ACTA AERONAUTICAET ASTRONAUTICA SINICA >
Numerical Study on Fluid-structure Interaction of Slot-parachute’s Inflation Process
Received date: 2012-11-07
Revised date: 2013-05-17
Online published: 2013-06-09
Supported by
National Natural Science Foundation of China (11272345,51375486);Research Project of National Defense Technology University(JC13-01-04)
To investigate the complex dynamic interaction behaviors of a slot-parachute, a numerical simulation analysis is performed on the inflation process of a slot-parachute used in airdrop. Based on the parametric design language, a fluid-structure interaction (FSI) model is built which consists of a 3D initially folded slot-parachute structure with a cylindrical fluid domain. Then, an FSI dynamics solver is set up by the Euler-Lagrangian penalty algorithm and multi-material ALE (Arbitrary Lagrange Euler) method specifically for the solving of low speed incompressible fluid fields around a canopy. The structure dynamic behaviors of the canopy fabric are predicted, and a non-linear damped material model of a rope is developed. Meanwhile, the inflation characteristics of the slot-parachute in different inflowing velocities are analyzed, including the variation of projective area and opening loads. The 3D simulation results of inflation are validated by comparing with the airdrop test results. Finally, the slot-parachute’s FSI characteristics are acquired, including its structure intensity and the evolvement of flow during the inflation process. The results demonstrate that the 3D profile change of the canopy is consistent with the airdrop test, and the slot-parachute can rapidly keep steady after fully inflated without the occurrence of obvious breath phenomenon. The stress near the slots is obviously higher than the average level on the canopy surface. To avoid the breakage of the fabric structure under the actions of complex airflow pressure, reinforcements should be taken. A symmetrically reverse rotated vortex couple appears on top of the canopy during the inflation process, and then it is extruded to dissymmetry before being separated and brushed off by airflow.
GAO Xinglong , TANG Qian'gang , ZHANG Qingbin , LI Jinhong . Numerical Study on Fluid-structure Interaction of Slot-parachute’s Inflation Process[J]. ACTA AERONAUTICAET ASTRONAUTICA SINICA, 2013 , 34(10) : 2265 -2276 . DOI: 10.7527/S1000-6893.2013.0264
[1] Zhu Y, Liu L. Dynamic model of parachute-projectile systems based on Lagrange mechanics. Acta Aeronautica et Astronautica Sinica, 2009, 30(7): 1208-1213. (in Chinese) 朱勇, 刘莉. 基于拉格朗日力学的伞-弹系统动力学模型. 航空学报, 2009, 30(7): 1208-1213.
[2] Tang Q G, Zhang Q B, Zhang X J, et al. Nine-degree-of-freedom model of bomb-parachute system. Acta Arm amentarii, 2007, 28(4): 449-452.(in Chinese) 唐乾刚, 张青斌, 张晓今, 等. 伞-弹系统九自由度动力学模型. 兵工学报, 2007, 28(4): 449-452.
[3] Shu J R, Wang B G, Han Z P, et al. Analysis on three body motion of parachute-projectile system. Acta Aeronautica et Astronautica Sinica, 2001, 22(6): 481-485. (in Chinese) 舒敬荣, 王宝贵, 韩子鹏, 等. 伞-弹系统三体运动分析. 航空学报, 2001, 22(6): 481-485.
[4] Zhu X, Cao Y H. Numerical simulation of planform geometry effect on parafoil aerodynamic performance. Acta Aeronautica et Astronautica Sinica, 2012, 33(11): 1998-2007. (in Chinese) 朱旭, 曹义华. 翼伞平面形状对翼伞气动性能的影响. 航空学报, 2012, 32(11): 1998-2007.
[5] Zhu X, Cao Y H. Effects of arc-anhedral angle, airfoil and leading edge cut on parafoil aerodynamic performance. Acta Aeronautica et Astronautica Sinica, 2012, 33(7): 1189-1200. (in Chinese) 朱旭, 曹义华. 翼伞弧面下反角、翼型和前缘切口对翼伞气动性能的影响. 航空学报, 2012, 33(7): 1189-1200.
