ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Experimental research on mechanical properties of 3D full 5-direactional braided composites lugs
Received date: 2015-08-17
Revised date: 2015-09-29
Online published: 2015-11-03
Supported by
Provincial/Ministerial Project Level
The mechanical properties of the 3D full 5-directional braided composites lugs on axial tension are studied based on experiments. The 3D braided composites lugs used for the study are made of T700-12K carbon fiber braided by 4-step braiding technique and solidified with TDE-85 epoxy by resin transfer molding (RTM) technique. The mechanical properties of the experimental samples which consist of two geometries and two methods for the holes (drilled and braided separately) are investigated. The results of these experiments show that the strength of the braided hole lug is six times that of the drilled one lug for the same size and same braiding technique. For the same hole diameter and thickness lug, with the increase of the width of the lug, the final failure load increases significantly, but the initial failure load improves a little.
Key words： D braiding; composite; lug; experimental research; mechanical properties
LIU Zhenguo , LIN Qiang , YA Jixuan , HU Long , WANG Yibo . Experimental research on mechanical properties of 3D full 5-direactional braided composites lugs[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016 , 37(7) : 2225 -2233 . DOI: 10.7527/S1000-6893.2015.0265
[1] 沃丁柱. 复合材料大全[M]. 北京:化学工业出版社, 2000:1-1280 WO D Z. Encyclopedia of composites[M]. Beijing:Chemical Industry Press, 2000:1-1280(in Chinese).
[2] 鞠苏, 曾竟成, 江大志, 等. 碳纤维增强复合材料接头研究进展[J]. 高科技纤维与应用, 2006(3):29-35. JU S, ZENG J C, JIANG D Z, et al. Study progress in carbon fiber reinforced composite joint[J]. Hi-Tech Fiber & Application, 2006(3):29-35(in Chinese).
[3] 程家林. 层压复合材料连接接头设计及其在大飞机中的应用[J]. 航空学报, 2008, 29(3):640-644. CHENG J L. Design of composite laminated joint and its application in large aircrafts[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(3):640-644(in Chinese).
[4] 章怡宁. 复合材料飞机结构设计[M]. 北京:航空工业出版社, 2002:1-273. ZHANG Y N. Aircraft structure design of composites[M]. Beijing:Aviation Industry Press, 2002:1-273(in Chinese).
[5] 史坚忠, 黄维杨. 复合材料承力接头设计的相关理论与应用概述[J]. 洪都科技, 1999(1):1-7. SHI J Z, HUANG W Y. A survey of related theory and application of bearing-load joints of composite material[J]. Hongdu Science and Technology, 1999(1):1-7(in Chinese).
[6] TAYLOR R M, OWENS S D. Correlation of an analysis tool for 3-D reinforced bonded joints on the F-35 joint strike fighter[C]//45th AIAA Structures, Structural Dynamics & Materials Conference. Reston:AIAA, 2004:1562.
[7] 鞠苏, 曾竟成, 江大志, 等. 复合材料桁架接头研究进展[J]. 材料导报, 2006, 20(12):28-31. JU S, ZENG J C, JIANG D Z, et al. Study progress in composite truss-joint[J]. Materials Review, 2006, 20(12):28-31(in Chinese).
[8] 夏英伟, 沃西源, 徐曼琼, 等. 先进复合材料桁架接头的研制与试验[J]. 航天返回与遥感, 2004, 25(3):49-54. XIA Y W, WO X Y, XU M Q, et al. Manufacture and experimentation of advanced composite material truss-joint[J]. Spacecraft Recovery & Remote Sensing, 2004, 25(3):49-54(in Chinese).
[9] 汪星明, 邢誉峰. 三维编织复合材料研究进展[J]. 航空学报, 2010, 31(5):914-927. WANG X M, XING Y F. Developments in research on 3D braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(5):914-927(in Chinese).
[10] 张美忠, 李贺军, 李克智. 三维编织复合材料矩形预制件仿真[J]. 航空学报, 2006, 27(5):985-988. ZHANG M Z, LI H J, LI K Z. Rectangle perform simulation for 3D braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(5):985-988(in Chinese).
[11] 徐焜, 许希武. 三维编织复合材料弹性性能数值预测及细观应力分析[J]. 复合材料学报, 2007, 24(3):178-185. XU K, XU X W. Prediction of elastic constants and simulation of stress field of 3D braided composites based on the finite element method[J]. Acta Materiae Compositae Sinica, 2007, 24(3):178-185(in Chinese).
[12] 夏彪, 卢子兴. 三维编织复合材料热物理性能的有限元分析[J]. 航空学报, 2011,32(6):1040-1049. XIA B, LU Z X. Finite element analysis on thermo-physical properties of 3D braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(6):1040-1049(in Chinese).
