ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Erosion wear characteristic of jet pipe servo valve
Received date: 2014-05-07
Revised date: 2014-07-14
Online published: 2014-09-17
The jet pipe servo valve is a kind of typical two-stage flow control electro-hydraulic servo valve; the flow field of the nozzle to the receiver parts is the most complex part, which can produce erosion wear because of the pollution of hydraulic medium. Taking the jet pipe servo valve as the research object, combining the theory of computational fluid dynamics(CFD) with the erosion wear theory, applying Reynolds averaged Navier-Stokes equations, the standard k-ε two-equation model (liquid phase), discrete phase model (DPM)(solid phase) and the erosion wear model of plastic material, through the fluid dynamics software FLUENT, we establish a visual simulation model of the nozzle to the receiver parts of the jet pipe servo valve, conducte the erosion wear rate of the numerical simulation and calculate the theoretical life in this paper. The research results demonstrate that the erosion wear of the solid particle in the hydraulic medium to the jet pipe servo valve is mainly focused on the middle inwall area between the left and right receiving holes, the maximum wear rate decreases with the increase of the offset of the nozzle and the trend of left and right sides is symmetrical. The methods and results have provided an important reference for failure's qualitative analysis and forecast and theoretical life's quantitative calculation of the jet pipe servo valve.
CHU Yuanbo , YUAN Zhaohui , ZHANG Ying . Erosion wear characteristic of jet pipe servo valve[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2015 , 36(5) : 1548 -1555 . DOI: 10.7527/S1000-6893.2014.0137
[1] Huang Z, Hou B G, Fang Q, et al. Comparison of electro-hydraulic servo valves between jet-pipe type and nozzle-flapper type[J]. Fluid Power Transmission and Control, 2007, 23(4): 43-45 (in Chinese). 黄增, 候保国, 方群, 等. 射流管式和喷嘴挡板式电液伺服阀之比较[J]. 流体传动与控制, 2007, 23(4): 43-45.
[2] Yin Y B. Analysis of foreign patents of jet-pipe servo valve[J]. Hydraulics Pneumatics & Seals, 2012(2): 68-73 (in Chinese). 訚耀保. 射流管伺服阀欧美专利分析[J]. 液压气动与密封, 2012(2): 68-73.
[3] Fang Q, Huang Z. Development process, research situation and trend of the electro hydraulic servo valve[C]//Proceedings of 704 Research Institute Electro Hydraulic Servo Valve Partment of China Shipbuilding Industry Corporation in 2008, 2008: 1-8 (in Chinese). 方群, 黄增. 电液伺服阀的发展过程、研究现状和趋势[C]//中船重工集团七〇四所电液伺服阀产业部二〇〇八年度论文集, 2008: 1-8.
[4] Wang F J. Computational fluid dynamics analysis[M]. Beijing: Tsinghua University Press, 2008 (in Chinese). 王福军. 计算流体动力学分析[M]. 北京: 清华大学出版社, 2008.
[5] Finnie I. Erosion of surfaces by solid particles[J]. Wear, 1960, 3(4): 87-103.
[6] Bitter J G. A study of erosion phenomena[J]. Wear, 1963, 6(3): 5-21.
[7] Levy A V. The erosion of structure alloys, ceramets and in situ oxide scales on steels[J]. Wear, 1988, 127(2): 31-52.
[8] Edwards J k, Mclaury B S, Shirazi S A. Evaluation of alternative pipe bend fittings in erosion service[C]//Proceedings of the 2000 ASME Fluids Engineering Division Summer Meeting, 2000: 959-966.
[9] Wang Y. Establishment and analysis on a jet pipe servo valve mathematical model[D]. Lanzhou: Lanzhou University of Technology, 2012 (in Chinese). 王洋. 射流管伺服阀数学模型建立与分析[D]. 兰州: 兰州理工大学, 2012.
[10] Zhao X X. Research on the erosion mechanism of cyclone separator's wall caused by gas-solid two-phase flow[D]. Beijing: China University of Petroleum, 2010 (in Chinese). 赵新学. 气固两相流对旋风分离器壁面磨损机理的研究[D]. 北京: 中国石油大学, 2010.
[11] Forder A, Thew M, Harrison D. A numerical investigation of solid particle erosion experienced within oilfield control valves[J]. Wear, 1998, 216(5): 184-193.
[12] Grant G, Tabakoff W. Erosion prediction in turbomachinery resulting from environmental solid particles[J]. Journal of Aircraft, 1975, 12(5): 471-478.
[13] Zhang K, Yao J Y, Jiang T M. Degradation assessment and life prediction of electro-hydraulic servo valve under erosion wear[J]. Engineering Failure Analysis, 2014, 36: 284-300.
[14] Zhang H, Xiong S B, Liang Y W, et al. Analyses of erosion wear characteristic and structure research on hydraulic valve[J]. Journal of China Coal Society, 2008, 33(2): 214-217 (in Chinese). 张宏, 熊诗波, 梁义维, 等. 液压阀冲蚀磨损特性分析与结构探讨[J]. 煤炭学报, 2008, 33(2): 214-217.
[15] Wen D C. Erosion and wear behavior of nitrocarburized DC53 tool steel[J]. Wear, 2010, 268(3-4): 629-636.
[16] ASTM. G73-93 Liquid impingement erosion test[S]. Philadelphia: ASTM, 1993.
[17] ASTM. G76-95 Conducting erosion test by solid particle impingement using gas jets[S]. Philadelphia: ASTM, 1995.
[18] Zhang M Y, Fang Q, Jin Y L. Application of jet pipe servo valve in aerospace[C]//Proceedings of the Fifth National Fluid Transmission and Control Conference and the Hydraulic and Pneumatic Academic Conference in 2008 Academic Conference, 2008: 16-20 (in Chinese). 章敏莹, 方群, 金瑶兰. 射流管伺服阀在航空航天领域的应用[C]//第五届全国流体传动与控制学术会议暨2008年中国航空学会液压与气动学术会议论文集, 2008: 16-20.
/
| 〈 |
|
〉 |
CJA