Electronics and Electrical Engineering and Control

Optimization of space vector modulation strategy based on hybrid inverter

  • WANG Xiaolin ,
  • LIU Yuting ,
  • GU Cong ,
  • PENG Xuheng
Expand
  • College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China

Received date: 2020-08-27

  Revised date: 2020-09-25

  Online published: 2021-07-30

Supported by

Foundation Research Project of Jiangsu Province (BK20201297)

Abstract

The High-Speed Permanent Magnet Synchronous Motor (HSPMSM) drive system has two characteristics: small electromagnetic time constant, and low carrier frequency ratio of high-speed zone. These two non-ideal factors cause severe current ripple, which affects the efficiency, vibration noise and electromagnetic interference of the HSPMSM drive system. To suppress the current ripple, an improved low-loss space vector modulation algorithm is proposed based on a SiC-MOSFET/Si-IGBT hybrid inverter. The generation method of the zero voltage vector and the switching operation sequence are adjusted to transfer most switching actions to SiC-MOSFET and provide zero-voltage switching conditions for Si-IGBT. The switching loss of the inverter is then reduced, thereby improving the efficiency of the system and the available switching frequency. Improvement of the switching frequency effectively reduces current ripple. To further optimize the ripple performance, the ripple characteristics are analyzed. An optimal peak quadrature-axis current ripple modulation algorithm is proposed based on the variable switching frequency mode. The carrier frequency is adjusted in real time according to the predicted peak value of q-axis current ripple. The q-axis current ripple is averaged by means of peak load shifting, so as to disperse switching energy under the condition that the average switching frequency remains unchanged. The electromagnetic compatibility performance and vibration noise are improved. The proposed scheme has the advantages as follows: compared with the traditional inverter, the switching loss is reduced, the efficiency is improved and the switching frequency is increased to reduce the current ripple; compared with the traditional space vector modulation algorithm, the voltage vector generation method is improved. The carrier frequency is used to disperse the energy, and the peak value of the quadrature axis current ripple is reduced. Simulations and experiments executed on a HSPMSM verify the effectiveness of the proposed algorithm.

Cite this article

WANG Xiaolin , LIU Yuting , GU Cong , PENG Xuheng . Optimization of space vector modulation strategy based on hybrid inverter[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021 , 42(7) : 324673 -324673 . DOI: 10.7527/S1000-6893.2020.24673

