ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Monte Carlo-based multiphysics coupling analysis method for focusing X-ray pulsar telescope
Received date: 2015-04-13
Revised date: 2015-06-17
Online published: 2015-06-29
Supported by
National Natural Science Foundation of China (51175019)
Focusing X-ray pulsar telescope (XPT) is a typical complex space optical payload, which involves optical, mechanical, electrical and thermal disciplines. The multiphysics coupling analysis plays an important role in improving the in-orbit performance of XPT. However, the conventional multiphysics coupling analysis (MCA) methods encounter two serious problems in dealing with the XTP. One is that the energy and reflectivity information of X-ray cannot be taken into consideration, which always misunderstands the essence of XPT. The other is that the coupling data cannot be transferred automatically among different disciplines, leading to computational inefficiency and thus increase the design cost. Therefore, a new multiphysics coupling analysis method for X-ray pulsar telescope is proposed based on the Monte Carlo and the full reflective theory. The main idea, procedures and operational steps of the proposed method are addressed in detail. Firstly, this method takes both the energy and reflectivity information of X-ray into consideration simultaneously and formulate the thermal-structural coupling equation and multiphysics coupling analysis model based on the finite element analysis (FEA) method. Then, all the thermal-structural, thermal and structural analysis under different working conditions have been implemented. Secondly, the mirror deformation can be obtained using construction geometry function. Meanwhile, the polynomial function is adopted to fit the deformed mirror and meanwhile evaluate the fitting error. Thirdly, the focusing performance analysis of XPT can be evaluated by the root mean square and maximum radius of dispersion spot employing the proposed method. Finally, a six-layer nested XPT is taken as an example to verify the proposed multiphysics coupling analysis method. The simulation results show that the thermal-structural coupling deformation is bigger than others; the influencing law of deformation effect on the focusing performance has been obtained. The focusing performances of thermal-structural, thermal, structural deformations have degraded by 30.01%, 14.35% and 7.85% respectively. The RMSs of dispersion spot are 2.914 3mm, 2.603 8 mm and 2.531 1 mm. As a result, the validity of the proposed method is verified through comparing the simulation results and experiments, which can be employed in the reliability-based design of XPT.
LI Liansheng , DENG Loulou , MEI Zhiwu , LYU Zhengxin , LIU Jihong , ZUO Fuchang . Monte Carlo-based multiphysics coupling analysis method for focusing X-ray pulsar telescope[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2016 , 37(4) : 1249 -1260 . DOI: 10.7527/S1000-6893.2015.0186
[1] SHEIKH S I, PINES D. Spacecraft navigation using X-ray pulsar[J]. Journal of Guidance, Control, and Dynamics, 2006, 29(1):49-63.
[2] 李鹏飞, 徐国栋, 董立珉, 等. X射线脉冲星信号时延的实时估计方法[J]. 航空学报, 2014, 35(7):1966-1976. LI P F, XU G D, DONG L M, et al. A real time estimation method of time-delay for X-ray pulsar signal[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(7):1966-1976(in Chinese).
[3] 崔平远, 徐瑞, 朱圣英, 等. 深空探测器自主技术发展现状与趋势[J]. 航空学报, 2014, 35(1):13-28. CUI P Y, XU R, ZHU S Y, et al. State of the art and development trends of on-board autonomy technology for deep space explorer[J]. Acta Aeronautica et Astronautica Sinica, 2014, 35(1):13-28(in Chinese).
[4] NERONOV A, BOYARSKY A, IAKUBOVSKYI D, et al. Potential of the large observatory for X-ray timing telescope for the search for dark matter[J]. Physical Review D, 2014, 90(12):123-132.
[5] PENACCHIONI A V, BRAGA J, CASTRO M A, et al. Telescope performance and image simulations of the balloon-borne coded-mask protoMIRAX experiment[J]. Journal of High Energy Astrophysics,[2015-04-13].http://dx.doi.org/10.1016/j.jheap.2015.01.001.
[6] IWASE T, MATSUMOTO H, KUNIEDA H, et al. Development of the next generation X-ray telescope using CFRP as a substrate[C]//Proceedings of Suzaku-MAXI 2014:Expanding the Frontiers of the X-ray Universe, 2014:160-161.
