[1] Zhao J X. Development and prospect of carbon fibers in the world[J]. Advanced Materials Industry, 2012(8): 13-16. (in Chinese) 赵稼祥. 世界碳纤维发展及前景[J]. 新材料产业, 2012(8): 13-16.
[2] Zhao Y, Duan Y X, Xiao H. Study on the surface properties of carbon fibers affected by sizing agent[J]. Journal of Materials Engineering, 2007(增刊1): 121-126.(in Chinese) 肇研, 段跃新, 肖何. 上浆剂对碳纤维表面性能的影响[J]. 材料工程, 2007(Suppl.1): 121-126.
[3] Yang Z, Zhao Y, Chen D, et al. Characterization of carbon fiber surface and analysis its effect on interfacial property of the composite[C]//17th National Conference on Composite Materials. Beijing: Beijing Zhonghang Era Culture Communication Co. Ltd., 2012: 1090-1094.(in Chinese) 杨喆, 肇研, 陈达, 等. 国产碳纤维表面特性分析及其对复合材料微观界面性能的影响[C]//第17届全国复合材料学术会议论文集. 北京: 北京中航时代文化传播有限公司, 2012: 1090-1094.
[4] Zhang L J, Zhao Y, Luo Y F, et al. On the interfacial properties of CCF300/QY8911 composite with cyclical hygrothermal treatments[J]. Journal of Materials Engineering, 2012(2): 25-49.(in Chinese) 张利军, 肇研, 罗云烽, 等. 湿热循环对CCF300/QY8911复合材料界面性能的影响[J]. 材料工程, 2012(2): 25-49.
[5] Feng T B, Zhao Y, Luo Y F, et al. Hygrothermal property of CCF/BMI composites with different sizing on the carbon fiber[J]. Journal of Materials Engineering, 2009(10): 36-40.(in Chinese) 封彤波, 肇研, 罗云烽, 等. 不同上浆剂的国产碳纤维复合材料湿热性能研究[J]. 材料工程, 2009(10): 36-40.
[6] Zhang L J. On the characterization methods of T300 carbon fiber NCF and the properties of NCF composites[D]. Beijing: Beihang University, 2012.(in Chinese) 张利军. T300碳纤维NCF织物表征及复合材料性能研究[D]. 北京: 北京航空航天大学, 2012.
[7] Xu Y J. Characterization and analysis of properties of non-crimp fabric[D]. Beijing: Beihang University, 2013.(in Chinese) 许燕杰. NCF织物的性能表征与分析[D]. 北京: 北京航空航天大学, 2013.
[8] Hivet G, Allaoui S, Soulat D, et al. Analysis of woven reinforced preforming using an experiment approach[C]//17th International Conference on Composite Materials. Edinburgh: International Committee on Composites Materials, 2009.
[9] Lomov S, Verpoest I, Barburski M, et al. Carbon composites based on multiaxial multiply stitched preforms. Part 2. KES-F characterisation of the deformability of the preforms at low loads[J]. Composites Part A: Applied Science and Manufacturing, 2003, 34(4): 359-370.
[10] Lomov S, Barburski M, Stoilova T, et al. Carbon composites based on multiaxial multiply stitched preforms. Part 3: Biaxial tension, picture frame and compression tests of the preforms[J]. Composites Part A: Applied Science and Manufacturing, 2005, 36(9): 1188-1206.
[11] Mattsson D. Mechanical performance of NCF composi-tes[D]. Lulea: Lulea University of Technology, 2005.
[12] Lomov S, Belov E, Bischoff T, et al. Carbon composites based on multiaxial multiply stitched preforms. Part 1. Geometry of the preform[J]. Composites Part A: Applied Science and Manufacturing, 2002, 33(9): 1171-1183.
[13] Truong T C, Vettori M, Lomov S, et al. Carbon composites based on multi-axial multi-ply stitched preforms. Part 4. Mechanical properties of composites and damage observation[J]. Composites Part A: Applied Science and Manufacturing, 2005, 36(9): 1207-1221.
[14] Vallons K, Zong M, Lomov S V, et al. Carbon composites based on multi-axial multi-ply stitched preforms—Part 6. Fatigue behaviour at low loads: stiffness degradation and damage development[J]. Composites Part A: Applied Science and Manufacturing, 2007, 38(7): 1633-1645.
