The effect of mass flow ratios different on the film cooling effectiveness of the enwall is studied using the Pressure-Sensitive Paint (PSP) technology and high-speed wind tunnel. The detailed distribution of the film cooling effectiveness on the endwall surface under different flow ratios of each cavity is obtained. The film cooling effectiveness on the endwall surface increases with the increase of the slot mass flow ratio. As the coolant injected into the slot increases, the coverage of the coolant on endwall surface becomes, cooling performance. As the coolant mass flow ratio of 2 increases, because the coolant from cooling holes liftoff from the wall surface to the excessively high speed. The influence of the mass flow ratio cavity 3 on the cooling effectiveness of the endwall is similar to that of cavity 2.
YANG Yuquan
,
LIU Cunliang
,
ZHANG Jie
,
HUANG Rong
. Effect of mass flow ratios on film cooling characteristics of endwall: Experimental study[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2021
, 42(7)
: 124399
-124399
.
DOI: 10.7527/S1000-6893.2020.24399
[1] BARIGOZZI G, BENZONI G, FRANCHINI G, et al. Fan-shaped hole effects on the aero-thermal performance of a film-cooled endwall[J]. Journal of Turbomachinery, 2006, 128(1):507-518.
[2] 刘存良, 朱惠人, 白江涛, 等. 基于瞬态液晶测量技术的收缩-扩张形孔气膜冷却特性[J]. 航空学报, 2009, 30(5):812-818. LIU C L, ZHU H R, BAI J T, et al. Film cooling characteristics of converging-expanding hole with transient liquid crystal measurement technique[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(5):812-818(in Chinese).
[3] RAVI B V, DESHPANDE S, RAMESH S, et al. Film cooling performance of tripod holes on the endwall upstream of a first stage nozzle guide vane[C]//ASME International Mechanical Engineering Congress & Exposition. New York:ASME,2015.
[4] 叶林,刘存良,杨寓全,等.V肋对尾缘劈缝气膜冷却特性影响的实验研究[J].航空学报, 2021, 42(4):124181. YE L, LIU C L, YANG Y Q, et al. Experimental study of the effect of v-shaped ribs on the film cooling characteristics for the trailing-edge cutback[J]. Acta Aeronautica et Astronautica Sinica, 2021, 42(4):124181(in Chinese).
[5] KOHLI A, BOGARD D G. Effects of very high free-stream turbulence on the jet-mainstream interaction in a film cooling flow[J]. Journal of Turbomachinery, 1998, 120(4):785-790.
[6] CHEN A F,SHIAU C C, HAN J C.Turbine blade platform film cooling with fan-shaped holes under simulated swirl purge flow and slashface leakage conditions:GT-2017-63119[R].New York:ASME, 2017.
[7] THRIFT A A, THOLE K A, HADA S. Effects of an axisymmetric contoured endwall on a nozzle guide vane:Adiabatic effectiveness measurements[J]. Journal of Turbomachinery, 2011,133(4):1617-1627.
[8] ZHANG L, YIN J, LIU K, et al. Effect of hole diameter on nozzle endwall film cooling and associated phantom cooling[C]//ASME Turbo Expo 2015:Turbine Technical Conference and Exposition. New York:ASME,2015.
[9] 张扬, 齐士博, 袁新. 涡轮流场影响端壁气膜冷却的实验研究[J]. 工程热物理学报, 2011, 32(6):941-944. ZHANG Y, QI S B, YUAN X.Experimental investigation on the turbine blade platform film cooling effected by the flow field[J]. Journal of Engineering Thermophysics, 2011, 32(6):941-944(in Chinese).
[10] SHIAU C C, CHEN A F, HAN J C, et al. Full-scale turbine vane endwall film-cooling effectiveness distribution using pressure-sensitive paint technique[J]. Journal of Turbomachinery,2016,138(5):051002.
[11] CHOWDHURY N H, SHIAU C C, HAN J C, et al. Film cooling effectiveness comparison on turbine vane endwall with cluster configurations using psp measurement technique[C]//ASME 2017 International Mechanical Engineering Congress and Exposition.New York:ASME,2017.
[12] LI M, LI X, REN J, et al. Overall cooling effectiveness characteristic and influence mechanism on an endwall with film cooling and impingement[C]//ASME Turbo Expo 2015:Turbine Technical Conference and Exposition. New York:ASME, 2015.
[13] ZHANG L J, JAISWAL R S. Turbine nozzle endwall film cooling study using pressure-sensitive paint[J]. Journal of Turbomachinery,2001,123(4):730-738.
[14] EL-GABRY L, XU H, LIU K, et al. Effect of coolant injection angle on nozzle endwall film cooling:Experimental and numerical analysis in linear cascade[C]//ASME Turbo Expo 2018:Turbomachinery Technical Conference and Exposition. New York:ASME, 2018.
[15] CHOWDHURY N H, SHIAU C C, HAN J C, et al. Turbine vane endwall film cooling with slashface leakage and discrete hole configuration[J]. Journal of Turbomachinery, 2017,139(6):1-13.
[16] CHOWDHURY N H, SHIAU C C, HAN J C, et al. Turbine vane endwall film cooling study from axial-row configuration with simulated upstream leakage flow[C]//ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. New York:ASME, 2017.
[17] ORNANO F, POVEY T. Experimental and computational study of the effect of momentum-flux ratio on high pressure ngv endwall cooling systems[C]//ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition. New York:ASME, 2017.
[18] KLINE S J, MCCLINTOCK F A. Describing uncertainties in single-sample experiments[J].Journal of Mechanical Engineering, 1953, 75:3-8.
[19] WRIGHT L M, MCCLAIN S T, CLEMENSON M D. Effect of density ratio on flat plate film cooling with shaped holes using PSP[C]//ASME Turbo Expo 2010:Power for Land, Sea, and Air. New York:ASME, 2010.
CJA