[13] 徐焜, 许希武, 田静. 小编织角三维编织复合材料拉伸强度模型[J]. 航空学报, 2007, 28(2):294-300. XU K, XU X W, TIAN J. A model for tensile strength prediction of low angel 3D braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(2):294-300(in Chinese).
[14] 刘振国, 冯志海. 三维四向编织复合材料弹性模量数值预报[J]. 北京航空航天大学学报, 2000, 26(2):182-185. LIU Z G, FENG Z H. Numerical prediction of moduli of 3D 4-directional braided composites[J]. Journal of Beijing University of Aeronautics and Astronautics, 2000, 26(2):182-185(in Chinese).
[15] 李典森, 卢子兴, 陈利, 等. 三维五向圆型编织复合材料细观分析及弹性性能预测[J]. 航空学报, 2007, 28(1):123-129. LI D S, LU Z X, CHEN L, et al. Microstructure analysis and prediction of the elastic properties of 3D 5-directional tubular braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(1):123-129(in Chinese).
[16] 李典森, 卢子兴, 卢文书. 三维四向编织复合材料刚度和强度的理论预测[J]. 应用数学和力学, 2008, 29(2):149-156. LI D S, LU Z X, LU W S. Theoretical prediction of stiffness and strength of 3D 4-directional braided composites[J]. Applied Mathematics and Mechanics, 2008, 29(2):149-156(in Chinese).
[17] 张超, 许希武, 毛春见. 三维编织复合材料渐进损伤模拟及强度预测[J]. 复合材料学报, 2011, 28(2):222-230. ZHANG C, XU X W, MAO C J. Progressive damage simulation and strength prediction of 3D braided composites[J]. Acta Materiae Compositae Sinica, 2011, 28(2):222-230(in Chinese).
[18] 陈利, 梁子青, 马振杰, 等. 三维五向编织复合材料纵向性能的实验研究[J]. 材料工程, 2005(8):3-6. CHEN L, LIANG Z Q, MA Z J, et al. Experimental investigation on longitudinal properties of 3D 5-directional braided composites[J]. Journal of Materials Engineering, 2005(8):3-6(in Chinese).
[19] 刘振国, 欧家骏, 胡龙, 等. 三维全五向编织预制件渗透率研究[J]. 航空学报, 2015, 36(7):2244-2250. LIU Z G, OU J J, HU L, et al. Research on the permeability of 3-D full 5-directional braided preforms[J]. Acta Aeronautica et Astronautica Sinica, 2015, 36(7):2244-2250(in Chinese).
[20] 郑锡涛, 孙秦, 柴亚南. 复合材料编织接头承载能力的试验研究[J]. 航空学报, 2007, 28(2):348-351. ZHENG X T, SUN Q, CHAI Y N. Failure load of load-bearing joints in 3D braided composites[J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(2):348-351(in Chinese).
[21] 郑锡涛, 卢智先, 柴亚南, 等. 三维多向编织复合材料承力接头破坏模态[J]. 机械科学与技术, 2007, 26(6):728-732. ZHENG X T, LU Z X, CHAI Y N, et al. Failure mode of load-bearing joints in 3D braided composites[J]. Mechanical Science and Technology for Aerospace Engineering, 2007, 26(6):728-732(in Chinese).
[22] 刘振国. 三维全五向编织预型件的概念[C]//China SAMPE'2008国际学术研讨会论文集, 2008. LIU Z G. Concept of 3D full 5-directional braided preforms[C]//China SAMPE'2008 Proceedings of the International Symposium, 2008(in Chinese).
[23] ZHANG F, LIU Z G, WU Z. A new scheme and microstructural model for 3D full 5-directional braided composites[J]. Chinese Journal of Aeronautics, 2010, 23(1):61-67.
[24] 张帆, 刘振国, 武哲. 三维全五向编织复合材料的细观结构分析[J]. 材料导报, 2012, 26(2):49-55. ZHANG F, LIU Z G, WU Z. Microstructure analysis of three-dimensional full 5-directional braided composites[J]. Materials Review, 2012, 26(2):49-55(in Chinese).
[25] JOHN E M, MARC A P. Standard test methods for textile composite:NASA CR 4747[R]. Washington, D.C.:NASA, 1996.
[26] ASTM. Standard method of test for bearing strength of plastics:ASTM D 953-02[S]//Annual Book of ASTM Standards:Vol.l8.01.West Conshohocken, PA:ASTM, 2002.
[27] 张文荣. 复合材料耳片接头承载能力试验[J]. 洪都科技, 2005(1):38-42. ZHANG W R. Test for load-bearing capacity of lug connector of composite material[J]. Hongdu Science and Technology, 2005(1):38-42(in Chinese).
/
| 〈 |
|
〉 |
CJA