[15] Truong T, Ivanov D, Klimshin D, et al. Carbon composites based on multi-axial multi-ply stitched preforms. Part 7: Mechanical properties and damage observations in composites with sheared reinforcement[J]. Composites Part A: Applied Science and Manufacturing, 2008, 39(9): 1380-1393.
[16] Thije R T, Loendersloot R, Akkerman R. Drape simulation of non-crimp fabrics[C]//8th Esaform Conference on Material Forming. Cluj-Napoca: University of Twente, 2005.
[17] Bel S, Hamila N, Boisse P, et al. Finite element model for NCF composite reinforcement preforming: importance of inter-ply sliding[J]. Composites Part A: Applied Science and Manufacturing, 2012, 43(12): 2269-2277.
[18] Creech G, Pickett A K. Meso-modelling of non-crimp fabric composites for coupled drape and failure analysis[J]. Journal of Materials Science, 2006, 41(20): 6725-6736.
[19] Peng X Q, Cao J. A dual homogenization and finite element approach for material characterization of textile composites[J]. Composites Part B: Engineering, 2002, 33(1): 45-46.
[20] Yu W, Harrison P, Long A. Finite element forming simulation of NCF considering natural variability of fiber direction[C]//8th Esaform Conference on Material Forming. Cluj-Napoca: University of Twente, 2005.
[21] Yu W, Harrison P, Long A. Ideal forming of non-crimp fabric preforms through optimization of blank shape and blank holding force[C]//7th Esaform Conference on Material Forming. Trondheim: University of Nottingham, 2004.
[22] Mattsson D. Mechanical performance of NCF composi-tes[D]. Lulea: Lulea University of Technology, 2005.
[23] Ding J P, Pan L J, Fan X Y, et al. Study on the mechanical properties of domestic CCF300 carbon fiber four axial directions non-crimp fabric laminates[J]. Hi-Tech Fiber & Application, 2010, 35(5): 26-31.(in Chinese) 丁江平, 潘利剑, 范欣愉, 等. 国产CCF300碳纤维4轴向无屈曲织物层合板力学性能对比研究[J]. 高科技纤维与应用, 2010, 35(5): 26-31.
[24] Han S, Duan Y X, Li C, et al. Bending properties of non-crimp stitched carbon fabric reinforced composites of different knit patterns[J]. Acta Materiae Compositae Sinica, 2011, 28(5): 52-57.(in Chinese) 韩帅, 段跃新, 李超, 等. 不同针织结构经编碳纤维复合材料弯曲性能[J]. 复合材料学报, 2011, 28(5): 52-57.
[25] Li L, Duan Y X, Li B P, et al. The effect of locked stitching on mechanical properties of different preforms reinforced composites[C]//17th National Conference on Composite Materials. Beijing: Beijing Zhonghang Era Culture Communication Co. Ltd., 2012: 644-649.(in Chinese) 李龙, 段跃新, 李保鹏, 等. 锁式缝合对不同预成型体T700/6421复合材料力学性能的影响[C]//第17届全国复合材料学术会议论文集. 北京: 北京中航时代文化传播有限公司, 2012: 644-649.
[26] Li L, Duan Y X, Li C, et al. Mechanical properties of bi-axial warp-knitted fabric T700/BMI6421 composite[J]. Acta Materiae Compositae Sinica, 2011, 28(6): 92-97.(in Chinese) 李龙, 段跃新, 李超, 等. 双轴向经编织物T700/BMI6421复合材料力学性能[J]. 复合材料学报, 2011, 28(6): 92-97.
[27] Zhu J J, Duan Y X, Chen J P, et al. Packifier parameters and permeability characteristics of non-crimp stitched carbon fabrics[J]. Acta Materiae Compositae Sinica, 2012, 29(3): 42-48.(in Chinese) 祝君军, 段跃新, 陈吉平, 等. 碳纤维经编织物定型参数及渗透特性[J]. 复合材料学报, 2012, 29(3): 42-48.
[28] Dong A, Zhao X, Zhang L, et al. NCF/BMI composites materials: effect of stitching threads[C]//The 19th International Conference on Composite Materials. Montreal: International Committee on Composites Materials, 2013.