References

[1] TENCONI A, VASCHETTO S, VIGLIANI A. Electrical machines for high-speed applications:Design considerations and tradeoffs[J]. IEEE Transactions on Industrial Electronics, 2014, 61(6):3022-3029.
[2] GU C, WANG X L, SHI X Q, et al. A PLL-based novel commutation correction strategy for a high-speed brushless DC motor sensorless drive system[J]. IEEE Transactions on Industrial Electronics, 2018, 65(5):3752-3762.
[3] OU J, LIU Y Z, LIANG D W, et al. Investigation of PM eddy current losses in surface-mounted PM motors caused by PWM[J]. IEEE Transactions on Power Electronics, 2019, 34(11):11253-11263.
[4] JIANG D, LI Q, SHEN Z W. Model predictive PWM for AC motor drives[J]. IET Electric Power Applications, 2017, 11(5):815-822.
[5] PARAMASIVAN M, PAULRAJ M M, BALASUBRAMANIAN S. Assorted carrier-variable frequency-random PWM scheme for voltage source inverter[J]. IET Power Electronics, 2017, 10(14):1993-2001.
[6] LEE K, SHEN G T, YAO W X, et al. Performance characterization of random pulse width modulation algorithms in industrial and commercial adjustable-speed drives[J]. IEEE Transactions on Industry Applications, 2017, 53(2):1078-1087.
[7] JIANG D, WANG F. Variable switching frequency PWM for three-phase converters based on current ripple prediction[J]. IEEE Transactions on Power Electronics, 2013, 28(11):4951-4961.
[8] LIU G, CHEN B D, WANG K, et al. Selective current harmonic suppression for high-speed PMSM based on high-precision harmonic detection method[J]. IEEE Transactions on Industrial Informatics, 2019, 15(6):3457-3468.
[9] 王堃, 游小杰, 王琛琛, 等. 低开关频率下SVPWM同步调制策略比较研究[J]. 中国电机工程学报, 2015, 35(16):4175-4183. WANG K, YOU X J, WANG C C, et al. Research on synchronized SVPWM strategies under low switching frequency[J]. Proceedings of the CSEE, 2015, 35(16):4175-4183(in Chinese).
[10] 周明磊, 刘伟志, 邱腾飞, 等. 适用于多模式脉宽调制的通用切换策略研究[J]. 中国电机工程学报, 2019, 39(7):2125-2133. ZHOU M L, LIU W Z, QIU T F, et al. A genaral switching strategy for multi-mode pulse width modulation[J]. Proceedings of the CSEE, 2019, 39(7):2125-2133(in Chinese).
[11] SOZER Y, TORREY D A, REVA S. New inverter output filter topology for PWM motor drives[J]. IEEE Transactions on Power Electronics, 2000, 15(6):1007-1017.
[12] DZHANKHOTOV V, PYRHÖNEN J. Passive LC filter design considerations for motor applications[J]. IEEE Transactions on Industrial Electronics, 2013, 60(10):4253-4259.
[13] MAISLINGER F, ERTL H, STOJCIC G, et al. Design of a 100 kHz wide bandgap inverter for motor applications with active damped sine wave filter[J]. The Journal of Engineering, 2019, 2019(17):3766-3771.
[14] SWAMY M M, KANG J K, SHIRABE K. Power loss, system efficiency, and leakage current comparison between Si IGBT VFD and SiC FET VFD with various filtering options[J]. IEEE Transactions on Industry Applications, 2015, 51(5):3858-3866.
[15] LIANG D L, LI J, QU R H, et al. Evaluation of high-speed permanent magnet synchronous machine drive with three-level and two-level inverter[C]//2015 IEEE International Electric Machines & Drives Conference (IEMDC). Piscataway:IEEE Press, 2015:1586-1592.
[16] ZWYSSIG C, ROUND S D, KOLAR J W. An ultrahigh-speed, low power electrical drive system[J]. IEEE Transactions on Industrial Electronics, 2008, 55(2):577-585.
[17] MADHUSOODHANAN S, MAINALI K, TRIPATHI A, et al. Medium voltage (≥ 2.3 kV) high frequency three-phase two-level converter design and demonstration using 10 kV SiC MOSFETs for high speed motor drive applications[C]//2016 IEEE Applied Power Electronics Conference and Exposition (APEC). Piscataway:IEEE Press, 2016:1497-1504.
[18] MIRZAEE H, DE A K, TRIPATHI A, et al. Design comparison of high-power medium-voltage converters based on a 6.5-kV Si-IGBT/Si-PiN diode, a 6.5-kV Si-IGBT/SiC-JBS diode, and a 10-kV SiC-MOSFET/SiC-JBS diode[J]. IEEE Transactions on Industry Applications, 2014, 50(4):2728-2740.
[19] NING P Q, YUAN T S, KANG Y H, et al. Review of Si IGBT and SiC MOSFET based on hybrid switch[J]. Chinese Journal of Electrical Engineering, 2019, 5(3):20-29.
[20] GU C, WANG X L, LIU Y T, et al. Design of a hybrid two-stage inverter and hybrid modulation strategy for high-speed permanent magnet synchronous motor drive[C]//IECON 2019-45th Annual Conference of the IEEE Industrial Electronics Society. Piscataway:IEEE Press, 2019:1004-1009.
[21] GU C, WANG X L, DENG Z Q. Evaluation of three improved space-vector-modulation strategies for the high-speed permanent magnet motor fed by a SiC/Si hybrid inverter[J]. IEEE Transactions on Power Electronics, 2021, 36(4):4399-4409.
Outlines

/