[7] BARBOUR S, ERWIN D A. Comparison of focal properties of square-channel and meridional lobster-eye lenses[J]. Journal of the Optical Society of America A, 2014, 31(12):2584-2592.
[8] GORENSTEIN P. Grazing incidence telescopes for X-ray astronomy[J]. Optical Engineering, 2012, 51(1):1-14.
[9] CARL B, MARK M, KEVIN K, et al. Structural-thermal-optical performance (STOP) sensitivity analysis for the jams webb space telescope[C]//Proceedings of SPIE, Optical Modeling and Performance Predictions Ⅱ, 2005:1-11.
[10] JORDAN E, CHAINYK M, HABBAL F, et al. Thermo/opto/mechanical analysis of large apertures for exoplanet detection using cielo[C]//Proceedings of SPIE, Techniques and Instrumentation for Detection of Exoplanets IV, 2009:1-6.
[11] JACOB M, MARCUS H, KENNETH G. Predicting performance of optical systems undergoing thermal/mechanical loadings using integrated thermal/structural/optical numerical methods[J]. Optical Engineering, 1981, 20(2):166-174.
[12] ALA T, SUBRAMANI S. Multiphysics coupled fluid/thermal/structural simulation for hypersonic reentry vehicles[J]. Journal of Aerospace Engineering, 2014, 25(2):273-281.
[13] ALEXANDER C, ALDA J, FRANCISCO J. Multiphysics simulation for the optimization of optical nanoantennas working as distributed bolometers in the infrared[J]. Journal of Nanophptonics, 2013, 7(1):1-15.
[14] JASON G, JEFF L, LESLIE P, et al. Collaborative design and analysis of electro-optical sensors[C]//Proceedings of SPIE, Optical Modeling and Performance Predictions IV, 2009:1-12.
[15] KEITARO I, AWAKI H, TATSURO K, et al. The thermal analysis of the hard X-ray telescope (HXT) and the investigation of the deformation of the mirror foil due to temperature change[C]//Proceedings of SPIE, Space Telescope and Instrumentation:Ultraviolet to Gamma Ray, 2010:1-13.
[16] HISAMITSU A, KEIJI O, TAKASHI O, et al. Design study of telescope housing for the NeXT/XRT[C]//Proceedings of SPIE, Space Telescope and Instrumentation:Ultraviolet to Gamma Ray, 2008:1-8.
[17] 贾志刚, 王荣桥, 胡殿印. 流固耦合在涡轮多学科设计优化中的应用[J]. 航空学报, 2013, 34(3):2777-2784. JIA Z G, WANG R Q, HU D Y. Application of fluid-solid coupling on multidisciplinary optimization design for turbine blades[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(3):2777-2784(in Chinese).
[18] 刘艳芳, 毛鸣翀, 徐向阳, 等. 液压电磁阀多物理场耦合热结构学分析[J]. 机械工程学报, 2014, 50(2):139-145. LIU Y F, MAO M C, XU X Y, et al. Multi-discipline coupled thermo-mechanics analysis of hydraulic solenoid valves[J]. Journal of Mechanical Engineering, 2014, 50(2):139-145(in Chinese).
[19] 周小红, 任晓明, 李柱, 等. 激光器光学系统光机热集成分析方法[J]. 强激光与粒子束, 2013, 25(11):2851-2855. ZHOU X H, REN X M, LI Z, et al. Thermal-structural-optical integrated analysis method of laser optical system[J]. High Power Laser and Particle Beams, 2013, 25(11):2851-2855(in Chinese).
[20] 赵源, 张殷富, 王洪伟. 某空间望远镜光机热集成分析[J]. 激光与红外, 2012, 42(4):404-407. ZHAO Y, ZHANG Y F, WANG H W. Integrated thermal-structural-optical analysis of a space telescope[J]. Laser & Infrared, 2012, 42(4):404-407(in Chinese).
[21] ZHANG J, WU Y, WU F. Thermal-structural-optical analysis for the lens of high-precision interferometer[C]//Proceedings of SPIE, 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies:Advanced Optical Manufacturing Technologies, 2012:1-6.
/
| 〈 |
|
〉 |
CJA