Measurement method of turbine blade film aperture based on infrared thermal imaging and shrinkage law

XIA Kailong; HE Qing; ZHANG Yusheng

doi:10.7527/S1000-6893.2021.26271

ACTA AERONAUTICAET ASTRONAUTICA SINICA >

2022 , Vol. 43 >Issue 12: 426271 - 426271

DOI: https://doi.org/10.7527/S1000-6893.2021.26271

Material Engineering and Mechanical Manufacturing

Measurement method of turbine blade film aperture based on infrared thermal imaging and shrinkage law

XIA Kailong ,
HE Qing ,
ZHANG Yusheng

Expand

1. Surface Engineering Research Institute, Chinese Academy of Agricultural Mechanization Sciences, Beijing 100083, China;
2. School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, China

Received date: 2021-08-24

Revised date: 2021-09-07

Online published: 2021-10-14

Supported by

National Science and Technology Major Project (2017-Ⅶ-0007-0100)

Fold

Abstract

The film cooling structure is one of the three key technologies for design and manufacturing of high-pressure turbine blades of gas turbine engines. Quality control of the structure is of great significance to ensure the cooling effect, operational performance and structural reliability of the turbine blade. Based on the basic principles of infrared thermal imaging non-destructive testing, a set of multi-degree-of-freedom detection platform for the blade air film hole was built. A method for measuring the aperture was proposed, in which pulsed hot/cold air is used as the excitation source, the thermal imager is used as the signal acquisition equipment, and the image processing technology is employed to measure the aperture. At the same time, considering the characteristics of the air film hole axis and the curvature of the blade body, the sine and dynamic cosine correction factors are set to optimize the hole measurement algorithm based on the Hough circle detection function. High precision aperture value was obtained, with the average difference from the standard plug gauge measurement result being less than 4.40%. The shrinkage law after applying thermal barrier coating was summarized. The result shows that the coating of the adhesive layer has little effect on the pore diameter of the air film, and the average shrinkage rate relative to the original pore diameter is less than 4.0%. The average shrinkage porosity after coating the ceramic layer is 16.2%.

Key words： infrared thermal imaging; film cooling hole; thermal barrier coatings; non-destructive testing; image processing

Cite this article

XIA Kailong , HE Qing , ZHANG Yusheng . Measurement method of turbine blade film aperture based on infrared thermal imaging and shrinkage law[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2022 , 43(12) : 426271 -426271 . DOI: 10.7527/S1000-6893.2021.26271

