S. Advances in reconfigurable mechanisms and robotics Ⅰ［M］. Tianjin： Springer Press， 2012： 53-62. |
| 8 | 张武翔， 丁希仑， 戴建生. 基于约束变化特征分析的变胞机构构型综合方法［J］. 机械工程学报， 2013， 49（5）： 1-9. |
| ZHANG W X， DING X L， DAI J S. Method for configuration synthesis of metamorphic mechanisms based on constraint variation［J］. Journal of Mechanical Engineering， 2013， 49（5）： 1-9 （in Chinese）. | |
| 9 | 杨强， 王洪光， 李树军， 等. 含变胞运动副结构的约束变胞机构构型综合［J］. 机械工程学报， 2014， 50（13）： 1-8. |
| YANG Q， WANG H G， LI S J， et al. Type synthesis of constrained metamorphic mechanisms with structural forms of the metamorphic joints［J］. Journal of Mechanical Engineering， 2014， 50（13）： 1-8 （in Chinese）. | |
| 10 | LI S J， WANG H G， YANG Q. Constraint force analysis of metamorphic joints based on the augmented Assur groups［J］. Chinese Journal of Mechanical Engineering， 2015， 28（4）： 747-755. |
| 11 | YANG Q， HAO G B， LI S J， et al. Practical structural design approach of multicon guration planar single-loop metamorphic mechanism with a single actuator［J］. Chinese Journal of Mechanical Engineering， 2020， 33（5）： 29-43. |
| 12 | 王汝贵， 陈辉庆. 变胞机构多失效模式运动可靠性分析与优化［J］. 机械工程学报， 2021， 57（11）： 184-194. |
| WANG R G， CHEN H Q. Analysis and optimization on kinematic reliability of metamorphic mechanisms with multiple failure modes［J］. Journal of Mechanical Engineering， 2021， 57（11）： 184-194 （in Chinese）. | |
| 13 | 刘胜利， 王兴东， 孔建益， 等. 多源不确定性下平面变胞机构运动可靠性分析［J］. 机械工程学报， 2021， 57（17）： 64-75. |
| LIU S L， WANG X D， KONG J Y， et al. Kinematic reliability analysis of planar metamorphic mechanism with multi-source uncertainties［J］. Journal of Mechanical Engineering， 2021， 57（17）： 64-75 （in Chinese）. | |
| 14 | JOSHI S P， TIDWELL Z， CROSSLEY W A， et al. Comparison of morphing wing strategies based upon aircraft performance impacts［C］∥45th AIAA/ASME/ASCE/AHS/ASC Structures， Structural Dynamics and Materials Conference， 2004： 2348-2354. |
| 15 | 张克涛， 方跃法， 房海蓉. 基于变胞原理的一种探测车机构设计与分析［J］. 北京航空航天大学学报， 2007， 33（7）： 838-841. |
| ZHANG K T， FANG Y F， FANG H R. Design and analysis of a rover mechanism based on the metamorphic principle［J］. Journal of Beijing University of Aeronautics and Astronautics， 2007， 33（7）： 838-841 （in Chinese）. | |
| 16 | ZHANG W X， DING X L， DAI J S. Design and stability of operating mechanism for a spacecraft hatch ［J］. Chinese Journal of Aeronautics， 2009， 22（4）： 453-458. |
| 17 | TALEBI H A， PATEL R V， ASMER H. Neural network based dynamic modeling of flexible-link manipulators with application to the SSRMS［J］. Journal of Field Robotics， 2015， 17（7）： 385-401. |
| 18 | ZHAO C， GUO H W， LIU R Q， et al. Design and kinematic analysis of a 3RRlS metamorphic parallel mechanism for large-Scale reconfigurable space multifingered hand［J］. Journal of Mechanisms and Robotics， 2018， 10（4）： 041012. |
| 19 | 李波， 陆建兰， 黄利强， 等. 一种平面天线可折叠变胞机构的设计分析研究［J］. 西北工业大学学报， 2018， 36（S1）： 33-40. |