[29] Wang Y S, Zhu S S, Yao S R, et al. Surface modification of carbon fiber and its impact on the performance of composite materials[J]. Polymer Materials Science & Engineering, 2014, 30(2): 17-20.(in Chinese) 王源升, 朱珊珊, 姚树人, 等. 碳纤维表面改性及对其复合材料性能的影响[J]. 高分子材料科学与工程, 2014, 30(2): 17-20.
[30] Wang Y F, Peng G Q, Xie F Y, et al. Effect of surface properties of domestic T700 grade carbon fiber on hygrothermal performance of BMI composites[J]. Aeronautical Manufacturing Technology, 2014(3): 90-97.(in Chinese) 王迎芬, 彭公秋, 谢富原, 等. 国产T700级碳纤维表面特性对BMI复合材料湿热性能的影响[J]. 航空制造技术, 2014(3): 90-97.
[31] Zhang S, Tian Y H, Zhang X J, et al. Effect of electrochemical oxidation on the surface structure and mechanical performance of high strength and high modulus carbon fibers[J]. Acta Materiae Compositae Sinica, 2012, 29(3): 1-8.(in Chinese) 张莎, 田艳红, 张学军, 等. 电化学氧化对高强高模碳纤维表面结构及力学性能的影响[J]. 复合材料学报, 2012, 29(3): 1-8.
[32] Xu F H, Lin Z W, Yang N B, et al. GB/T 3354 Test method for tensile properties of oriented fiber reinforced plastics[S]. Beijing: Standards Press of China, 2006.(in Chinese) 许凤和, 林再文, 杨乃宾, 等. GB/T 3354 定向纤维增强塑料拉伸性能试验方法[S]. 北京: 中国标准出版社, 2006.
[33] Zhou Z L, Zhang R Z, Zhang S Y, et al. GB/T 5258 Test method for compression properties of fiber reinforced plastics thin laminates[S]. Beijing: Standards Press of China, 2006.(in Chinese) 周祝林, 张瑞珠, 张双寅, 等. GB/T 5258 纤维增强塑料面内压缩性能试验方法[S]. 北京: 中国标准出版社, 2006.
[34] Xu F H, Yang N B, Li J C, et al.GB/T 3356 Test standard for bending property of directional fiber reinforced plastic[S]. Beijing: Standards Press of China, 2006. 许凤和, 杨乃宾,李建成, 等.GB/T 3356 单向纤维增强塑料弯曲性能试验方法[S]. 北京: 中国标准出版社, 2006.
[35] Wang L Y, Qin Z J, Yang N B, et al. JC/T 773 Test method for interply shear strength of undirctional fiber reinforced plastics[S]. Beijing: Standards Press of China, 2006.(in Chinese) 王连玉, 秦志敬, 杨乃宾, 等. JC/T 773 纤维增强塑料短梁法测定层间剪切强度[S].北京: 中国标准出版社, 2006.
[36] Qian X, Zhi J H, Chen L Q, et al. Effect of low current density electrochemical oxidation on the properties of carbon fiber-reinforced epoxy resin composites[J]. Surface and Interface Analysis, 2013, 45(5): 937-942.
[37] Sun P. Fiber reinforced polymer matrix composites’ micro interface properties research[D]. Beijing: Beihang University, 2011.(in Chinese) 孙沛. 碳纤维增强树脂基复合材料微观界面性能的研究[D]. 北京: 北京航空航天大学, 2011.
[38] Kim T H, Vijayalakshmi S, Son S J, et al. A combined study of preparation and characterization of carbon molecular sieves for carbon dioxide adsorption from coals of different origin[J]. Journal of Industrial, 2003, 9(5): 481-487.
[39] Song W, Gu A J, Liang G Z, et al. Effect of the surface roughness on interfacial properties of carbon fibers reinforced epoxy resin composites[J]. Applied Surface Science, 2011, 257(9): 4069-4074.
[40] Nguyen F N, Nakayama Y, Kobayashi D, et al. Carbon fiber’s surface and its effects on an interphase formation for ultimate and hesion-related performance[C]//Conference of the Society for the Advancement of Material and Process Engineering. Baltimore: the Society for the Advancement of Material and Process Engineering, 2012.
CJA