ACTA AERONAUTICAET ASTRONAUTICA SINICA >
A Comprehensive Error Compensation Approach Considering Machining Process for Complex Thin-wall Parts Machining
Received date: 2013-11-27
Revised date: 2014-03-14
Online published: 2014-03-20
Supported by
National Basic Research Program of China (2013CB35802)
Based on statistical analysis, the paper viewed the process of NC machining as a mathematical function with the reference model as an independent variable and the machining result as the dependent variable. Then the whole error compensation process is divided into three typical states whose process functions are built separately. With the help of the removal amount coefficient, the mathematical model of comprehensive error compensation is constructed. And the model is resolved by Taylor expansion to calculate the error compensation amount which is used to reconstruct the geometric model of the part and regenerate a new NC program. The approach is verified with a milling experiment of thin-wall blades. The maximum error was 0.031 mm after machining at the error compensation machining amount, which is 32.9% of the maximum error of 0.094 mm after machining at the normal machining amount. The result shows that the approach is efficient in improving machining quality.
YANG Jianhua , ZHANG Dinghua , WU Baohai . A Comprehensive Error Compensation Approach Considering Machining Process for Complex Thin-wall Parts Machining[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2014 , 35(11) : 3174 -3181 . DOI: 10.7527/S1000-6893.2014.0019
[1] Wu B H, Luo M, Zhang Y,et al. Advances in tool path planning techniques for 5-axis machining of sculptured surfaces[J]. Chinese Journal of Mechanical Engineering, 2008, 44(10): 9-18. (in Chinese) 吴宝海, 罗明, 张莹, 等. 自由曲面五轴加工刀具轨迹规划技术的研究进展[J].机械工程学报, 2008, 44(10): 9-18.
[2] Zhu S W, Ding G F, Qin S F, et al. Integrated geometric error modeling, identification and compensation of CNC machine tools[J]. International Journal of Machine Tools and Manufacture, 2012, 52(1): 24-29.
[3] Rao V S, Rao P V M. Tool deflection compensation in peripheral milling of curved geometries[J]. International Journal of Machine Tools and Manufacture, 2006, 46(15): 2036-2043.
[4] Shi H L, Zhao Y. New idea and methods of error design [M]. Beijing: Science Press, 2007. (in Chinese) 施浒立, 赵彦. 误差设计新理念与方法[M]. 北京: 科学出版社, 2007.
[5] Ratchev S, Liu S, Huang W, et al. Milling error prediction and compensation in machining of low-rigidity parts[J]. International Journal of Machine Tools and Manufacture, 2004, 44(15): 1629-1641.
[6] Ratchev S, Liu S, Huang W, et al. A flexible force model for end milling of low-rigidity parts[J]. Journal of Materials Processing Technology, 2004, 153-154: 134-138.
[7] Ratchev S, Liu S, Becker A A. Error compensation strategy in milling flexible thin-wall parts[J]. Journal of Materials Processing Technology, 2005, 162-163: 673-681.
[8] Ratchev S, Liu S, Huang W, et al. An advanced FEA based force induced error compensation strategy in milling [J]. International Journal of Machine Tools and Manufacture, 2006, 46(5): 542-551.
[9] Wan M. Numerical prediction of cutting forces and form errors in the milling process of thin-walled workpiece[D]. Xi'an: Northwestern Polytechnical University, 2007. (in Chinese) 万敏. 薄壁件铣削力建模与表面误差预测方法研究[D]. 西安: 西北工业大学, 2007.
[10] Wan M, Zhang W H. Overviews of technique research progress of form error prediction and error compensation in milling process[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(5): 1340-1349. (in Chinese) 万敏, 张卫红. 铣削过程中误差预测与补偿技术研究进展 [J]. 航空学报, 2008, 29(5): 1340-1349.
[11] Hu C G. Deformation control and error compensation in preeision machining of thin-walled parts[D]. Xi'an: Northwestern Polytechnical University, 2007. (in Chinese) 胡创国. 薄壁件精密切削变形控制与误差补偿技术研究 [D]. 西安:西北工业大学, 2007.
[12] Zhang Z H, Zheng L, Li Z Z, et al. Analytical mdel for end milling surface geometrical error with considering cutting force/torque[J]. Chinese Journal of Mechanical Engineering, 2001, 37(1): 6-10. (in Chinese) 张智海, 郑力, 李志忠, 等. 基于铣削力/力矩模型的铣削表面几何误差模型[J]. 机械工程学报, 2001, 37(1): 6-10.
[13] Chen W F, Xue J B, Tang D B, et al. Deformation prediction and error compensation in multilayer milling processes for thin-walled parts[J]. International Journal of Machine Tools and Manufacture, 2009, 49(11): 859-864.
[14] Cho M W, Seo T I, Kwon H D. Integrated error compensation method using OMM system for profile milling operation[J]. Journal of Materials Processing Technology, 2003, 136(1-3): 88-99.
[15] Chen Y P, Gao J, Deng H X, et al. Spatial statistical analysis and compensation of machining errors for complex surfaces[J]. Precision Engineering, 2013, 37(1): 203-212.
[16] Lin X J, Liu W W, Ren J X, et al. Deformation error compensation of manufacturing thin-wall blade[J]. Aeronautical Manufacturing Technology, 2010, 14: 54-56. (in Chinese) 蔺小军, 刘维维, 任军学, 等. 薄壁叶片加工变形误差补偿技术[J]. 航空制造技术, 2010, 14: 54-56.
[17] Liu W W, Li J G, Zhao M, et al. Research on the compensation of deformation error in NC machining of thin-walled blades[J]. Machinery Design ＆ Manufacture, 2009, 10:175-177. (in Chinese) 刘维伟, 李杰光, 赵明, 等. 航空发动机薄壁叶片加工变形误差补偿技术研究[J]. 机械设计与制造, 2009, 10:175-177.
/
| 〈 |
|
〉 |
CJA