| LI B， LU J L， HUANG L Q， et al. Design and analysis of a foldable metamorphic mechanism with flat panel antennas［J］. Journal of Northwestern Polytechnical University， 2018， 36（S1）： 33-40 （in Chinese）. | |
| 20 | JIA G L， HUANG H L， LI B， et al. Synthesis of a novel type of metamorphic mechanism module for large scale deployable grasping manipulators［J］. Mechanism and Machine Theory， 2018， 128 （7）： 544-559. |
| 21 | 王珉， 王谢苗， 陈文亮， 等. 具有变胞功能的自主移动制孔机构［J］. 北京航空航天大学学报， 2015， 41（3）： 398-404. |
| WANG M， WANG X M， CHEN W L， et al. Autonomous mobile drilling mechanism with metamorphic function［J］. Journal of Beijing University of Aeronautics and Astronautics， 2015， 41（3）： 398-404 （in Chinese）. | |
| 22 | 樊伟， 郑联语， 王亚辉， 等. 管路组件可重构装配工装系统的定位器自动配置与性能分析［J］. 航空学报， 2018， 39（5）： 421793. |
| FAN W， ZHENG L Y， WANG Y H， et al. Automatic configuration and performance analysis of locators for reconfigurable assembly fixture system of pipeline components［J］. Acta Aeronautica et Astronautica Sinica， 2018， 39（5）： 421793 （in Chinese）. | |
| 23 | YANG Q， WANG H G， LI S J. Structural synthesis for broken strands repair operation metamorphic mechanism of EHV transmission lines［J］. Journal of Vibroengineering， 2014， 16（6）： 2768-2778. |
| 24 | 宋艳艳， 畅博彦， 金国光， 等. 变胞机构构态切换时的冲击问题分析与仿真研究［J］. 机械工程学报， 2020， 56（17）： 48-58. |
| SONG Y Y， CHANG B Y， JIN G G， et al. Analysis and simulation of impact problem of metamorphic mechanism considering configuration transformation［J］. Journal of Mechanical Engineering， 2020， 56（17）： 48-58 （in Chinese）. | |
| 25 | 张武翔， 丁希仑， 戴建生. 一种变自由度机构构态变换的稳定性［J］. 中南大学学报（自然科学版）， 2007， 38（S1）： 564-569. |
| ZHANG W X， DING X L， DAI J S. Stability of configuration transformation of a kind of variable freedom mechanism［J］. Journal of Central South University （Science and Technology）， 2007， 38（S1）： 564-569 （in Chinese）. | |
| 26 | RONG Y， ZHANG X C， QU M K. Unified inverse dynamics for a novel class of metamorphic parallel mechanisms［J］. Applied Mathematical Modelling， 2019， 74（8）： 280-300. |
| 27 | 于靖军， 刘凯， 孔宪文. 多模式机构研究进展［J］. 机械工程学报， 2020， 56（19）： 14-27. |
| YU J J， LIU K， KONG X W. State of the art of multi-mode mechanisms［J］. Journal of Mechanical Engineering， 2020， 56（19）： 14-27 （in Chinese）. | |
| 28 | SIMIONESCU P A. Kinematics of the RRR， RRT （passive） and RRRR， RRRT （active） linkage-mechanism building blocks with applications and reporting of new findings［J］. Journal of Mechanisms and Robotics， 2019， 11（6）： 1-24. |
| 29 | 谢里阳. 机械可靠性理论、方法及模型中若干问题评述［J］. 机械工程学报， 2014， 50（14）： 27-35. |
| XIE L Y. Issues and commentary on mechanical reliability theories， methods and models［J］. Journal of Mechanical Engineering， 2014， 50（14）： 27-35 （in Chinese）. | |
| 30 | 贾方， 陈胜军， 陈贺， 等. 平面连杆机构运动可靠性等效正态设计法［J］. 机械设计， 2010， 27（5）： 54-58. |
| JIA F， CHEN S J， CHEN H， et al. Equivalent normal design method for movement reliability of planar linkage mechanism［J］. Journal of Machine Design， 2010， 27（5）： 54-58 （in Chinese）. |
/
| 〈 |
|
〉 |
CJA