ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Airworthiness certification method for aeroengine on stall and surge with inlet distortion
Received date: 2014-09-22
Revised date: 2014-12-01
Online published: 2014-12-30
Aeroengine on stall and surge is an important part of airworthiness certification, and the development of airworthiness certification methods for civil engine on stall and surge is of great engineering value.Based on the basic requirement of the stall and surge of the aeroengine in the "Aero Engines Airworthiness Regulation", in view of the effect of inlet distortion on stall and surge and using the parallel compressor model, the common characteristics and the surge margin of an aeroengine are estimated and there is only a difference of less than 1.5% between the calculating results and experimental data. Then a three-dimensional numerical method is used to calculate the distortion of the flow field including a variety of conditions of changes in intake angle of attack and distortion range, and the change rule is summed up between the surge margin, inlet distortion and angle of attack, and the judgment method of limit attack of angle is developed. Finally, we develop a method of airworthiness certification for aeroengine on stall and surge by combining the relevant documents in China Civil Aviation Regulations.
LI Zhiping , WANG Mengqi . Airworthiness certification method for aeroengine on stall and surge with inlet distortion[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015 , 36(9) : 2947 -2957 . DOI: 10.7527/S1000-6893.2014.0329
[1] Guo J L, Bai K M, Jia L T. Research on airworthiness management system about military aircraft development[J]. Procedia Engineering, 2011, 17: 375-381.
[2] Haddon D R, Whittaker C J. Aircraft airworthiness certification standards for civil UAVs[J]. The Aeronautical Journal, 2003, 107(1068): 79-86.
[3] Heffley R K, Stapleford R L, Rumold R C. Airworthiness criteria development for powered-lift aircraft: A program summary, NASA CR-2791[R]. Washington, D.C.: NASA, 1977.
[4] Lu Z, Sun Y C, Zhou J. Airworthiness compliance approach procedure for civil aircraft[J]. Aeronautic Standardization & Quality, 2007(4): 6-8 (in Chinese). 陆中, 孙有朝, 周伽. 民用飞机适航符合性验证方法与程序研究[J]. 航空标准化与质量, 2007(4): 6-8.
[5] Pan C. Analysis on the continued airworthiness and MRO industry of China[J]. Aviation Maintenance & Engineering, 2013(3): 20-22 (in Chinese). 潘超. 中国持续适航与维修行业的现状分析[J]. 航空维修与工程, 2013(3): 20-22.
[6] Zhang Y M, Pu C B, Liu X H. Introduction to civil aircraft airworthiness management[J]. Civil Aircraft Design and Research, 2008(2): 37-42 (in Chinese). 张越梅, 浦传彬, 刘晓华. 浅谈民用飞机的适航管理[J]. 民用飞机设计与研究, 2008(2): 37-42.
[7] Wei B H, Wu K Q. Discussion on stall surging characteristic and its prevention measure[J]. Fluid Machinery, 2001, 29(6): 28-31 (in Chinese). 魏兵海, 吴克启. 风机失速喘振特性及其预防措施[J]. 流体机械, 2001, 29(6): 28-31.
[8] Leinhos D C, Schmid N R, Fottner L. The influence of transient inlet distortions on the instability inception of a low-pressure compressor in a turbofan engine[J]. Journal of Turbomachinery, 2001, 123(1): 1-8.
[9] Cai Y H, Wang P, Wang Z X, et al. Effect of pressure and temperature distortion on turbine engine stability[J]. Journal of Propulsion Technology, 2006, 27(3): 257-261 (in Chinese). 蔡元虎, 王鹏, 王占学, 等. 进气畸变对发动机压缩部件气动稳定性的影响[J]. 推进技术, 2006, 27(3): 257-261.
[10] Civil Aviation Administration of China. China's civil aviation regulations of 33[M]. Beijing: Civil Aviation Administration of China, 2002 (in Chinese). 中国民用航空局. 中国民用航空规章第 33部[M]. 北京: 中国民用航空局, 2002.
[11] Pearson H, McKenzie A B. Wakes in axial compressors[J]. Journal of the Royal Aeronautical Society, 1959, 63(583): 415-416.
[12] Cousins W T, Davis M W, Jr. Evaluating complex inlet distortion with a parallel compressor model: Part 1—Concepts, theory, extensions, and limitations[C]//ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. New York: ASME, 2011: 1-12.
[13] Davis M W, Jr, Cousins W T. Evaluating complex inlet distortion with a parallel compressor model: Part 2—Applications to complex patterns[C]//ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. New York: ASME, 2011: 13-23.
[14] Mazzawy R S. Multiple segment parallel compressor model for circumferential flow distortion[J]. Journal of Engineering for Power, 1977, 99(2): 288-296.
[15] Davis M W, Jr, Kidman D S. Prediction and analysis of inlet pressure and temperature distortion on engine operability from a recent T-38 flight test program[C]//ASME Turbo Expo 2010: Power for Land, Sea, and Air. New York: ASME, 2010:1-11.
[16] Burtscher M, Ratanaworabhan P. pFPC: A parallel compressor for floating-point data[C]//Data Compression Conference, 2009: 43-52.
[17] Song W Y, Li M, Fan F D. Multiple-sector parallel compressor model for flow field calculation under distortion[J].Journal of Aerospace Power, 1997, 12(2): 155-158 (in Chinese). 宋文艳, 黎明, 范非达. 多扇平行压气机模型在压气机稳态畸变流场计算中的应用[J]. 航空动力学报, 1997, 12(2): 155-158.
[18] Hu J. Aviation gas turbine engine stability design and evaluation of technology[M]. Beijing: Aviation Industry Press, 2004 (in Chinese). 胡骏. 航空燃气涡轮发动机稳定性设计与评定技术[M]. 北京: 航空工业出版社, 2004.
[19] Huang Q Y. Research on inlet distortion's effect on aero-engine using parallel compressor model[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010 (in Chinese). 黄求原. 某型发动机平行压气机畸变分析研究[D].南京: 南京航空航天大学, 2010.
[20] Wang X F. Turbofan engine dynamic nacelle design[J]. Journal of Civil Aircraft Design and Research, 1998(1): 84-126 (in Chinese). 王修方. 涡扇发动机动力短舱的设计[J].民用飞机设计与研究, 1998(1): 84-126.
/
〈 |
|
〉 |