References

[1] 夏凯龙, 葛超, 王秋童, 等. 涡轮叶片冷却气膜孔及涂层缺陷检测技术研究进展[J]. 航空制造技术, 2022:65(13):92-104. XIA K L, GE C, WANG Q T, et al. Research progress of detection technology for film cooling holes and coating defects of turbine blades[J]. Aeronautical Manufacturing Technology, 2022:65(13):92-104(in Chinese).
[2] CUI J W, LI L, LI J Y, et al. Fiber probe for micro-hole measurement based on detection of returning light energy[J]. Sensors and Actuators A:Physical, 2013, 190:13-18.
[3] 崔继文, 谭久彬, 刘洋. 基于双光纤耦合的微深孔测量方法[J]. 红外与激光工程, 2009, 38(1):106-109. CUI J W, TAN J B, LIU Y. Measurement of micro-hole with high aspect ratio based on double optical fiber coupling[J]. Infrared and Laser Engineering, 2009, 38(1):106-109(in Chinese).
[4] SAJIMA T, MURAKAMI H, KATSUKI A, et al. Precision profile measurement system for microholes using vibrating optical fiber[J]. Sensors and Materials, 2012:387.
[5] SUN X, MA Y Z, YU Y X, et al. Inner hole diameter measuring based on capacitive sensor[J]. Advanced Materials Research, 2013, 739:596-601.
[6] STONE J, MURALIKRISHNAN B, SAHAY C. Geometric effects when measuring small holes with micro contact probes[J]. Journal of Research of the National Institute of Standards and Technology, 2011, 116(2):573-587.
[7] JIN J, KIM J W, KANG C S, et al. Precision depth measurement of through silicon vias (TSVs) on 3D semiconductor packaging process[J]. Optics Express, 2012, 20(5):5011-5016.
[8] RAMAMURTHY R, HARDING K G, LIAO Y, et al. Method and system for automated shaped cooling hole measurement:US20170132775[P]. 2017-05-11.
[9] LIN C H, POWELL R A, JIANG L, et al. Real-time depth measurement for micro-holes drilled by lasers[J]. Measurement Science and Technology, 2010, 21(2):025307.
[10] 关军, 王呈. 建立叶片气膜孔工件坐标系的方法研究[J]. 计测技术, 2013, 33(3):41-43. GUAN J, WANG C. Study on establishing coordinate system for workpiece of blade gas film holes[J]. Metrology & Measurement Technology, 2013, 33(3):41-43(in Chinese).
[11] 鲍晨兴, 王磊, 李凯, 等. 基于CCD的叶片气膜孔快速检测技术研究[J]. 航空精密制造技术, 2017, 53(2):52-55, 59. BAO C X, WANG L, LI K, et al. Research on rapid detection technology of gas film hole based on CCD[J]. Aviation Precision Manufacturing Technology, 2017, 53(2):52-55, 59(in Chinese).
[12] 毕超, 郝雪, 刘孟晨, 等. 气膜孔视觉测量中的坐标系建立与转换[J]. 传感技术学报, 2019, 32(10):1515-1521. BI C, HAO X, LIU M C, et al. Establishment and conversion of coordinate systems in vision measurement of film cooling holes[J]. Chinese Journal of Sensors and Actuators, 2019, 32(10):1515-1521(in Chinese).
[13] 毕超, 郝雪, 刘梅, 等. 气膜孔五轴视觉测量系统的设计与搭建[J]. 机床与液压, 2021, 49(17):123-127. BI C, HAO X, LIU M, et al. Design and establishment of five-axis vision measuring system for film cooling holes[J]. Machine Tool & Hydraulics, 2021, 49(17):123-127(in Chinese).
[14] 毕超, 张超, 樊楚一, 等. 气膜孔轴线方向的视觉测量技术研究[J]. 宇航计测技术, 2022, 42(4):37-42. BI C, ZHANG C, FAN C Y, et al. Study on vision measuring technology of axis direction of film cooling holes[J]. Journal of Astronautic Metrology and Measurement, 2022, 42(4):37-42(in Chinese).
[15] 廖涛, 董一巍, 张赛涛, 等. 基于虚拟测量的涡轮叶片气膜孔误差分析方法[J]. 航空科学技术, 2021, 32(4):50-59. LIAO T, DONG Y W, ZHANG S T, et al. Error analysis method of turbine blade film cooling hole based on virtual measurement[J]. Aeronautical Science & Technology, 2021, 32(4):50-59(in Chinese).
[16] 赵圆圆, 曾飞, 李洋, 等. 基于光场成像的快照式气膜孔三维测量技术[J]. 航空学报, 2021, 42(10):524158. ZHAO Y Y, ZENG F, LI Y, et al. 3D measurement technique for film cooling holes based on light-field imaging[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(10):524158(in Chinese).
[17] ELFURJANI S. Study on dimensional measurements based on rotating wire probe and acoustic emission touch sensing[D]. Victoria:University of Victoria, 2016.
[18] ELFURJANI S, KO J, JUN M B G. Micro-scale hole profile measurement using rotating wire probe and acoustic emission contact detection[J]. Measurement, 2016, 89:215-222.
[19] 隋鑫, 徐熙平, 孙健, 等. 应用多传感器技术测量微孔几何参量[J]. 光学与光电技术, 2009, 7(4):79-82. SUI X, XU X P, SUN J, et al. Microhole geometry measurement applying multi-sensor technology[J]. Optics & Optoelectronic Technology, 2009, 7(4):79-82(in Chinese).
[20] 何箐, 葛超, 王秋童. 高压涡轮工作叶片冷却气膜孔检测平台及测试方法:CN109751972A[P]. 2021-02-26. HE Q, GE C, WANG Q T. High pressure turbine working blade cooling film hole detecting platform and testing method:CN109751972A[P]. 2021-02-26(in Chinese).
[21] 唐庆菊. SiC涂层缺陷的脉冲红外热波无损检测关键技术研究[D]. 哈尔滨:哈尔滨工业大学, 2014. TANG Q J. Research on the key technology of SiC coating defects detection using pulsed infrared thermal wave non-destructive testing method[D]. Harbin:Harbin Institute of Technology, 2014(in Chinese).
[22] 李静, 陈桂芬, 丁小奇. 基于改进Canny算法的图像边缘检测方法研究[J]. 计算机仿真, 2021, 38(4):371-375. LI J, CHEN G F, DING X Q. Research on image edge detection method based on improved canny algorithm[J]. Computer Simulation, 2021, 38(4):371-375(in Chinese).
[23] 项学智. 复杂条件下的圆检测技术研究[D]. 哈尔滨:哈尔滨工程大学, 2005. XIANG X Z. Study of circle detection in complex condition[D]. Harbin:Harbin Engineering University, 2005(in Chinese).

Options

Outlines

模态框（Modal）标题

Abstract

Cite this article

References