ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Multidisciplinary dynamics modeling and analysis of a generic hypersonic vehicle
Received date: 2014-08-28
Revised date: 2014-09-26
Online published: 2014-09-29
Supported by
National Natural Science Foundation of China (11272262, 91216202)
Fluid-thermal-propulsive-structural coupling exists during the design of generic hypersonic vehicles. A two-dimensional air-breathing generic hypersonic flight vehicle model has been developed according to the design concept of hypersonic vehicle's integrated airframe/scramjet configuration, and aerodynamic model is derived from oblique-shock/Prandtl-Meyer theory and momentum theorem. A free beam model of variant cross-section and mass distribution is introduced as the structure of the vehicle, and the approach of Eckert's reference enthalpy is used to obtain temperature distribution as a function of time along the axial direction of the beam, above which the assumed modes method is used to obtain the natural frequencies and mode shapes of the structure during the consumption of fuel and aerodynamic heating. Flight dynamics equations coupled with aerothermoelasticity are finally presented. The results indicate that the structural characteristic is dominated by the mass variation over the aerodynamic heating, the effect of which is enhanced as the aerodynamic heating progresses. Results also indicate that trimmed states are changed by the effect of the flexible deflection especially at the beginning of flight process, and the aerodynamic heating enhances the effect of flexible deflection. The dynamic eigenvalues of linearized system show that both structural deflection and mass decrease adversely increase the instability of the short period and phugoid modes, while the altitude mode is slightly affected. Moreover, aerodynamic heating enhances the coupling between flight dynamics and aeroelasticity and decreases the stability of flexible modes.
HUA Ruhao , YE Zhengyin . Multidisciplinary dynamics modeling and analysis of a generic hypersonic vehicle[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015 , 36(1) : 346 -356 . DOI: 10.7527/S1000-6893.2014.0243
[1] Dana W. The X-15 airplane-lessons learned, AIAA-1993-0309[R]. Resten: AIAA, 1993.
[2] Spain C, Soistmann D, Parker E. et al. An overview of selected NASP aeroelastic studies at the NASA Langley research center, AIAA-1990-5218[R]. Reston: AIAA, 1990.
[3] Walkers S, Rodgers F. Falcon hypersonic technology overview, AIAA-2005-3253[R]. Reston: AIAA, 2005.
[4] Peebles C. The X-43 flight research program: lessons learned on the road to Mach 10[M]. Reston: AIAA Inc., 2007: 3-31.
[5] Yang C, Xu Y, Xie C C. Review of studies of aeroelastic of hypersonic vehicle[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(1): 1-11 (in Chinese). 杨超, 许赟, 谢长川. 高超声速飞行器气动弹性力学研究综述[J]. 航空学报, 2010, 31(1): 1-11.
[6] Tang S, Zhu Q J. Research progresses of flight dynamics modeling of airbreathing hypersonic flight vehicle[J]. Advances in Mechanics, 2011, 41(2): 187-200 (in Chinese). 唐硕, 祝强军. 吸气式高超声速飞行器动力学建模研究进展[J]. 力学进展, 2011, 41(2): 187-200.
[7] Chavez F R, Schmidt D K. An integrated analysis aeropropulsive/aeroelastic model for the dynamic analysis of hypersonic vehicles, AIAA-1992-4567[R]. Reston: AIAA, 1992.
[8] Schmidt D K. Dynamics and control of hypersonic aeropropulsive/aeroelastic vehicles, AIAA-1992-5326[R]. Reston: AIAA, 1992.
[9] Chavez F R, Schmidt D K. Analytical aeropropulsive/aeroelastic hypersonic-vehicle model with dynamic analysis[J]. Journal of Guidance, Control, and Dynamics, 1994, 17(6): 1308-1319.
[10] Bolender M A, Doman D B. Modeling unsteady heating effects on the structural dynamics of a hypersonic vehicle, AIAA-2006-6646[R]. Reston: AIAA, 2006.
[11] Bolender M A, Doman D B. A non-linear model for the longitudinal dynamics of a hypersonic air-breathing vehicle, AIAA-2005-6255[R]. Reston: AIAA, 2005.
[12] Li J L, Tang Q G, Feng Z W, et al. Modeling and analysis of a hypersonic vehicle with aeroelastic effect[J]. Journal of National University of Defense Technology, 2013, 35(1): 7-11 (in Chinese). 李建林, 唐乾刚, 丰志伟, 等.气动弹性影响下高超声速飞行器动力学建模与分析[J]. 国防科学技术大学学报, 2013, 35(1): 7-11.
[13] Fiorentini L. Nonlinear adaptive controller design for air-breathing hypersonic vehicles[D]. Ohio: The Ohio State University, 2010.
[14] Fidan B, Mirmirani M, Ioannou P. Flight dynamics and control of air-breathing hypersonic vehicles: review and new directions, AIAA-2003-7081[R]. Reston: AIAA, 2003.
[15] Thuruthimattam B J, Friedmann P P, McNamara J J, et al. Modeling approaches to hypersonic aerothermoelasticity with application to reusable launch vehicles, AIAA-2003-1967[R]. Reston: AIAA, 2003.
[16] Mirmirani M, Wu C, Clark A, et al. Modeling for control of a generic air-breathing hypersonic vehicle, AIAA-2005-6256[R]. Reston: AIAA, 2005.
[17] Stewart M, Suresh A, Liou M, et al. Multidisciplinary analysis of a hypersonic engine, AIAA-2002-5127[R]. Reston: AIAA, 2002.
[18] McNamara J J, Friedmann P P. Aeroelastic and aeroth-ermoelastic analysis of hypersonic vehicles: current status and future trends, AIAA-2007-2013[R]. Reston: AIAA, 2007.
[19] Williams T, Bolender M A. An aerothermal flexible mode analysis of a hypersonic vehicle, AIAA-2006-6647[R]. Reston: AIAA, 2006.
[20] Saad M A. Compressible fluid flow[M]. New Jersey: Prentice-hall INC, 1985: 295-304.
[21] Shih P K, Prunty J, Mueller R N. Thermostructural concepts for hypervelocity vehicles[J]. Journal of Aircraft, 1991, 28(5): 337-345.
[22] Sun J, Liu W Q. Analysis of sharp leading-edge thermal protection of high thermal conductivity materials[J]. Acta Aeronautica et Astronautica Sinica, 2011, 32(9): 1622-1628 (in Chinese). 孙健, 刘伟强. 尖化前缘高导热材料防热分析[J]. 航空学报, 2011, 32(9): 1622-1628.
[23] Eckert E R G. Engineering relations for heat transfer and friction in high-velocity laminar and turbulent boundary-layer flow over surfaces with constant pressure and temperature[J]. Transactions of the ASME, 1956,78(6): 1273-1283.
[24] Sachs G. Longitudinal long-term modes in super-hypersonic flight[J]. Journal of Guidance, Control, and Dynamics, 2005, 28(3): 539-541.
/
| 〈 |
|
〉 |
CJA