[6] Wu Z, Cao Y H, Song Q F. Numerical simulation of fluid-structure interaction in conical parachute's opening process. Journal of Aerospace Power, 2009, 24(7): 1584-1593. (in Chinese) 吴卓, 曹义华, 宋乾福. 锥型降落伞开伞过程流动结构相互作用的数值模拟. 航空动力学报, 2009, 24(7): 1584-1593.
[7] Peng Y, Zhang Q B, Qin Z Z. Simulation of parachute final inflation phase. Journal of National University of Defense Technology, 2004, 26(2): 13-16. (in Chinese) 彭勇, 张青斌, 秦子增. 降落伞主充气阶段数值模拟. 国防科技大学学报, 2004, 26(2): 13-16.
[8] Yu L, Shi X L, Ming X. Numerical simulation of parachute during opening process. Acta Aeronautica et Astronautica Sinica, 2007, 28(1): 52-57. (in Chinese) 余莉, 史献林, 明晓. 降落伞充气过程的数值模拟. 航空学报, 2007, 28(1): 52-57.
[9] Brooks A N, Hughes T J R. Streamling upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations. Computer Methods in Applied Mechanics and Engineering, 1982, 32(1-3): 199-259.
[10] Tezduyar T E, Behr M, Mittal S, et al. Stabilized finite element formulations for incompressible flow computations. Advances in Applied Mechanics, 1992, 28: 1-44.
[11] Tezduyar T E, Behr M, Liou J. A new strategy for finite element computations involving moving boundaries and interfaces-the deforming-spatial-domain/space-time procedure: I. The concept and the preliminary numerical tests. Computer Methods in Applied Mechanics and Engineering, 1992, 94(5): 339-351.
[12] Kalro V, Tezduyar T E. A parallel 3D computational method for fluid-structure interactions in parachute systems. Computer Methods in Applied Mechanics and Engineering, 2000, 190(20): 321-332.
[13] Stein K, Benney R, Tezduyar T E, et al. Fluid-structure interactions of a cross parachute: numerical simulation. Computer Methods in Applied Mechanics and Engineering, 2001, 191(2): 673-687.
[14] Stein K, Benney R, Tezduyar T E. Fluid-structure interactions of a round parachute: modeling and simulation techniques. Journal of Aircraft, 2001, 38 (5): 800-808.
[15] Takizawa K, Spielman T, Tezduyar T E. Space-time FSI modeling and dynamical analysis of spacecraft parachutes and pracachute clusters. Computational Mechanics, 2011, 48(1): 345-364.
[16] Takizawa K, Tezduyar T E. Computational methods for parachute fluid-structure interactions. Archives Computational Methods in Enggineering, 2012, 19(2): 125-169.
[17] Ibos C, Lacroix C, Chuzet L, et al. SINPA, a full 3D fluid-structure softwar for parachute simulation. AIAA-1997-1508, 1997.
[18] Tutt B A, Taylor A P. The use of LS-DYNA to simulate the inflation of a parachute canopy. 18th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. Munich: American Institute of Aeronautics and Astronautics, 2005: 1608-1617.
[19] Coquet Y, Bordenave P. Improvements in fluid structure interaction simulations of parachute using LS-DYNA. 21st AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar. Dublin: American Institute of Aeronautics and Astronautics, 2011: 2590-2598.
[20] Ergun S. Fluid flow through packed beds. Chemical Engineering Progress, 1952, 48(2): 89-94.
[21] Fredette R O. Parachute research above critical aerodynamic velocities. Journal of Aircraft, 1961, 1(11): 602-603.
[22] Ewing E G, Knacke T W, Bixby H W. Recovery systems design guide. Wu J P, translated. Beijing: Aviation Industry Press, 1988: 223-224. (in Chinese) Ewing E G, Knacke T W, Bixby H W. 回收系统设计指南. 吴剑萍, 译. 北京: 航空工业出版社, 1988: 223-224.
[23] Wang L R. Parachute theory and application. Beijing: China Astronautic Publishing House, 1997: 102-104. (in Chinese) 王利荣. 降落伞理论与应用. 北京: 宇航出版社, 1997: 102-104.
/
〈 | 〉 |